PPTC/K60 Series Features Applications Radial leaded Devices Almost anywhere there is a low voltage Cured,flame retardant epoxy polymer power supply, up to DC30V and a load insulating material meets UL94V-0 to be protested, including: requirements Automotive electronics Bulk packaging,or tape and reel Medical products available on most models Industrial controls Product dimensions (mm) Model Fig A(max) B(max) C(max) D(typ) K60-005 1(2) 5.0 8.5 3 5.1 K60-010 1(2) 5.5 9.5 3 5.1 K60-017 1(2) 7.4 12.7 3 5.1 K60-020 1(2) 7.4 12.7 3 5.1 K60-025 1(2) 1 7.4 12.7 3 5.1 K60-030 K60-040 1 1(2) 2 7.4 13.0 3 5.1 7.8 16.2 3 5.1 K60-050 2 7.8 16.2 3 5.1 K60-065 2 9.7 17.8 3 5.1 K60-075 2 10.4 18.4 3 5.1 K60-090 2 11.7 18.4 3 5.1 K60-110Y 1 13.0 18.0 3 5.1 5.1 K60-110F 3 13.0 18.0 3 K60-135 1 14.5 19.6 3 5.1 K60-160 1 16.3 21.3 3 5.1 K60-185 1 17.8 22.9 3 5.1 K60-200 1 17.8 22.9 3 5.1 10.2 K60-250 1 21.3 26.4 3 K60-300 1 21.3 26.4 3 10.2 K60-375 1 28.5 33.5 3 10.2 K60-500 1 28.5 33.5 3 10.2 Physical Characteristcs Material:Leads K60-005～030 Tin plated copper,22AWG0.60mm or Tin-plated nickel-copper alloy,24AWG0.50mm K60-040～090 Tin plated copper,22AWG,0.60mm K60-300～500 Tin plated copper,20AWG,0.80mm Environmental Specifications Test conditions Resistance change ±8% typical Passive aging ＋85℃,100hts Humidity aging ＋85℃,85%R.H.,100hrs ±8% typical Thermal shock ＋125℃,to-55℃,10times ±12% typical Resistance to solvent Vibration Storage conditions:-40℃ to 85℃ REV.2014.05.01 MIL-STD-202,Method 215 No change MIL-STD-202,Method 201 No change 01 | www.spsemi.cn PPTC/K60 Series Electrical characteristics(25℃ ) Part number K60-005 K60-010 K60-017 K60-020 K60-025 K60-030 K60-040 K60-050 K60-065 K60-075 K60-090 K60-110Y K60-110F K60-135 K60-160 K60-185 K60-200 K60-250 K60-300 K60-375 K60-500 Ihold Itrip Vmax Imax Pd max (A) 0.05 0.10 0.17 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 1.10 1.10 1.35 1.60 1.85 2.00 2.50 3.00 3.75 5.00 (A) 0.10 0.20 0.34 0.40 0.50 0.60 0.80 1.00 1.30 1.50 1.80 2.20 2.20 2.70 3.20 3.70 4.00 5.00 6.00 7.50 10.00 (Vdc) 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 (A) 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 (w) 0.30 0.38 0.48 0.41 0.45 0.49 0.56 0.77 0.88 0.92 0.99 0.15 0.15 0.12 0.09 0.08 0.07 0.05 0.04 0.03 0.02 Maximum Time To Trip Current Time (A) (S) 0.25 5 0.50 5 0.85 5 1.00 5 1.25 5 1.50 5 2.00 5 2.50 5 3.25 5 3.75 5 4.50 5 5.50 8 5.50 8 6.75 8 8.00 8 9.25 8 10.00 8 12.50 8 15.00 8 24 18.75 25.00 24 Rmin (Ω) 7.30 2.50 2.00 1.50 1.00 0.76 0.55 0.50 0.31 0.25 0.20 0.15 0.15 0.12 0.09 0.08 0.07 0.05 0.04 0.03 0.02 Ihold Hold Current:Maximum current device will not trip in 25℃ still air. Itrip