F1772-4200 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 440 V (MKT) FEATURES: Dimensions in mm Product is completely lead (Pb)-free Product is RoHS compliant W L Pb-free CAPACITANCE TOLERANCE: e3 Standard: ± 20 % H RoHS DISSIPATION FACTOR TANδ: COMPLIANT < 1 % measured at 1 kHz ± 0.4 pcm ± 0.4 X Ø 0.8 INSULATION RESISTANCE: FOR C ≤ 0.33 µF: 30 GΩ average value 15 GΩ minimum value TIME CONSTANT FOR C > 0.33 µF: LEAD LENGTH X (mm) 4-1 6-1 15-1 30+5 ORDERING CODE** F1772-. . .-4204/4264 F1772-. . .-4200/4260 F1772-. . .-4215/4265 F1772-. . .-4230/4263 Electrode Free margin Dielectric Center margin MAXIMUM PULSE RISE TIME: (du/dt) in V/µs 10 000 sec. average value 5000 sec. minimum value TEST VOLTAGE: (Electrode/electrode): DC 2150 V/2 sec. REFERENCE STANDARDS: EN 132 400, 1994 EN 60068-1 IEC 60384-14/2, 1993 UL 1283 UL 1414 CSA 22.2 No. 8-M 86 CSA 22.2 No. 1-M 90 DIELECTRIC: Polyester film RATED VOLTAGE PITCH (mm) 15.0 22.5 27.5 37.5 ELECTRODES: AC 440 V 200 150 100 100 Metal evaporated RATED VOLTAGE: CONSTRUCTION: AC 440 V, 50/60 Hz Metallized film capacitor Internal series connection PERMISSIBLE DC VOLTAGE: Between interconnected terminations and case (foil method): AC 2500 V for 2 sec. at 25 °C. DC 1000 V TERMINALS: Z [Ω] 0 E6 series 0.01 µFX2 - 1.0 µFX2 E12 values on request 2.2 μF 1.5 μF 1 μF 0.68 μF CAPACITANCE RANGE: -2 10 0.1 μF 0.068 μF 0.47 μF -1 0.15 μF 10 0.33 μF 40/100/56 0.22 μF CLIMATIC TESTING CLASS ACC.TO EN 60068-1: 0.022 μF 10 0.047 μF Plastic case, epoxy resin sealed, flame retardant UL 94V-0 1 0.015 μF 0.01 μF COATING: 10 0.033 μF Radial tinned copper wire -3 10 FURTHER TECHNICAL DATA: 0.01 See page 21 (Document No 26504) 0.05 0.1 0.5 1.0 5.0 10 50 100 f [MHz] Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 6 mm. Document Number: 26500 Revision: 11-Jun-07 To contact us: [email protected] www.vishay.com 25 F1772-4200 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 440 V (MKT) APPROVALS COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL REFERENCE U.S.A. (for AC 250 V) UL 1283 UL 1414 0.01 - 1.0 µFX 0.01 - 1.0 µFX E 76297 E 100682 Canada (for AC 250 V) C 22.2 No. 8-M 1986 C 22.2 No. 1-M 1994 0.01 - 1.0 µFX 0.01 - 0.82 µFX LR 64546 LR 64546-8 0.01 - 1.0 µFX2 DE 1-8221 0.01 - 1.0 µFX2 40005095 CB TEST-CERTIFICATE (for AC 440 V) EN 132 400; 1999 IEC 60384-14, 2nd edition, 1995 Germany APPROVAL MARK 10 This approval mark together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the CB-Agreement): Austria Belgium Denmark Finland Sweden France Germany Ireland Italy Switzerland Netherlands Japan Singapore CAPACITANCE TOL. (%) Israel Portugal Spain Great Britain Norway China Poland Czech. Republic Rep. of Korea Hungary Iceland Slovenia PITCH (mm) BOX NO. DIMENSIONS W x H x L (mm) (+ 0.2/- 0.4 mm) WEIGHT LEAD