FH1 thru FH7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 1A Features • • • • • • • • Glass passivated High Efficiency Rectifiers Very low profile - typical height of 1.0 mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGA (SOD-123FL) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Symbol FH1 FH2 FH3 FH4 FH5 FH6 FH7 Unit VRRM VRMS VDC IF(AV) 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 1.0 600 800 1000 V Electrical Characteristics Parameter Test Conditions Maximum instantaneous forward voltage 1A Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=125℃ Maximum reverse recovery time Typical thermal resistance 1) IF=0.5A,IR=1.0A, 30 A - 55 to + 150 °C IFSM Operating junction and storage temperature range TJ, TSTG A (TA = 25 °C unless otherwise noted) Symbol VF FH1 FH2 FH3 FH4 1.3 FH5 FH6 FH7 1.7 Volts 5 IR µA 100 trr 50 Unit 75 nS Irr=0.25A juntion to ambient RθJA 66 juntion to case RθJC 28 juntion to mount RθJM 1 ℃/W Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2014.01-Rev.A FH1 thru FH7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 1A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 Figure 4. Typical Reverse Characteristics 2014.01-Rev.A FH1 thru FH7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 1A Package Outline Dimensions DIM A Unit: mm Unit: inch MIN MAX MIN MAX 0.9 1.08 0.035 0.043 A1 0 0.1 0.000 0.004 B 0.85 1.05 0.033 0.041 C 0.1 0.25 0.004 0.010 D 1.7 2 0.067 0.079 E 2.9 3.1 0.114 0.122 L 0.43 0.83 0.017 0.033 HE 3.5 3.9 0.138 0.154 Soldering footprint Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2014.01-Rev.A FH1 thru FH7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou GoodArk Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.01-Rev.A