HCMOS 2.5x2mm 1.8V Oscillator Model: F210 SERIES Page 1 of 2 Rev. 9/17/2012 RoHS & REACH Compliant http://www.foxonline.com/need_a_sample.htm FEATURES • Standby Function • Tape and Reel (3,000 pcs. STD) • PART NUMBER SELECTION Part Number 819-Frequency-xxxxx 819A-Frequency-xxxxx 819B-Frequency-xxxxx 819C-Frequency-xxxxx 819D-Frequency-xxxxx 819E-Frequency-xxxxx Model Frequency Operating Number Stability1 Temperature (ºC) ±100PPM -10 ~ +70 F210 -40 ~ +85 F210R ±100PPM ±50PPM -10 ~ +70 F215 ±50PPM -40 ~ +85 F215R ±25PPM -10 ~ +70 F216 -40 ~ +85 F216R ±25PPM* Frequency Range (MHz) 0.750 ~ 50.000 0.750 ~ 50.000 0.750 ~ 50.000 0.750 ~ 50.000 0.750 ~ 50.000 1.800 ~ 50.000 2.6 Ma x T op V ie w 2.1 m a x #2 #1 Dot de note s p in 1 . • ELECTRICAL CHARACTERISTICS PARAMETERS #3 #4 MAX (unless otherwise noted) Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 0.750 ~ 10.000 MHz 10.000+ ~ 20.000 MHz 20.000+ ~ 30.000 MHz 30.000+ ~ 40.000 MHz 40.000+ ~ 50.000 MHz Output Symmetry (50% VDD) Rise Time (10% ~ 90% VDD) Fall Time (90% ~ 10% VDD) Output Voltage (VOL) (VOH) Output Current (IOL) (IOH) Output Load (HCMOS) Standby Current Start-up Time (TS) Output Disable Time 2 Output Enable Time 2 Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish 1.0 Ma x 0.750 ~ 50.000 MHz -55ºC ~ +100ºC 1.8V ± 5% 2.5mA 3.5mA 4.0mA 4.5mA 5.0mA 45% ~ 55% 10nS 10nS 10% VDD 90% VDD Min 2mA Min -2mA Min 15pF 10µA 10mS 10uS 10mS 260ºC / 10 Seconds 1 Au 0.78 B ottom V ie w #1 #2 #4 #3 0.65 0.68 0.95 R e c om m e nde d S o ld e r P a d L a y o u t 0.95 0.8 0.65 0.9 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, reflow, and one year aging *Excludes Shock/Vibration. 2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. 1 All dimensions are in millimeters. Note: A 0.01µF capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply noise. ~Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary. All specifications subject to change without notice. P in C o n n e c t io n s # 1 E /D #2 GND # 3 O u t pu t # 4 V DD • ENABLE / DISABLE FUNCTION Pin 1 OUTPUT (Pin 3) OPEN2 ACTIVE '1' Level VIH ≥ 70% VDD ACTIVE '0' Level VIL ≤ 30% VDD High Z FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .1283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 © 2012 FOX ELECTRONICS | ISO9001:2008 Certified HCMOS 2.5x2mm 1.8V Oscillator Model: F210 SERIES Page 2 of 2 RoHS & REACH Compliant • TAPE SPECIFICATIONS (millimeters) MODEL F210 Series A ∅1.5 FOXElectronics Rev. 9/17/2012 http://www.foxonline.com/need_a_sample.htm • REEL SPECIFICATIONS (millimeters) B C D E F STD Reel QTY MODEL F210 Series 4.0 4.0 3.5 8.0 1.15 3,000 G I J K L M H 2.0 ∅13 ∅21 ∅60 ∅180 9.0 2.0 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .1283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 © 2012 FOX ELECTRONICS | ISO9001:2008 Certified 63