TDK B43641C9567M05 Snap-in capacitor Datasheet

Aluminum electrolytic capacitors
Snap-in capacitors
Series/Type:
B43641
Date:
August 2016
© EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Snap-in capacitors
B43641
Ultra compact 105 °C
Preliminary Data
Long-life grade capacitors
Applications
Power supplies
Frequency converters
Uninterruptible power supplies
Medical appliances
Solar inverters
Features
Extremely high CV product, ultra compact
High reliability
High ripple current capability
Capacitors with all insulation versions pass the needle flame
test according to IEC 60695-11-5 for all flame exposure times
up to 120 s
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case, insulated with PET sleeve without insulation
sheet at the can bottom
Snap-in solder pins to hold component in place on PC-board
Minus pole marking on case surface
Minus pole not insulated from case
Overload protection by safety vent on the base
Terminals
Standard version with 2 terminals,
2 lengths available: 6.3 and 4.5 mm
3 terminals to ensure correct insertion: length 4.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 16
B43641
Ultra compact 105 °C
Preliminary Data
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
400 ... 450 V DC
1.10 VR
120 ... 1200 μF
±20% M
Dissipation factor tan δ
(20 °C, 120 Hz)
Leakage current Ileak
(5 min, 20 °C)
tan δ ≤ 0.20
Self-inductance ESL
Approx. 20 nH
1)
Useful life
105 °C; VR; IAC,R
> 2000 h
Voltage endurance test
105 °C; VR
2000 h
Requirements:
ΔC/C ≤ 20% of initial value
tan δ
≤ 2 times initial specified limit
Ileak
≤ initial specified limit
Post test requirements:
ΔC/C ≤ 10% of initial value
tan δ
≤ 1.3 times initial specified limit
Ileak
≤ initial specified limit
Vibration resistance
test
To IEC 60068-2-6, test Fc:
Frequency range 10 Hz ... 55 Hz, displacement amplitude 0.35 mm,
acceleration max. 5 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Characteristics at low
temperature
Max. impedance
VR
ratio at 100 Hz
Z -25 °C / Z 20 °C
Z -40 °C / Z 20 °C
IEC climatic category
To IEC 60068-1: 25/105/56 (25 °C/+105 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of 40 °C to
+105 °C but the impedance at 40 °C must be taken into consideration.
Detail specification
Sectional specification
Similar to CECC 30301-809
IEC 60384-4
400 V ... 450 V
5
14
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 16
B43641
Ultra compact 105 °C
Preliminary Data
Dimensional drawings
Snap-in capacitors with PET insulation sleeve
Snap-in terminals, length (6.3 ±1) mm.
Also available in a shorter version with a
length of (4.5 1) mm. Insulation is
marked with label "PET" on the sleeve.
Safety vent on the base.
Dimensions (mm) Approx.
Packing
d +1
l ±2
weight (g) units (pcs.)
22
25
9
160
22
30
12
160
22
35
15
160
22
40
18
160
22
45
20
160
22
50
24
160
25
25
13
130
25
30
17
130
25
35
19
130
25
40
22
130
25
45
25
130
25
50
29
130
25
55
32
130
Please read Cautions and warnings and
Important notes at the end of this document.
Snap-in capacitors are also available with
3 terminals (length (4.5 1) mm). Insulation is
marked with label "PET" on the sleeve. Safety
vent on the base.
Dimensions (mm)
d +1
l ±2
30
25
30
30
30
35
30
40
30
45
30
50
30
55
Dimensions (mm)
d +1
l +2.5/2.0
35
25
35
30
35
35
35
40
35
45
35
50
35
55
Page 4 of 16
Approx.
weight (g)
17
23
29
36
41
46
53
Approx.
weight (g)
22
29
36
41
56
70
81
Packing
units (pcs.)
80
80
80
80
80
80
80
Packing
units (pcs.)
60
60
60
60
60
60
60
B43641
Ultra compact 105 °C
Preliminary Data
Packing of snap-in capacitors
For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in
part) in the correct position for insertion.
