FTP-628MCL101/103 battery drive, FTP-608 Series 2” high speed thermal printer FTP-628 MCL101/103, Easy Loading Method n Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer, printing on 2-inch wide paper (58mm) where platens are removable. Our original platen removal mechanism improved paper loading and maintenance. The FTP-608 MCL series can be used for a variety of applications, such as portable terminals, POS, ticket issuing terminals, label printers, banking terminals, and measurement and medical equipment. n HIGHLIGHTS • Easy loading type Our original platen removal mechanism improved paper loading and maintenance. • Ultra compact Height 15.5 mm, width 70.3 mm, depth 33.0 mm for the 2 inch model. • High speed printing It can print at 80 mm/s (640 dotlines/s) maximum by using Fujitsu's unique head drive control. • High resolution printing 8 dots/mm of resolution printing is possible. •RoHS compliant FTP-628MCL101/103 n Part numbers Item Part Numbe r Printer mechanism LSI for driving Interface Board Interface Cables Power cable FTP-628MCL101 (2-inch wide paper: 58mm) without platen open detect switch FTP-628MCL103 (2-inch wide paper: 58mm) with platen open detect switch FTP-628CU301 R (ANK only) FTP-628CU601R Parallel FTP-628DCL300R (Centronics) Serial FTP-628DSL305R (RS 232C) USB FTP-628DSL602R (V2.0) Parallel FTP-628Y20 2 Serial FTP-628Y30 2 USB FTP-629Y301 Head, motor, logic FTP-628Y402 n SPECIFICATIONS Specifications Item Part number FTP-628MCL101/103 Printing method Thermal-line dot method Dot structure 384 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch Effective printing area 48 mm Number of columns ANK 32 columns/line (maximum 12x 24 dot font) Paper width -1 58 mm+0 Paper thickness 60 to 100 µ m (some paper in this range may not be used because of paper characteristics Printing Speed Maximum 80mm/sec. (640 dot line/sec.) at 8.5V Character types Alphanumeric, katakana: 159 types International and special characters: 195 types JIS Kanji level 1, level 2, non-Kanji (supported only when Kanji CG is mounted): about 6800 types 12 × 24 dots, (1.5 × 3.0mm), 32 columns: ANK Character, dimensions (H×W), number of 24 × 24 dots, (3.0 × 3.0mm), 16 columns: ANK, Kanji columns 8 × 16 dots, (1.0 × 2.0 mm), 48 columns: ANK 16 × 16 dots, (2.0 × 2.0 mm), 24 columns: ANK, Kanji FTP-628MCL101/103 n SPECIFICATIONS Item Interface Operating Voltage Dimensions Weight Detection function FTP-628MCL101/103 Conforms to RS232C / Centronics For print head 4.2 VDC to 8.5 V, average current 0.87A (0.93),peak value Printing ratio: 12.5%, printing speed 50mm/sec. at 7.2 V For motor 4.2 VDC to 8.5 V, 1 A maximu m For logic 3.0 to 5.25VDC, 0.1 A maximum Printer mechanism 70.2 x 33.0 x 15.5 mm (WxDxH ) Interface board 69.3 x 52 x 15mm (WxDxH ) Printer mechanism Approximately 42 g Interface board Approximately 20 g Pulse resistance: 100 million pulses/dot (under our standard conditions). Abrasion resistance: paper traveling distance 50km (print ratio: 25% or less) Head life Operating environment Specification Operating temperature* 0˚ C to +50˚ C Operating humidity 20 to 85% RH (no condensation ) Storage temperature -20˚ C to +60˚ C (paper not included ) Storage humidity 5 to 90% RH (no condensation ) Head temperature detection Detected by thermistor Paper out/mark detection Detected by photo-interrupte r Recommended thermal sensitive paper High sensitive paper: TF50KS-E4 (Nippon Paper ) Standard paper: TK50KS-E (Nippon Paper) PD150R (Oji Paper) FTP-020P0701 (58mm) TK60KS-F1 (Nippon Paper) FTP-020P0102 (58mm) Medium life storage paper: PD170R (Oji Paper) AFP220VBB-1 (Mitsubishi Paper) Long life storage paper: PD160R-N (Oji Paper) AFP-235 (Mitsubishi Paper) TP50KJ-R (Nippon Paper) HA112AA (Nippon Paper) *+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability) FTP-628MCL101/103 n FUNCTION Item 1. Ite m 8. Mark detection functio n 2. Paper out detectio n 9. MCU operation abnormality detectio n 3. Paper near end detectio n 10 . Power ON/OFF sequence protectio n 4. Test print functio n Thermal head temperature abnormality detection 5. Blow-out fuse detectio n 11. Motor over-current protectio n 12 . Hardware time r 6. Head voltage abnormality detectio n 7. Motor power saving functio n n dimensions 1. Printer mechanism: 2- inch FTP-628MCL103 FTP-628MCL101 center of paper center of paper 58.0 58.0 24(paper end sensor) 24(paper and sensor) 0.7 0.7 4.6 62.2 64.7 65.6±0. Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified). 2. Dimension listed in ( ) is for reference (54) 3. 33 8.9 (4.) (4.) FUJITSU FUJITSU 3. JAPAN JAPAN 33 8.9 F.T F.T 4.6 5.5 5.5 62.2 64.7 65.6±0. 66.7 Unit: mm FTP-628MCL101/103 n Printer connector (flexible PT board) pin arrays FTP-628 MCL101/103 Thermal head, control circuit side connector: 52610-3071Molex or equivalent product No Signa l I/ O Content s 1 PH K — Cathode for photo interruptor 2 VSE N I paper sensor power 3 PH E O Emittor for photo interruptor 4 N.C. (101)/ SW1 (103 ) —/ I Platen release switch 5 N.C. (101)/ SW2 (103 ) —/ I Platen release switch 6 VH | 7 VH | 8 DI I Data in 9 CL K I Synchronous clock for communication 10 GN D — 11 GN D — 12 STB 6 I 13 STB 5 I 14 STB 4 I 15 VD D I Logic power 16 TH O Thermally sensitive resistor input termnial 1 17 TH O Thermally sensitive resistor input termnial 2 18 STB 3 I 19 STB 2 I 20 STB 1 I 21 GN D — 22 GN D — 23 LA T I 24 DO O 25 VH I 26 VH I 27 MT A I 28 MT A I 29 MT B I 30 MT B I Head drive power Ground power supply for thermal head Thermal head energizing control signal Thermal head energizing control signal Ground power supply for thermal head Data latch Data out Power supply for thermal head Stepping motor excitation signal Do not plug or unplug the FPC when power is on. FTP-628MCL101/103 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141 8630, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. February 26, 2009. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fujitsu: FTP-628MCL103