BTCPower TM Broadband TelCom Power, Inc. HBO or HBP CPH Series Redefining “Current” Limits In Power Conversion Up to 350W/100A Half Bricks Description The HBO (open-frame) or HBP (enclosure-frame) CPH series of low cost DC/DC converters offer the different current levels and are comparable to existing half-bricks. With a wide input voltage range of 18-24V or 36-75V they are available with an output voltage of either 1.5, 1.8, 2.5, 3.3, or 5 Volts. All models feature an input filter, output overvoltage and overtemperature protection, output current limiting and short circuit protection. The HBO series openframe construction with base-plate and HBP series enclosure frame achieve efficient heat transfer with no hot spots. The use of patented Flat Transformer technology and other patent-pending design concepts facilitate maximum power delivered. The converters combine creative design concepts with highly derated power devices to achieve very high reliability, high performance and offer a low cost solution to systems designers that are challenged to maximize power and minimize board space. Features • • • • • • • • Delivers up to 350W / 100A in Half Brick High efficiency patented topology Low profile of only 0.36 inch 1.5V, 1.8V, 2.5V, 3.3V, or 5V output modules 100V/100ms (50V/100ms for 24V model) Input transient capability -40°C to +100 °C ambient operation Meets Basic Insulation requirements of EN60950 UL 1950 recognized, CAN / CSA C22.2 No. 950-95 Certified, and TUV EN60950 ( pending ) • Meets conducted limits of FCC Class B and CEI IEC61204-3 Class B with external filter Specification Summary • 100A @ 1.5V, 100A @ 1.8V, 80A @ 2.5V, 70A @ 3.3V, 70A @ 5.0V, • Tight output regulation, typical ±2% • No minimum load required • Ripple & Noise (20Mhz BW) 100 mV (pk-pk) or 2% (pk-pk) • Wide input operating range 18-36V or 36-75V • On/Off pin and remote sense • Output adjustment +/-10% range • 1500V, 10M Applications • • • • • • • Telecommunications Data Communications Wireless Communications Networking Gear Servers, Switches and Data Storage Semiconductor Test Equipment Distributed Power Architecture input-to-output isolation • Frame construction with heat spreader for low temperature rise • Output overcurrent and overvoltage protection • Over Temperature protection • Input Under voltage protection • MTBF of 1,600,000 hours @ 50°C ( Bellcore ) Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840 • www.btcpower.com • Email: [email protected] PB HBO/HBP CPH Rev1 4-7-03 HBO or HBP CPH Series BTCPower Up to 350W/100A Half Bricks TM Product Brief Part Number and Selection Information Model Input Part Number Positive Logic Negative Logic Voltage (Volts) Output Current (A) Efficiency Voltage Current 75% Load Nominal Range No load Full load (Volts) (Amps) (%) HBO100A-24-1.5P HBO100A-24-1.5N HBO100A-24-1.8P HBO100A-24-1.8N 24 24 18-36 18-36 0.1 0.1 7.5 8.9 1.5 1.8 100 100 83 84 HBO80A-24-2.5P HBO70A-24-3.3P HBO70A-24-5P HBO100A-48-1.5P HBO100A-48-1.8P HBO80A-48-2.5P HBO70A-48-3.3P HBO70A-48-5P 24 24 24 48 48 48 48 48 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 9.5 10.9 16.3 3.7 4.4 4.7 5.4 8.1 2.5 3.3 5.0 1.5 1.8 2.5 3.3 5.0 80 70 70 100 100 80 70 70 87 88 89 84 85 88 89 90 HBO80A-24-2.5N HBO70A-24-3.3N HBO70A-24-5N HBO100A-48-1.5N HBO100A-48-1.8N HBO80A-48-2.5N HBO70A-48-3.3N HBO70A-48-5N Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted. For encapsulated (epoxy enclosed) models, replace “HBO” in part no. with “HBP”. Outline Information and Pin-out Pin Connection Pin# Function 1 2 Vin + On/Off 3 Case 4 Vin - 5 6 7 8 9 Vout Sense Trim Sense + Vout + All dimensions are in inches [mm] Pin 5 and 9 are dia. 0.08 [2.03] All other pins are all dia. 0.040 [1.02] Pin material: Brass Pin finish: Tin/Lead plated Heat spreader (baseplate) material: Aluminum Weight: 50.5g The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Worldwide Headquarter: Broadband TelCom Power, Inc. 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 Fax: 714-259-0840 Email: [email protected] www.btcpower.com European Headquarter: Broadband TelCom Power Europe B. V. Dukaatstraat 14, 4879AD Etten-Leur, The Netherlands Tel.: 31-76-5038350 Fax: 31-76-5012038 Email: [email protected] PB HBO/HBP CPH Rev1 4-7-03