Ordering codes for terminal styles and insulation features
Identification in 3rd block of ordering code
Snap-in capacitors
Terminal version
Insulation
PET sleeve
Standard terminals 6.3 mm
M050
Short terminals 4.5 mm
M057
3 terminals 4.5 mm
M052
Ordering examples:
B43641A9157M057
B43641A9157M052
}
}
snap-in capacitor with short terminals and PET sleeve
snap-in capacitor with 3 terminals and PET sleeve
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 16
B43641
Ultra compact 105 °C
Preliminary Data
Overview of available types
VR (V DC)
400
420
450
Case dimensions d × l (mm)
CR (μF)
120
22 × 25
22 × 25
150
22 × 25
22 × 30
22 × 30
25 × 25
180
22 × 30
25 × 25
22 × 35
25 × 25
22 × 35
25 × 30
220
22 × 35
25 × 30
22 × 40
25 × 30
22 × 40
25 × 35
30 × 25
270
22 × 40
25 × 30
30 × 25
22 × 45
25 × 35
30 × 25
22 × 50
25 × 40
30 × 30
330
22 × 45
25 × 35
30 × 30
22 × 50
25 × 40
30 × 30
35 × 25
25 × 45
30 × 35
35 × 25
390
25 × 40
30 × 30
35 × 25
25 × 45
30 × 35
35 × 30
25 × 50
30 × 35
35 × 30
470
25 × 50
30 × 35
35 × 30
25 × 55
30 × 40
35 × 30
30 × 45
35 × 35
560
25 × 55
30 × 40
35 × 30
30 × 45
35 × 35
30 × 50
35 × 40
680
30 × 45
35 × 35
30 × 55
35 × 40
30 × 55
35 × 45
820
30 × 55
35 × 40
35 × 45
35 × 50
1000
35 × 50
35 × 55
1200
35 × 55
The capacitance and voltage ratings listed above are available in different case sizes upon
request. Other voltage and capacitance ratings are also available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 16
B43641
Ultra compact 105 °C
Preliminary Data
Technical data and ordering codes
CR
100 Hz
20 °C
μF
Case
dimensions
d×l
mm
VR = 400 V DC
22 × 25
150
180
22 × 30
180
25 × 25
220
22 × 35
220
25 × 30
270
22 × 40
270
25 × 30
270
30 × 25
330
22 × 45
330
25 × 35
330
30 × 30
390
25 × 40
390
30 × 30
390
35 × 25
470
25 × 50
470
30 × 35
470
35 × 30
560
25 × 55
560
30 × 40
560
35 × 30
680
30 × 45
680
35 × 35
820
30 × 55
820
35 × 40
1000
35 × 50
1200
35 × 55
ESRtyp
100 Hz
20 °C
mΩ
ESRtyp
300 Hz
60 °C
mΩ
620
520
520
420
430
350
350
360
280
290
300
240
260
270
200
210
220
170
180
200
150
160
120
130
110
90
170
140
150
120
120
95
100
120
80
85
95
75
85
100
60
70
80
50
60
80
50
65
40
55
40
38
Zmax
10 kHz
20 °C
mΩ
900
750
760
620
620
500
520
540
410
420
440
360
380
410
300
320
330
250
270
300
220
240
180
200
170
140
IAC,max
100 Hz
60 °C
A
IAC,max
100 Hz
85 °C
A
IAC,R
Ordering code
100 Hz (composition see
105 °C below)
A
2.07
2.39
2.27
2.82
2.66
3.35
3.12
2.87
3.98
3.68
3.37
4.23
3.78
3.45
4.99
4.39
4.02
5.79
5.06
4.42
5.92
5.16
6.98
5.97
7.15
8.21
1.59
1.84
1.75
2.17
2.05
2.58
2.40
2.21
3.05
2.82
2.59
3.25
2.90
2.65
3.83
3.37
3.08
4.44
3.87
3.38
4.52
3.94
5.34
4.56
5.47
6.27
0.86
0.99
0.95
1.17
1.11
1.39
1.29
1.20
1.65
1.52
1.41
1.75
1.57
1.44
2.07
1.82
1.54
2.40
1.93
1.69
2.26
1.97
2.67
2.28
2.74
3.13
Composition of ordering code
# = Terminal style
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 16
B43641A9157M05#
B43641A9187M05#
B43641B9187M05#
B43641A9227M05#
B43641B9227M05#
B43641A9277M05#
B43641B9277M05#
B43641C9277M05#
B43641A9337M05#
B43641B9337M05#
B43641C9337M05#
B43641A9397M05#
B43641B9397M05#
B43641C9397M05#
B43641A9477M05#
B43641B9477M05#
B43641C9477M05#
B43641A9567M05#
B43641B9567M05#
B43641C9567M05#
B43641A9687M05#
