Medical PSU FSP180-AHAM1 DESCRIPTION This series of AC /DC switching power supplies are for 180 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an inlet of the IEC 320/C 14 or IEC 320/C 8 to mate with interchangeable cord for world-wide use. All models meet EN 55011 and FC C class B emission limits, and are designed for medical applications not for life-supporting equipment. FEATURES High efficiency Low ripple & noise Over voltage protection Short-circuit protection Overpower protection Over temperature protection 100% burn-in at full rated load Standby consumption less than 0.5 W C ompliant with C EC and ENERGY STAR efficiency level V requirements C ompliant with RoHS requirements W ATTAGE Wattage: 180W DIMENSION Dimension: SAFETY STANDARD APPAOVAL OUTPUT SPECIFICATION Ripple & Noise: Over Current Protection: ENVIRONMENTAL SPECIFICATION 197.0mm(L) x 88.0mm(W) x 44.0mm(H) TEMP.Range: INPUT SPECIFICATION Input Range: Input Frequency: Input Current: Leakage Current: Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change All models protected to shortcircuit conditions 90-264 Vdc 50-60 Hz 2.4A(rms) for115VAC , 1.2A(rms) for230VAC 200 µA max. @ 264 VAC ,63 Hz Operating Temperature:0°C to +40°C Storage Temperature: -20°C to + 80℃ OUTPUT ELECTRICAL Single Output: 12 V/ 15 A NOTES 1. C lass I models are equipped with IEC 320/C 14 inlet, and class II models with IEC 320/C 8 inlet. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 47 μF electrolytic capacitor in parallel with a 0.1 μF ceramic capacitor across the output. This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice