Panasonic ERQ14ZJ101E Metal film fusing resistors, erqa, z Datasheet

Metal Film
Fusing Resistors, ERQA, Z
Metal Film Fusing Resistors
Type: ERQA
ERQZ
(0.25 W, 0.5 W, 1 W, 2 W coating type)
■ Features
●
●
●
●
●
Accurate fusing
Small size and lightweight
Uniform quality, consistent performance and reliability
Flame retardant, utilizing exclusive silicon insulation material
Reference Standard
EIAJ RC-2125
■ Construction and Materials
Metal alloy film
Lead wire
Spiraling turns
Insulative lacquer
Ceramic core
Marking
End cap
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006
Metal Film
Fusing Resistors, ERQA, Z
■ Explanation of Part Numbers
1
2
3
E
R
Q
Product Code
Metal Film
Fusing Resistors
Power Rating at
70 °C amb.
0.25 W
14
0.5 W
12
1
2
1W
2W
4
5
6
7
8
9
10
11
2
A
B
J
1
0
1
Special Feature
A
Standard
Z Less than 2 액
AB
Z
Resistance Value
The first two digits are
significant figures of
resistance and the third
one denotes number of
zeros following.Decimal
point is expressed by R as
2.2=2R2.
Resistance
Tolerance
J
±5 %
Standard
Less than 2 액
12
Suffix for Packaging and/or
Cut & Formed Leads
Nil
P
P···S
E
W···E
Std.bulk packing
P type cut & formed
P···S type cut & formed
Radial Taped & Box
Radial Taped & Box
The above example shows a standard Metal Film Fusing Resistors, 2 W power rating, resistance value of 100 , tolerance of ±5 %, and package of
standard bulk packing.
■ Ratings
Type
ERQ14Z
ERQ14A
ERQ12Z
ERQ12A
ERQ1Z
ERQ1AB
ERQ2Z
ERQ2AB
Dielectric
Maximum
Power
Open Maximum With- Resistance
Rating
Circuit Overload standing Tolerance
at 70°C
(1)
Voltage
Voltage Voltage
(%)
(W)
(V)
(V)
0.25
200
0.5
250
1
250
2
250
3 times of
rated
(2)
voltage
AC 350
J (± 5)
AC 350
J (± 5)
AC 600
J (± 5)
AC 1000
J (± 5)
Resistance
Range ()
min.
max.
1.0
2.0
1.0
2.0
1.0
2.0
1.0
2.0
1.8
470
1.8
560
1.8
560
1.8
560
Standard Marking
Mass
T.C.R.
-6
[10 /°C Resistance Method (Weight)
(ppm/°C)] Values on Body [g/pc.]
Color
code
Color
code
±350
E24
±350
E24
±350
E24
Stamp
±350
E24
Stamp
0.24
(0.53 lbs.)
0.32
(0.71 lbs.)
0.64
(1.41 lbs.)
1.54
(3.35 lbs.)
(1) Maximum Open Circuit Voltage: Referring to the maximum value of the voltage applied between terminals of the resistor when the resistor is opened
in an electric circuit 1000 times power rating or voltage specified above whichever less is regarded as the maximum open circuit voltage.
(2) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=Power RatingResistance Value
120
100
Rated load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
–30 ˚C
70 ˚C
ERQ1
ERQ2
80
60
40
ERQ14
ERQ12
150 ˚C
20
0
–60 –40 –20 0
130 ˚C
20 40 60 80 100 120 140 160 180 200 220
Ambient temperature (˚C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006
Metal Film
Fusing Resistors, ERQA, Z
■ Dimensions in mm (not to scale)
Dimensions (mm)
Type
fD
l
+1.5
–1.0
2.3
fd
±0.5
30.0
±0.5
30.0
±1.0
30.0
±1.0
38.0
ERQ14
6.3
ERQ12
9.0 –1.0
+1.5
2.8
ERQ1
12.0 –1.0
+1.5
4.0
ERQ2
15.0
±1.5
5.5
fd
L
k
fD
L
l
±3.0
0.65
±0.05
±3.0
0.65
±3.0
0.80
±3.0
0.80
±0.05
±0.05
±0.05
■ Explanation of Marking
Type 14, 12
1st significant
figure
Q Shows Fuse Resistor
2nd significant figure
White color
shows Fuse Resistor
1W
100J
711
Q
Resistance tolerance
Symbol
Power rating
Manufacturing
Series No.