LENGTH 6-1 mm (g) QUANTITY PACKAGE LEAD LENGTH < = 6-1 mm (pcs)* 750 600 450 325 260 300 235 225 200 185 160 170 125 125 110 110 90 85 70 80 60 70 0.01 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 0.015 µFX2 ± 20 15.0 49 6.0 x 12.0 x 17.9 2.0 0.022 µFX2 ± 20 15.0 07 7.3 x 13.3 x 17.8 2.0 0.033 µFX2 ± 20 15.0 08 8.3 x 14.3 x 17.8 2.7 0.047 µFX2 ± 20 22.5 09 6.3 x 14.3 x 26.3 3.3 0.047 µFX2 ± 20 15.0 28 8.3 x 17.3 x 17.8 3.5 0.068 µFX2 ± 20 22.5 11 7.3 x 15.3 x 26.3 4.1 0.068 µFX2 ± 20 15.0 35 10.3 x 17.3 x 17.8 4.3 0.1 µFX2 ± 20 22.5 12 8.3 x 16.3 x 26.3 4.6 0.1 µFX2 ± 20 15.0 36 13.3 x 22.3 x 17.8 4.2 0.15 µFX2 ± 20 27.5 29 8.8 x 18.3 x 31.3 6.8 0.15 µFX2 ± 20 22.5 13 10.3 x 18.3 x 26.3 6.7 0.22 µFX2 ± 20 27.5 14 11.0 x 20.3 x 31.3 9.1 0.22 µFX2 ± 20 22.5 27 12.3 x 19.8 x 26.3 8.7 0.33 µFX2 ± 20 27.5 15 13.0 x 23.3 x 31.3 12.9 0.33 µFX2 ± 20 22.5 38 15.3 x 26.3 x 26.3 14.3 0.47 µFX2 ± 20 37.5 44 12.0 x 22.3 x 41.3 15.2 0.47 µFX2 ± 20 27.5 17 16.0 x 29.3 x 31.3 20.0 0.68 µFX2 ± 20 37.5 19 15.5 x 28.3 x 41.3 24.0 0.68 µFX2 ± 20 27.5 40 17.8 x 32.8 x 31.3 24.4 1.0 µFX2 ± 20 37.5 20 17.8 x 32.3 x 41.3 31.6 1.0 µFX2 ± 20 27.5 41 19.5 x 34.8 x 31.3 29.5 Inbuilt discharging resistor on request (with larger case dimensions). * Further information about packaging quantities with different lead length and/or taped versions. See page 16 (Document No 27608 Packing Quantities). Use Box No. as reference ** These capacitors can be delivered on continuous tape and reel - see page 14/15 (Document Number 27622). The ordering code is: F1772-. . .-4290 at H = 16.5 mm F1772-. . .-4291 at H = 18.5 mm F1772-. . .-4960 at H = 16.5 mm F1772-. . .-4961 at H = 18.5 mm www.vishay.com 26 To contact us: [email protected] ORDERING CODE** F1772-310-42 . . F1772-315-42 . . F1772-322-42 . . F1772-333-42 . . F1772-347-42 . . F1772-347-426 . F1772-368-42 . . F1772-368-426 . F1772-410-42 . . F1772-410-426 . F1772-415-42 . . F1772-415-426 . F1772-422-42 . . F1772-422-426 . F1772-433-42 . . F1772-433-426 . F1772-447-42 . . F1772-447-426 . F1772-468-42 . . F1772-468-426 . F1772-510-42 . . F1772-510-426 . Document Number: 26500 Revision: 11-Jun-07 F1772-4200 AC-Capacitors, Suppression Capacitors Class X2 AC 440 V (MKT) Vishay Roederstein APPLICATION NOTES • For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 440 V (AC). • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • These capacitors can be used for series impedance application in case safety approvals are requested. • The maximum ambient temperature must not exceed 100 °C. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 620 V (DC) and divided by the applied voltage. Document Number: 26500 Revision: 11-Jun-07 To contact us: [email protected] www.vishay.com 27 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1