Trip current:Minimum current at which the device will always trip in 25℃ still air Vmax Maximum operating volatge device can withstand without damage at ratde current(imax). Imax Maximum fault current device can withstand without damage at rated voltage(Vmax). Typical power dissipatde from device when in the tripped state in 25℃ still air. Pd Resistance Rmax (Ω ) 20.00 7.50 5.21 2.84 1.95 1.38 0.88 0.79 0.50 0.42 0.33 0.27 0.27 0.21 0.16 0.14 0.14 0.10 0.08 0.06 0.06 R1max (Ω) 30.00 12.00 8.00 4.49 3.00 2.20 1.40 1.20 0.74 0.62 0.49 0.40 0.40 0.32 0.24 0.21 0.21 0.15 0.12 0.10 0.10 70 0.032 0.05 0.09 0.10 0.12 0.14 0.20 0.25 0.33 0.39 0.47 0.55 0.55 0.68 0.80 0.92 1.08 1.30 1.50 1.95 2.70 80 0.025 0.03 0.06 0.07 0.09 0.10 0.14 0.18 0.24 0.28 0.33 0.40 0.40 0.50 0.60 0.67 0.80 0.90 1.09 1.39 2.00 Rmin/max Minimum/Maximum device resistance prior to tripping at 25℃. Maximum resistance of device at 25℃ measured one hour after trippde tripping. R1max *CAUTION Operation beyond the specified rating may result in damage and possible arcing. Thermal Derating Chart-IH(A) Part number K60-005 K60-010 K60-017 K60-020 K60-025 K60-030 K60-040 K60-050 K60-065 K60-075 K60-090 K60-110Y K60-110F K60-135 K60-160 K60-185 K60-200 K60-250 K60-300 K60-375 K60-500 REV.2014.05.01 -40 0.077 0.18 0.28 0.34 0.42 0.52 0.66 0.83 1.10 1.26 1.52 1.82 1.82 2.20 2.60 3.00 3.21 4.05 4.82 6.02 8.00 -20 0.069 0.15 0.24 0.29 0.36 0.44 0.57 0.74 0.95 1.11 1.30 1.60 1.60 1.91 2.30 2.63 2.72 3.58 4.16 5.19 6.80 Maximum ambidnt operating temperatures(℃) 0 25 40 50 60 0.061 0.050 0.044 0.040 0.036 0.13 0.10 0.08 0.07 0.06 0.20 0.17 0.14 0.12 0.10 0.25 0.20 0.16 0.14 0.13 0.31 0.25 0.20 0.18 0.16 0.38 0.30 0.24 0.22 0.18 0.50 0.40 0.32 0.29 0.24 0.63 0.50 0.41 0.36 0.30 0.82 0.65 0.53 0.47 0.40 0.95 0.75 0.61 0.54 0.45 1.15 0.90 0.73 0.65 0.55 1.35 1.10 0.90 0.79 0.65 1.35 1.10 0.90 0.79 0.65 1.65 1.35 1.09 0.96 0.80 1.95 1.60 1.30 1.13 1.00 2.30 1.85 1.50 1.33 1.12 2.38 2.00 1.62 1.44 1.26 3.02 2.50 2.02 1.80 1.55 3.62 3.00 2.43 2.16 1.85 4.50 3.75 3.02 2.68 2.30 5.95 5.00 4.05 3.60 3.15 02 | www.spsemi.cn PPTC/K60 Series Typical Time-To-Trip Curve At 25°C Thermal Derating Curve Average Time Current Curves Derating Curves for K60 Series 0.100A 0.170A 1000 180 0.200A 0.300A TIME IN SECOND 100 0.400A 0.500A 0.650A 10 0.750A 0.900A 1.10A 1 1.35A 1.60A 1.85A 0.1 2.50A 3.00A 3.75A 0.01 0.1 1 10 Percentage of Derated Current 0.250A 160 140 120 100 80 60 40 20 0 -40 100 CURRENT IN AMPERES -20 0 20 40 60 80 Temperature (°C) Package Information Bulk: K60-005～110Y 1000pcs per bag K60-110F～300 500pcs per bag k60-375～500 200pcs per bag REV.2014.05.01 03 | www.spsemi.cn