105
Multipier
Type 1, 2
Date code
(Year, Month, Week)
Resistance value and tolerance
■ Cut & Formed Type
ERQ첸첸AJ첸첸첸P
ERQ첸첸ZJ첸첸첸P
S
fD
4.0±1.0
h
f0.65±0.05
L
0.8
1.2±0.2
3 max.
Part No.
Power Rating
at 70 °C
(W)
Standard
Q’ty/Packing
(pcs.)
Dimensions (mm)
fD
L
+1.5
–1.0
2.3
+1.5
2.8
ERQ14첸J첸첸첸P
0.25
2000
6.3
ERQ12첸J첸첸첸P
0.5
2000
9.0 –1.0
ERQ첸ABJP첸첸첸S
ERQ첸ZJP첸첸첸S
S
10.0
±0.5
12.5
h
±0.5
S
±1.5
4.0
±1.5
±1.5
4.0
±1.5
fD
1.0
1.4±0.2
4.0±1.5
h
f0.80±0.05
L
3.5 max.
Part No.
Power Rating
at 70 °C
(W)
Standard
Q’ty/Packing
(pcs.)
Dimensions (mm)
fD
L
+1.5
–1.0
4.0
±1.5
5.5
ERQ1첸첸JP첸첸첸S
1
1000
12.0
ERQ2첸첸JP첸첸첸S
2
1000
15.0
S
15.0
±1.0
20.0
h
±1.0
±1.5
6.0
±2.0
6.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
±1.5
±1.5
Feb. 2006
Metal Film
Fusing Resistors, ERQA, Z
■ For Panasert Automatic Insertion Machine Radial Tape & Box
Insulated
Lead
P
P2
D
H1
A
Type ERQ첸첸AJ첸첸첸E
ERQ첸첸ZJ첸첸첸E
(14A/14Z, 12A/12Z, 1AB/1Z)
P1
W1
H0
F
fD0
P0
Dimensions (mm)
Dimensions (mm)
Dimensions (mm)
14A/14Z
12.7±1.0
W
18.0±0.5
12.7±0.3
W1
9.0±0.5
P1
3.85±0.70
P2
6.35±1.00
H0
16.0±0.5
5.0±0.8
fD0
4.0±0.2
H1
Dimensions (mm)
12 max.
P
P0
F
W
fd
12A/12Z 15.5 max.
1AB/1Z
14A/14Z
A
19 max.
Dimensions (mm)
6.35
+0.65
–0.35
+1.5
12A/12Z
9.0 –1.0
1AB/1Z
12.0 –1.0
fd
14A/14Z
D
+1.5
2.3±0.5
12A/12Z
2.8±0.5
1AB/1Z
4.0±1.0
0.65±0.05
● Radial Tape Packaging Methods
Dimensions (mm)
b
Part Number
Marking
c
a
Standard Quantity
(pcs./box)
a
b
c
ERQ14AJ첸첸첸E
ERQ14ZJ첸첸첸E
46
130
335
2000 pcs./box
ERQ12AJ첸첸첸E
ERQ12ZJ첸첸첸E
46
130
335
2000 pcs./box
ERQ1ABJ첸첸첸E
ERQ1ZJ첸첸첸E
49
100
335
1000 pcs./box
■ For Panasert Automatic Insertion Machine Radial Taped & Box
Type ERQ첸첸A/ZJW첸첸첸E (14A/14Z, 12A/12Z, 1AB/1Z)
P1
P
P
B
fD
A
H1
P0
P1
F
H0
P2
W1
P2
W
F
W
fd
P0
Dimensions (mm)
Dimensions (mm)
14A/14Z
12.7±1.0
14A/14Z
6.5 – 0
12A/12Z, 1AB/1Z
30.0±1.0
12A/12Z
6.5 – 0
14A/14Z
12.7±0.3
1AB/1Z
6.5 – 0
12A/12Z, 1AB/1Z
15.0±0.3
14A/14Z
6.35±1.00
12A/12Z, 1AB/1Z
7.5±1.0
14A/14Z
3.85±0.70
12A/12Z, 1AB/1Z
3.75±0.50
14A/14Z
5.0 –0.2
12A/12Z, 1AB/1Z
7.5 –0.2
H0
fD0
A
B
+0.6
9.0±0.5
14A/14Z
16.0±0.5
12A/12Z
18.0±1.0
1AB/1Z
18.0±1.0
fD
fd
+1.0
+1.0
4.0±0.2
14A/14Z
18.0±0.5
W1
fD0
+0.6
H1
+0.6
+0.65
6.35 –0.35
+1.5
–1.0
12A/12Z
9.0
1AB/1Z
12.0 –1.0
14A/14Z
11.2 max.
+1.5
12A/12Z
14 max.
1AB/1Z
17 max.
14A/14Z
2.3 –0.3
+0.5
12A/12Z
2.8±0.5
1AB/1Z
4.0±1.0
14A/14Z
0.65±0.05
12A/12Z, 1AB/1Z
0.80±0.05
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006
Metal Film
Fusing Resistors, ERQA, Z
■ Performance Specifications
Characteristics
Specifications
Rated Res. Value
Power
()
Limit
Open within
30 seconds
at 30 times
the rated
power
0.25 W
0.5 W
1 to 1.8
Fusing
Characteristics
Test Methods
1 W
2 W
0.25 W
0.5 W
2 to 9.1
1 W
2 W
0.25 W 10 to 470
0.5 W
1 W
10 to 560
2 W
Open within
30 seconds
at 25 times
the rated
power
Open within
30 seconds
at 16 times
the rated
power
The test potential shall be preadjusted using a dummy
resistor and then be subjected to the test specimens.
The potential shall be readjusted within two seconds to
reach the exact value of specified current. This test
shall be made under the conditions at 20 °C and 65 %
RH (or at a temperature of 5 °C to 35 °C and 45 to
85 % RH, only when any doubt may not be caused),
and the use of stabilized power source is suggested.
Fusing time shall be measured as the duration until the
circuit current is decreased to a 1/50 the initial test
current or less.
Open within
30 seconds
at 12 times
the rated
power
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006
Metal Film
Fusing Resistors, ERQA, Z
■ Fusing Characteristics (Constant Voltage Circuit)
This data is for reference only, specifications should be verified in written form with the engineering division.
ERQ14A
200
ERQ12A
200
2.0 to 9.1 ()
2.0 to 9.1 ()
10 to 560 ()
100
100
50
50
Fusing time (s)
Fusing time (s)
10 to 470 ()
30
10
5
1
30
10
5
0
7
9
12
16
20
25
Multiple of the power rating
ERQ1AB
200
1
30
0
9
12
16
20
25
Multiple of the power rating
ERQ2AB
200
2.0 to 9.1 ()
7
2.0 to 9.1 ()
10 to 560 ()
100
100
50
50
Fusing time (s)
Fusing time (s)
10 to 560 ()
30
10
5
1
30
30
10
5
0
7
9
12
16
20
25
Multiple of the power rating
1
30
0
7
9
12
16
20
25
Multiple of the power rating
30
■ Hot Spot Temperature (for reference)
Temperature rise 왕T (K)
600
500
2AB
400
Measuring point
1AB
300
12A
200
100
14A
0
0
1
2
3
4
5
6
7
8
Multiple of the power rating
9
10
11
12
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006
Metal Film
Fusing Resistors, ERQA, Z
Safety Precautions
The following are precautions for individual products. Please also refer to the precautions common to Fixed Resistors
shown on page ER3 of this catalog.
