To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. HD74HC175 Quad. D-type Flip-Flops (with Clear) REJ03D0585-0300 Rev.3.00 Jan 31, 2006 Description Information at the D inputs of the HD74HC175 is transferred to the Q and Q outputs on the positive going edge of the clock pulse. Both true and compliment outputs from each flip-flop are externally available. All four flip-flops are controlled by a common clock and a common clear. Clearing is accomplished by a negative pulse at the clear input. All four Q outputs are cleared to a logic low level and all four Q outputs to a logic high level. Features • • • • • • High Speed Operation: tpd (Clock to Q) = 14 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) Ordering Information Part Name Package Type Package Code (Previous Code) Package Abbreviation Taping Abbreviation (Quantity) PRDP0016AE-B P (DP-16FV) PTSP0016JB-A HD74HC175TELL TSSOP-16 pin T (TTP-16DAV) Note: Please consult the sales office for the above package availability. HD74HC175P DILP-16 pin — ELL (2,000 pcs/reel) Function Table H: L: X: Clear L H H H High level Low level Irrelevant Inputs Clock X L Rev.3.00, Jan 31, 2006 page 1 of 6 Output D X H L X Q H L H Q L H L no change HD74HC175 Pin Arrangement 16 VCC Clear 1 1Q 2 1Q 3 Q CLR CK Q D CLR Q CK Q D 15 4Q 14 4Q 1D 4 13 4D 2D 5 12 3D 2Q 6 2Q 7 D Q CK CLR Q D CK Q CLR Q 11 3Q 10 3Q 9 Clock GND 8 (Top view) Logic Diagram 1D Q 1Q CK CL 1Q D CK Clock 2D Q 2Q CK CL 2Q D CK 3D Q 3Q CK CL 3Q D CK 4D Q 4Q CK CL 4Q D CK Clear Rev.3.00, Jan 31, 2006 page 2 of 6 HD74HC175 Absolute Maximum Ratings Item Supply voltage range Input / Output voltage Input / Output diode current Output current VCC, GND current Power dissipation Storage temperature Symbol VCC Vin, Vout IIK, IOK IO ICC or IGND PT Tstg Ratings –0.5 to 7.0 –0.5 to VCC +0.5 ±20 ±25 ±50 500 –65 to +150 Unit V V mA mA mA mW °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Supply voltage Input / Output voltage Operating temperature Symbol VCC VIN, VOUT Ta Input rise / fall time*1 Ratings 2 to 6 0 to VCC –40 to 85 0 to 1000 0 to 500 tr, tf Unit V V °C ns 0 to 400 Note: Conditions VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Electrical Characteristics Item Input voltage Symbol VCC (V) VIH VIL Output voltage VOH VOL Input current Quiescent supply current Iin ICC 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 Rev.3.00, Jan 31, 2006 page 3 of 6 Min 1.5 3.15 4.2 — — — 1.9 4.4 5.9 4.18 5.68 — — — — — — — Ta = 25°C Typ Max — — — — — — 2.0 4.5 6.0 — — 0.0 0.0 0.0 — — — — — — — 0.5 1.35 1.8 — — — — — 0.1 0.1 0.1 0.26 0.26 ±0.1 4.0 Ta = –40 to+85°C Unit Min Max 1.5 3.15 4.2 — — — 1.9 4.4 5.9 4.13 5.63 — — — — — — — — — — 0.5 1.35 1.8 — — — — — 0.1 0.1 0.1 0.33 0.33 ±1.0 40 Test Conditions V V V V Vin = VIH or VIL IOH = –20 µA Vin = VIH or VIL IOH = –4 mA IOH = –5.2 mA IOL = 20 µA IOL = 4 mA IOL = 5.2 mA µA Vin = VCC or GND µA Vin = VCC or GND, Iout = 0 µA HD74HC175 Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Item Maximum clock frequency Propagation delay time Symbol VCC (V) fmax tPLH, tPHL Setup time tsu Hold time th Removal time Pulse width Output rise/fall time Input capacitance trem tw tTLH, tTHL Cin 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 — Ta = 25°C Ta = –40 to +85°C Unit Min Typ Max Min Max — — — — — — — — — 100 20 17 5 5 5 100 20 17 80 16 14 — — — — — — — — 14 — — 14 — — 3 – — –1 — — –1 — — 9 — — 5 — 5 6 30 35 150 30 26 185 37 31 — — — — — — — — — — — — 75 15 13 10 — — — — — — — — — 125 25 21 5 5 5 125 25 21 100 20 17 — — — — 5 24 28 190 38 33 230 46 39 — — — — — — — — — — — — 95 19 16 10 ns Clock to Q or Q ns Clear to Q or Q ns Data to Clock ns Clock to Data ns Clear to Clock ns Clock, Clear ns pF Test Circuit Measurement point CL* Note: CL includes the probe and fig capacitance. Rev.3.00, Jan 31, 2006 page 4 of 6 Test Conditions MHz HD74HC175 Waveforms • Waveform – 1 tr tf Data VCC 90 % 90 % 50 % 50 % 50 % 10 % 10 % t su tr th t su 0V th tf VCC 90 % Clock 50 % 50 % 50 % 10 % 10 % tw 0V tw t PHL t PLH Q VOH 90 % 50 % 10 % 90 % 50 % 10 % t TLH VOL t THL t PHL t PLH VOH 90 % Q 50 % 10 % 50 % 10 % t TLH t THL • Waveform – 2 Clear VOL tf tr VCC 90 % 50 % 10 % 90 % 50 % 10 % 0V tw tf tr Clock t rem tw t PHL 90 % 10 % VOL t TLH t PHL t PLH 90 % VOH 90 % 50 % 10 % t TLH Note : Clock Input : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns Data Input : PRR ≤ 500 kHz Rev.3.00, Jan 31, 2006 page 5 of 6 VOH 50 % t THL Q 0V t PLH 90 % 50 % 10 % Q VCC 90 % 50 % 10 % 90 % 50 % 10 % 50 % 10 % t THL VOL HD74HC175 Package Dimensions JEITA Package Code P-DIP16-6.3x19.2-2.54 RENESAS Code PRDP0016AE-B MASS[Typ.] 1.05g Previous Code DP-16FV D 9 E 16 1 8 b3 0.89 Z A1 A Reference Symbol L e Nom θ c e1 D 19.2 E 6.3 JEITA Package Code P-TSSOP16-4.4x5-0.65 RENESAS Code PTSP0016JB-A *1 Previous Code TTP-16DAV 7.4 A1 0.51 b p 0.40 b 3 0.48 0.56 1.30 c 0.19 θ 0° e 2.29 0.25 0.31 2.54 2.79 15° 1.12 L 2.54 MASS[Typ.] 0.05g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. D F 16 20.32 5.06 Z ( Ni/Pd/Au plating ) Max 7.62 1 A bp e Dimension in Millimeters Min 9 *2 E HE c bp Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) Index mark Dimension in Millimeters Min Nom Max D 5.0 5.3 E 4.40 A2 A1 Z e *3 bp L1 0.07 0.10 0.15 0.20 0.25 0.10 0.15 0.20 6.40 6.60 1.10 x bp M b1 c A c A1 θ L y Detail F 1 θ 0° HE 6.20 8° 0.65 e x 0.13 y 0.10 0.65 Z 0.4 L L Rev.3.00, Jan 31, 2006 page 6 of 6 0.03 A 8 1 1 0.5 1.0 0.6 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .6.0