DynaCOR 1 0 - 0 0 • • • • • • • Connected, Rugged Mobile Computer EN50155 qualified Rugged and low power Based on Intel® Atom™ Built-in GPS WiFi, 3G, Gigabit Ethernet Wide range power supply ESF and EDC Ready F E ATURES Rugged and compact – The DynaCOR 10-00 is very powerful, yet compact mobile computer. With extended temperature range and rugged circular connectors, it is the ideal platform for harsh environments both in mobile and industrial applications. Certified to Perform – Designed to meet the transportation market requirements, the DynaCOR 10-00 is EN50155 compliant and supports features such as opto-isolation on I/O and transient and surge protection on the wide range power supply. Connected – With a wide choice of wireless and wired communication interfaces, it is simple to integrate this platform in any vehicle or industrial application. Low Power and Fanless – Designed with high efficiency in mind, the DynaCOR 10-00 delivers exceptional performance and low power consumption. M2M Ready – Ideally suited for Industrial & Rugged M2M applications to connect data with the business enterprise to make intelligent and actionable decisions. ESF & EDC Support – Available with Everyware Software Framework (ESF) to speed up application software development on the device. Also, enjoy the benefits of the Everyware Device Cloud (EDC) to dramatically cut Time-to-Market when building scalable, robust applications that integrate devices to business applications. The DynaCOR 10-00 is a rugged mobile computer platform that targets demanding vehicle and industrial installations such as those in heavy industry machinery, rail networks and rolling stock, buses, etc. Thanks to the very compact yet rugged design and integration, the system withstands the mechanical and temperature stresses encountered in harsh environmental conditions while providing an exceptional set of communication options needed in diverse use cases. The DynaCOR 10-00 provides the computational power of the Intel Atom CPU, the connectivity through Wi-Fi and 3G cellular networks, Dual Gigabit Ethernet, a high performance GPS and plenty of transportation specific features such as opto-isolated I/Os, serial ports, USBs and a wide range power supply section. Being low power, fanless, very compact and EN50155 certified, the DynaCOR 10-00 is off-the-shelf ready to be integrated in industrial, railway, automotive and similar applications. In addition, the device is IP65 protected and features high-end rugged connectors making the DynaCOR 10-00 easy to maintain and providing long-term reliability in harsh environments. The DynaCOR 10-00 can leverage Everyware Software Framework (ESF) for fast and reliable device application development and the Everyware Device Cloud (EDC) that provides the entire infrastructure to instantly integrate devices and data into the business enterprise. Connected, Rugged Mobile Computer DynaCO R 1 0 - 0 0 Specifications Mechanical Drawing GPS Antenna Wi-Fi Primary Antenna HSDPA/GPRS/GSM Antenna Bus Data Connector Wi-Fi Secondary Antenna Power Connector Bus Data Connector System Architecture CPU MODULE MASS STORAGE Eurotech Catalyst XL Intel Atom Z510P, 1.1GHz, 512MB RAM soldered on board 2 GB flash disk SSD soldered on board 1 Removable microSDHC card slot for data storage (Maintenance Interface) WIRELESS A1: GPS 50 channels Galileo ready, SMA connector A2: Wi-Fi 802.11 a/b/g/n Primary, SMA connector A3: Wi-Fi 802.11 a/b/g/n Secondary, SMA connector A4: HSUPA/HSDPA/UMTS/GPRS modem (data only), SMA connector INTERFACE M1: Power IN +24VDC (+, - and earth chassis) Key Input M2: 1 x USB 2.0 port (maintenance) 5 x Opto-isolated Digital Output 10 x Opto-isolated Digital Input 1 x Opto-isolated Digital Input Odometer Audio Ports: • 1x Stereo Microphone Input • 1x Stereo Headphones Output • 1x Speakers Output M3: 2 x Gigabit Ethernet ports 1x Opto-isolated RS232 serial port 1x Opto-isolated RS422/RS232/RS485 serial port, software configurable GROUND M4 Screw - System ground connection MAINTENANCE INTERFACE 1x serial interface RS232 2x USB 2.0 1x SIM Card Slot 1x microSDHC slot 4x LED 1x VGA output, 1x Reset pushbutton POWER SUPPLY 10.5 ÷ 36 VDC (Optionally 110 and 72 nominal VDC) REAL TIME CLOCK 24 hours at 25°C (typical) POWER CONSUMPTION 19 W OS SUPPORT Wind River Linux ESF READY Yes EDC READY Yes DIMENSIONS 254 x 129 x 57 mm (L x W x H) WEIGHT 1,5 Kg OPERATING TEMPERATURE -25°C ÷ 55°C EN50155 Class T1 (70°C for 10 min) STORAGE TEMPERATURE -30°C ÷ 80°C HUMIDITY 95% relative humidity at +45°C non condensing ENCLOUSURE Black ultra-light extruded aluminum alloy enclosure IP65 rating COOLING Fanless design (no moving parts) COMPLIANCE EN CE 50155 (Railway applications) EN 61373 (Vibrations & Shocks) EN 60950 (Safety) EN 61000 (Burst Immunity test) EN 60068 (Temperature test) Designed to meet: DIN-5510-2 (German Fire and Smoke) and ISO-11170 (Italian Fire and Smoke) Load Dump (for 24V In): ISO 7637-2 (2004-06) PERIPHERALS & ACCESSORIES Cable set with standard connectors for an easy peripherals and I/O connection Note: The information in this document is subject to change without notice and should not be construed as a commitment by EUROTECH. While reasonable precautions have been taken, EUROTECH assumes no responsibility for any error that may appear in this document. All trademarks or registered trademarks are the properties of their respective companies. ETH_DynaCOR 10-00_DS_02/2012 North America [email protected] Latin America [email protected] Europe, Middle East and Africa [email protected] Asia Pacific [email protected] For your local contact please refer to: www.eurotech.com/contacts Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Eurotech: DYCOR-10-00-00