LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0615FS Pb RoHS/RoHS II Compliant 6.0 x 6.0 x 2.0mm FEATURES: APPLICATIONS: • • • • • • DC/DC converter for LCD display of notebook PC • Portable communication equipment • Digital cameras Small size and low profile: 2.0mm Small DCR and high rated current High reliability to mechanical strength Magnetically shielded by magnetic powder molding Suitable for RoHS reflow profile ELECTRICAL SPECIFICATIONS: Abracon P/N: Operating Temperature & Humidity : Storage Temperature & Humidity: Part Number ASPI-0615FSInductance Code Units Symbol ASPI-0615FS-R50 ASPI-0615FS-R80 ASPI-0615FS-1R5 ASPI-0615FS-2R2 ASPI-0615FS-3R3 ASPI-0615FS-4R7 ASPI-0615FS-5R6 ASPI-0615FS-6R8 ASPI-0615FS-100 ASPI-0615FS-150 ASPI-0615FS-220 ASPI-0615FS-330 ASPI-0615FS-470 ASPI-0615FS Series -25˚C to +120˚C (Including self generated heat) -10˚C to +40˚C, 30% to 70% RH Inductance Inductance Tolerance DCR μH L 0.5 0.8 1.5 2.2 3.3 4.7 5.6 6.8 10 15 22 33 47 % M, N N N N N M, N M, N M, N M, N M, N M, N M, N M, N M, N mΩ DCR 9 12 17 24 30 43 55 60 90 120 170 310 370 DCR Tolerance Saturation Current Temperature Rise Current % A Isat 7.00 6.00 4.00 3.50 2.80 2.40 2.20 2.00 1.90 1.30 1.10 0.90 0.80 A Irms 5.20 4.10 3.60 2.90 2.80 2.20 2.00 1.80 1.50 1.20 1.00 0.90 0.80 ±30% ±20% Test Conditions 1. Inductance is measured in HP-4285A Precision LCR Meter. 2. RDC is measured in DU-5011 milli ohm meter.(or equivalent). 3. Isat : Based on inductance change (△L/Lo : ≤ -30%) 4. Irms : Based on temperature rise (△T : 40oC TYP. ) 5. Test Freq: 100KHz, 1Vrms OPTIONS AND PART IDENTIFICATION ASPI-0615FS- Inductance Code Please refer to Electrical Specification Table ABRACON IS ISO9001:2008 CE RTIFIED - Tolerance Code N: ±30% M: ±20%* Packaging T2: Tape and Reel (2kpcs / reel) *M for L = 3.3 ~ 47µH only Revised: 02.04.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0615FS Pb RoHS/RoHS II Compliant 6.0 x 6.0 x 2.0mm OUTLINE DRAWING: Mechanical Dimensions (Effective date: 2/15/2012) Please contact Abracon for products purchased before effective date. Package outline is different due to core material change. A B C D Typ. 6.0±0.2 6.0±0.2 2.0±0.2 1.50 3 1 2 4 Recommended Land Pattern Circuit Schematic No Polarity Dimension: mm Material No 1 2 3 4 ABRACON IS ISO9001:2008 CE RTIFIED Part Name Ferrite core Terminals Coil Adhesive Magnetic Powder Material Ni-Zn Ferrite Ag/Ni/Sn Cu/P180 Grd 1 Silicon Base Resin Ni-Zn Ferrite Revised: 02.04.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0615FS Pb RoHS/RoHS II Compliant 6.0 x 6.0 x 2.0mm TAPE & REEL: T2: 2,000pcs / reel Ao 6.35 Bo 6.20 Ko 2.40 W 16.00 P 12.00 T 0.40 A 330 B 21.0±0.8 C 13.5±0.5 G 16.6 N 99.5 T 21 Dimension: mm REFLOW PROFILE: ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 02.04.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com