EML30 Series AC-DC Power Supplies 30 Watts • Compact Size • Medical Approvals • Single Outputs from 3.3 to 48 V • PCB Mount, Open Frame & Chassis Mount • Encapsulated PCB & Chassis Mount • Class II • Peak Load Capability The EML30 is a series of open frame and encapsulated AC-DC single output power supplies designed for medical applications. The series provides a number of flexible mechanical options including PCB mount, open frame, chassis mount with screw terminals and a DIN Rail option. With approvals to world-wide medical safety standards, compliance with class B for both conducted and radiated emissions and a 130%, 30s peak load capability, these class II isolation parts benefit system designers with easy integration into the latest healthcare products and applications. Dimensions: EML30: (P ): 2.96 x 1.36 x 1.05” (T ): 3.46 x 1.36 x 1.00” (E ): 3.10 x 1.50 x 1.10” (S): 3.78 x 1.57 x 1.12” (75.2 x 34.6 x 26.7 mm) (87.9 x 34.6 x 25.4 mm) (78.7 x 38.1 x 27.9 mm) (96.0 x 40.0 x 28.5 mm) Models & Ratings Output Power Output Voltage Output Current Nominal Peak (1) Model Number (2,3) 20 W 3.3 VDC 6.00 A 7.80 A EML30US03 30 W 5.0 VDC 6.00 A 7.80 A EML30US05 30 W 9.0 VDC 3.33 A 4.33 A EML30US09 30 W 12.0 VDC 2.50 A 3.25 A EML30US12 30 W 15.0 VDC 2.00 A 2.60 A EML30US15 30 W 24.0 VDC 1.25 A 1.63 A EML30US24 30 W 36.0 VDC 0.83 A 1.08 A EML30US36 30 W 48.0 VDC 0.62 A 0.81 A EML30US48 Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal. 2. Add suffix to model number to define type: add ‘-P’ for PCB mount, add ‘-T’ for chassis mount, add ‘-E’ for encapsulated, add ‘-S’ for screw terminals. 3. A Screw terminal version (-S) is available with DIN clip attached, add suffix ‘D’, e.g. EML30US24-SD, DIN rail mounting kit is available as a seperate item, order code ECL25/30 DIN CLIP. Summary Characteristic Input Voltage Range Minimum Operating Temperature 1 Maximum Units Notes & Conditions Derate from 100% at 90 VAC to 90% at 85 VAC 85 264 VAC 120 370 VDC No Load Input Power Efficiency Typical 0.3 W 79 88 % -20 +70 °C Derate linearly from 100% at +50 °C to 50% at +70 °C EMC EN55022 Level B Conducted & Radiated, EN61000-4, EN61000-3, EN60601-1-2 Safety Approvals EN60601-1, ANSI/AAMI ES60601-1. IEC60601-1 www.xppower.com EML30 Series AC-DC Power Supplies Input Characteristic Minimum Input Voltage Range 85 Input Frequency 47 Input Current - Full Load Typical Maximum Units 264 VAC 63 0.55/0.32 No Load Input Power Hz A rms 0.3 Inrush Current At 115/230 VAC W 20/40 A Earth Leakage Current Input Protection Notes & Conditions At 115/230 VAC Class II construction no earth Internal T2.0 A/250 VAC fuse fitted in line and neutral Output Characteristic Minimum Output Voltage 3.3 Typical Maximum Units 48 VDC Notes & Conditions Initial Set Accuracy ±1 % Output Voltage Adjustment ±5 % Not encapsulated units A No minimum load required Minimum Load 0 Start Up Delay 2 s Start Up Rise Time 14 ms Hold Up Time 12 ms Line Regulation ±0.5 % Load Regulation ±1 % Transient Response 4 % Overload Protection Deviation, recovery within 1% in less than 500 µs for a 25% load change 50 mV pk-pk 3.3-5 V versions, 20 MHz bandwidth 120 mV pk-pk 12-15 V versions, 20 MHz bandwidth 200 mV pk-pk 24-48 V versions, 20 MHz bandwidth 216 % Vnom 3.3 V versions, recycle input to reset 115 140 % Vnom All other versions, recycle input to reset 120 185 % 0.05 %/˚C Maximum Units 88 % Ripple & Noise Overvoltage Protection