JDS OLA-54 A smart, future-proof optical level attenuator Datasheet

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
OLA-54/55 SMART Optical Level Attenuator
A SMART, Future-Proof Optical Level Attenuator
Key features
••50/125 µm multimode fiber design (OLA-54)
• Ready for 40 Gb/s systems (OLA-55)
• New optical design allowing for low minimum insertion
loss
• SmartWheel for precise and fast manual setting
• Absolute and relative attenuation setting
• FTTx ready
JDSU’s SMART optical handhelds go beyond the basics
With more than 70,000 optical handhelds already in use, JDSU continues the success
story with the Smart optical handhelds. The Smart class help your network move to the
next level of performance. JDSU’s Smart optical handhelds encompass a new, intelligent,
and next level product line for testing all optical signals and systems, including broadband, PONs, and Gigabit Ethernet.
All of JDSU’s Smart optical handhelds provide:
•An extended number of calibration wavelengths for the highest performance range in the
industry.
• The SMARTStar graphical user interface for fast, easy, and straightforward operation.
• The SMARTEnergy power supply management system.•
• The SMARTBag for safe and hands-free operation and transport
• Traceable measurements to international standards for confidence in accuracy.
• A robust, shock-proof, and splash-proof design for field operation
• Quick start operation, requiring no warm-up time and reducing testing time.
The OLA-54 Smart Optical Level Attenuator is designed for multimode fiber systems
(50/125 µm fiber).
The OLA-55 Smart Optical Level Attenuator is a future-proof instrument for system
testing, installation, maintenance, and production of singlemode fibers. Due to minimized differential group delay (DGD), the OLA-55 is also suitable for 40 Gb/s systems.
WEBSITE: www.jdsu.com
OLA-54/55 Smart Optical Level Attenuator
2
Dust cap for the optical interface
OCK-10 Optical Connector Cleaning Kit (accessory)
Shock-proof design
Display (128 x 64 dots) shows
up to three results simultaneously
OVF-1 Visual Fault Locator (accessory)
Backlight for the display
SMART wheel for precise and
fast manual setting
Optical adapters (BN 2150) for laser source output
Power-on, auto power-off
(after 20 min)
Worldwide compatible AC adapter (SNT-121A)
OLA-54/55 Smart Optical Level Attenuator
3
Specifications
OLA-54
BN 2280/41 Multimode
Adjustable wavelength range
750 to 1350 nm in 1 nm increments
OLA-55
BN 2280/01 Singlemode
BN 2280/21 Singlemode APC
1260 to 1650 nm in 1nm increments
Fiber type
Calibrated wavelengths
Display range(1)
Minimum insertion loss(1)
Linearity
Repeatability of attenuation setting(2)
50/125 µm
850 nm, 1300 nm
<2.5 to 55 dB
<2.5 dB
± 0.2
± 0.1 dB
9/125 µm
1310 nm, 1550 nm, 1625 nm
2.0 to 60 dB
<2.0 dB
± 0.2
± 0.1 dB
Total attenuation accuracy(1)
Setting type
Function
Displayed value(1)
Max. permitted level
typ. ± 0.8 dB
Continuous over the entire range
Bi-directional
Absolute or relative attenuation value
+20 dBm
± 0.8 dB
Continuous over the entire range
Bi-directional
Absolute or relative attenuation value
+23 dBm
(1) Including connectors (to IEC874-1, method 6), depending on quality of the connectors applied to the OLA
(2) Excluding remating
General data
Display
Illuminated graphical display, resolution of 128 × 64 dots
Results displayed in
Backlight function switchable via a separate key
dB
Connector
Optical connector interchangeable adapter from BN 2150/00.xx range is suitable for
measurements on flat or angled physical contact systems
Power supply
Four dry batteries Mignon/AA, 1.5 V or NiMH rechargeable cells Mignon/AA, 1.2 V
Operating time from dry batteries
>300 h
Batteries/NiCd/NiMH power saving: The instrument switches off automatically after
~20 min (function can be disabled)
AC line operation via separate AC adapter
Integrated fast battery charging function (2 hours)
External 12 V DC operating via an AC adapter or a 12 V car battery adapter
Electromagnetic compatibility
Corresponds to IEC 61326 (CE conformance)
Calibration
Suggested calibration interval
Ambient temperature
Nominal range of use
Storage and transport
Dimensions and Weight
B × H × T approximately
Weight approximately
3 years
−10°C to +55°C
−40°C to +70°C
95 × 60 × 195 mm (3.74 × 2.36 × 7.68 in)
500 g (1.1 lb)
OLA-54/55 Smart Optical Level Attenuator
Ordering information
Ordering number
Instrument
BN 2280/01
OLA-55 Singlemode, variable attenuator, PC
BN 2280/21
OLA-55 Singlemode, variable attenuator, APC
BN 2280/41
OLA-54 Multimode, variable attenuator, 50/125 µm
Included with the OLA-55
2 × Interchangeable adapter from
Four dry batteries Mignon/AA, 1.5 V
BN 2150/00.xx (range (must be selected)
Operating manual
MT-1S Belt bag
Ordering number
Accessories
BN 2150/00.32
Optical adapter ST type
BN 2150/00.58
Optical adapter SC type
BN 2150/00.51
Optical adapter FC type
BN 2150/00.50
Optical adapter DIN type
BN 2150/00.59
Optical adapter LC type
BN 2252/01
OVF-1 Visual Fault Locator
BN 2229/90.21
OCK-10 Optical Connector Cleaning Kit
BN 2229/90.07
Optical cleaning tape
BN 2229/90.08
Spare tape for optical cleaning tape
BN 2237/90.02
NiMH cells, Mignon/AA, 1.2 V (4 required per instrument)
BN 2277/90.01
SNT-121A Worldwide compatible AC adapter
K804
USB connection cable
BN 2277/90.02
MT-1S belt bag for one instrument
BN 2126/03
MT-2S soft bag for two instruments
BN 2126/04
MT-3S soft bag for three instruments
BN 2093/31
MK-3S hard case for three instruments
BN 2280/90.01
Calibration Report
Detailed information regarding test adapters, cables, and fiber optic sleeves can be found
in a separate datasheet entitled “JDSU Fiber Optic Test Adapters and Cables”.
Test & Measurement Regional Sales
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and
no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its applications. JDSU reserves the right to change at any time without notice
the design, specifications, function, fit or form of its products described herein, including withdrawal at any
time of a product offered for sale herein. JDSU makes no representations that the products herein are free from
any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo
are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders.
© 2007 JDS Uniphase Corporation. All rights reserved. 30137101 501 1207 SMART-OLA55.DS.FOP.TM.AE
NORTH AMERICA
LATIN AMERICA
ASIA PACIFIC
TEL: 1 866 228 3762
FAX: +1 301 353 9216
TEL:+55 11 5503 3800
FAX:+55 11 5505 1598
TEL:+852 2892 0990
FAX:+852 2892 0770
EMEA
TEL:+49 7121 86 2222
FAX:+49 7121 86 1222
WEBSITE: www.jdsu.com
Similar pages