1. Checking the fusing conditions
1) Fusing characteristics differ depending on the type, shape, and resistance. Check the fusing conditions before
selecting the type of Metal Film Fusing Resistors (hereafter called the fusing resistor) to be used.
2) Use the fusing resistors under the maximum open circuit voltage. Otherwise, arcing may occur when a voltage
much higher than the rated one is applied in the event of an abnormality in the circuit, or when a high voltage
is applied after fusing.
3) Under abnormal conditions of a constant voltage circuit, a current of about 2 or 3 times the initial abnormal
current passes through, accelerating the speed at which the fusing resistors blows. When using a constant
current circuit, carefully check the conditions because the fusing resistors may not blow in a constant current
circuit.
2. Checking for pulse voltage, impact voltage, and transient voltage
Make sure to evaluate and check the fusing resistors mounted on your product if they are to be mounted on a
circuit that generates an impact voltage, or if there is a possibility that the transient phenomenon (significantly
high voltage applied in a short time) may occur or that a pulse voltage with a high peak voltage may be applied.
Make sure to consult our sales staff before using the fusing resistors under special conditions.
3. Conditions of use in a steady state
Make sure that the load conditions have a sufficient allowance for the power derating curve. The characteristics of
the fusing resistors are set by using a constant voltage circuit.
4. The solvent resistance of the fusing resistors is not assured. If you use a solvent for cleaning after soldering or
other processes, make sure to consult our sales staff before use and per form a prior test and evaluation to
ensure that the solvent will not affect the reliability of the fusing resistors.
(Data for Reference)
Pp (Vp)
■ Pulse Characteristics (Usual)
t
T
PP
VP
t
T
VR
P
R
Vp max.
Withstand pulse limit power is calculated by the next
method.
PP = K · P · T/t
VP = K · P · R · T/t
Reference to the right about a fixed number of VP max.
:
:
:
:
:
:
:
:
Pulse limit power (W)
Pulse limit voltage (V)
Pulse continuous time (s)
Period (s)
Rated voltage (V)
Rated power (W)
Resistance value ()
Max. pulse limit voltage (V)
Type
K
Vp max. (V)
ERQ14A
0.6
200
ERQ12A
0.6
250
ERQ1AB
0.6
250
ERQ2AB
0.4
250
● T>1(s) 촞 T=1(s)
● T/t>100 촞 T/t=100
● PP<P 촞 P stands for PP
(VP<VR 촞 VR stands for VP)
● Added voltage<Vp max.
● PP or VP is reference value
Conditions : Pulse added time=1000 h, Resistance change=±5 %
Room temperature
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006
Safety Precautions
(Common precautions for Fixed Resistors)
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject
to change without prior notice.
• Do not use the products beyond the specifications described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage to
vehicles (au to mo bile, train, vessel), traffi c lights, medical equipment, aerospace equipment, elec tric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
✽ Systems equipped with a protection circuit and a protection device
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
(1) Precautions for use
• These products are designed and manufactured for general and stan dard use in general elec tron ic
equipment (e.g. AV equipment, home electric ap plianc es, offi ce equipment, information and com mu ni cation
equipment)
• These products are not intended for use in the following special conditions. Before using the products, carefully
check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. Electric Static Discharge (ESD) Environment
These components are sensitive to static electricity and can be damaged under static shock (ESD).
Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
5. Electromagnetic Environment
Avoid any environment where strong electromagnetic waves exist.
6. In an environment where these products cause dew condensation
7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin
or other materials
• These products generate Joule heat when energized. Carefully position these products so that their heat will not
affect the other components.
• Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or
inflammables, such as vinyl-coated wires, near these products .
• Note that non- cleaning solder, halogen-based highly active fl ux, or water-soluble fl ux may deteriorate the
performance or reliability of the products.
• Carefully select a fl ux cleaning agent for use after soldering. An unsuitable agent may deteriorate the
performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave
water residues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your
company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 °
C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their
electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials)
may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
Feb. 2006
– ER3 –
Similar pages