at full load and 115 VAC 195 Short Circuit Protection Trip & Restart (hiccup mode) Temperature Coefficient General Characteristic Efficiency Isolation: Input to Output Minimum Typical 79 4000 VAC 70 Switching Frequency Power Density kHz 7 Mean Time Between Failure Weight Notes & Conditions W/in3 PCB Mount version >400 kHrs MIL-HDBK-217F, +25 °C GB 0.13 (60) lb (g) Open frame versions 0.35 (160) lb (g Encapsulated version 0.37 (170) lb (g Screw terminal version Notes & Conditions Environmental Characteristic Maximum Units Operating Temperature Minimum -20 Typical +70 °C Storage Temperature -40 +85 °C 95 %RH 3048 m Cooling Humidity Operating Altitude Derate linearly from 100% at +50 °C to 50% at +70 °C Convection-cooled Shock IEC68-2-27, 30 g, 11 ms half sine, 3 times in each of 6 axes Vibration IEC68-2-6, 2 g, 10 Hz to 500 kHz, 10 mins/cycle, 60 mins each cycle www.xppower.com Non-condensing 2 EML30 Series AC-DC Power Supplies EMC: Emissions Phenomenon Conducted Standard Test Level EN55022/11:2010 Class B Class B Radiated EN55022/11:2010 Harmonic Current EN61000-3-2 Voltage Flicker EN61000-3-3 Criteria Notes & Conditions Class A EMC: Immunity Test Level Criteria ESD EN61000-4-2 3 A 6 kV contact, 8 kV air discharge Radiated EN61000-4-3 10 V/m A 80% mod Phenomenon Standard EFT EN61000-4-4 3 A Surges EN61000-4-5 3 A Conducted EN61000-4-6 10 Vrms A Magnetic Fields EN61000-4-8 30 A/m A 70% UT (70 VAC) for 500 ms A 40% UT (40 VAC) for 100 ms A <5% UT (0 VAC) for 10 ms A EN60601-1-2 (100 VAC) Dips and Interruptions EN60601-1-2 (240 VAC) <5% UT (0 VAC) for 5000 ms B 70% UT (168 VAC) for 500 A 40% UT (96 VAC) for 100 ms A <5% UT (0 VAC) for 10 ms A <5% UT (0 VAC) for 5000 ms B Notes & Conditions Derate output power to 10 W Safety Approvals 3 Safety Agency Safety Standard CB Report IEC60601-1 Ed 3 Including Risk Management Notes & Conditions Medical UL ANSI/AAMI ES60601-1:2005 & CSA C22.2, No.60601-1:08 Medical TUV EN60601-1/A11:2011 Medical Means of Protection Category Primary to Secondary 2 x MOPP (Means of Patient Protection) IEC60601-1 Ed 3 www.xppower.com EML30 Series AC-DC Power Supplies Mechanical Details Open Frame PCB Mount (P) Encapsulated (E) ACN 0.59 (14.9) 1.36 (34.6) 1.18 (29.9) 0.09 (2.29) 3.10 (78.7) 0.13 (3.2) ACN 1.18 (30.0) ACL +Vo VR 0.05 (1.40) 2.8 (72.39) TOP VIEW -Vo 0.16 (4.1) 0.17 (4.4) 1.50 (38.1) +Vo ACL 0.09 (2.29) 2.85 (72.4) 2.96 (75.2) 0.15 (3.8) 0.59 (15.0) -Vo 1.10 (27.9) 1.05 (26.7) 4x ø 0.04 (ø1.0) 0.03 (1.0) 0.39 (10.0) 0.07 (1.8) Open Frame Chassis Mount (T) Screw Terminal (S) 3.43 (87.0) 15 (3.81) 3.46 (87.9) 0.44 (11.2) 3.2 (81.28) 4- 0.15 ( 3.8) 0.13 (3.3) TOP VIEW ACN 1.36 (34.6) Pin 1 Pin 2 -Vout 1.1 Pin 3 Output (27.9) Pin 4 0.13 Pin 5 +Vout (3.3) Pin 6 Input Pin 3 : ACN Pin 2 : NC Pin 1 : ACL ACL 1.57 (40.0) 0.39 (10.0) 0.88 (22.4) 0.12 max 1.0 (3.0) (25.4) -Vo 0.84 (21.3) 1.20 +Vo (30.5) 3.01 (76.4) VR 00 4) 4x ø0.14 (4x ø3.5) 1º 1.12 (28.5) 0.27 (6.8) 0.10 (2.5) 3.78 (96.0) Optional DIN clip Notes 1. Dimensions in inches (mm). 2. Weight: P Version: 0.13 lbs (60 g) T Version: 0.13 lbs (60 g) E Version: 0.35 lbs (160 g) S Version: 0.37 lbs (170 g) 3. Tolerances: x.xx = ± 0.02 (x.x = ± 0.5) x.xxx = ± 0.01 (x.xx = ± 0.25) Mating Connectors (-T version only) Input Connector: JST XHP-3 Output Connector: JST XHP-6 Crimps: SPH-002T-P0.5S Cable harness with 300mm wire available, order part no. ECL25 LOOM KIT www.xppower.com 24 Nov 14