B43641B9687M05#
B43641A9827M05#
B43641B9827M05#
B43641A9108M05#
B43641A9128M05#
B43641
Ultra compact 105 °C
Preliminary Data
Technical data and ordering codes
CR
100 Hz
20 °C
μF
Case
dimensions
d×l
mm
VR = 420 V DC
22 × 25
120
150
22 × 30
180
22 × 35
180
25 × 25
220
22 × 40
220
25 × 30
270
22 × 45
270
25 × 35
270
30 × 25
330
22 × 50
330
25 × 40
330
30 × 30
330
35 × 25
390
25 × 45
390
30 × 35
390
35 × 30
470
25 × 55
470
30 × 40
470
35 × 30
560
30 × 45
560
35 × 35
680
30 × 55
680
35 × 40
820
35 × 45
1000
35 × 55
ESRtyp
100 Hz
20 °C
mΩ
ESRtyp
300 Hz
60 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,max
100 Hz
85 °C
A
IAC,R
Ordering code
100 Hz (composition see
105 °C below)
A
980
780
650
660
540
540
440
440
460
360
360
370
390
310
310
320
250
260
280
220
230
180
190
160
130
250
200
160
180
140
140
110
120
140
90
95
110
120
80
90
100
70
75
95
65
75
50
65
55
45
1510
1210
1000
1030
820
840
670
680
710
550
560
580
610
480
490
510
400
410
440
350
370
280
300
260
210
1.67
2.00
2.33
2.20
2.75
2.58
3.28
3.05
2.79
3.89
3.60
3.27
3.06
4.15
3.74
3.51
4.89
4.35
3.92
5.02
4.50
5.95
5.23
6.05
7.20
1.26
1.51
1.76
1.66
2.08
1.95
2.47
2.30
2.10
2.93
2.71
2.46
2.31
3.13
2.82
2.65
3.69
3.28
2.95
3.79
3.39
4.49
3.94
4.56
5.42
0.74
0.89
1.04
0.98
1.23
1.15
1.46
1.36
1.24
1.73
1.60
1.46
1.36
1.84
1.67
1.44
2.18
1.78
1.60
2.06
1.84
2.44
2.14
2.47
2.95
Composition of ordering code
# = Terminal style
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 16
B43641A0127M05#
B43641A0157M05#
B43641A0187M05#
B43641B0187M05#
B43641A0227M05#
B43641B0227M05#
B43641A0277M05#
B43641B0277M05#
B43641C0277M05#
B43641A0337M05#
B43641B0337M05#
B43641C0337M05#
B43641D0337M05#
B43641A0397M05#
B43641B0397M05#
B43641C0397M05#
B43641A0477M05#
B43641B0477M05#
B43641C0477M05#
B43641A0567M05#
B43641B0567M05#
B43641A0687M05#
B43641B0687M05#
B43641A0827M05#
B43641A0108M05#
B43641
Ultra compact 105 °C
Preliminary Data
Technical data and ordering codes
CR
100 Hz
20 °C
μF
Case
dimensions
d×l
mm
VR = 450 V DC
22 × 25
120
150
22 × 30
150
25 × 25
180
22 × 35
180
25 × 30
220
22 × 40
220
25 × 35
220
30 × 25
270
22 × 50
270
25 × 40
270
30 × 30
330
25 × 45
330
30 × 35
330
35 × 25
390
25 × 50
390
30 × 35
390
35 × 30
470
30 × 45
470
35 × 35
560
30 × 50
560
35 × 40
680
30 × 55
680
35 × 45
820
35 × 50
ESRtyp
100 Hz
20 °C
mΩ
ESRtyp
300 Hz
60 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,max
100 Hz
85 °C
A
IAC,R
Ordering code
100 Hz (composition see
105 °C below)
A
910
730
740
610
610
500
500
520
400
410
420
340
340
360
280
290
300
240
250
200
210
170
180
150
240
190
200
160
160
130
130
150
100
110
120
90
95
120
75
90
100
70
80
60
70
50
60
50
1380
1110
1120
920
930
760
760
790
620
620
640
510
530
570
440
450
470
370
390
320
330
260
270
230
1.75
2.09
1.99
2.43
2.30
2.88
2.70
2.51
3.44
3.20
2.94
3.79
3.45
3.14
4.37
3.90
3.61
4.59
4.18
5.30
4.79
6.22
5.56
6.43
1.32
1.57
1.50
1.83
1.73
2.17
2.04
1.89
2.60
2.41
2.22
2.86
2.60
2.37
3.29
2.94
2.72
3.47
3.15
3.99
3.62
4.68
4.19
4.84
0.78
0.93
0.88
1.08
1.02
1.28
1.21
1.12
1.53
1.43
1.31
1.69
1.54
1.40
1.94
1.73
1.48
1.89
1.71
2.17
1.97
2.54
2.28
2.63
Composition of ordering code
# = Terminal style
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 16
B43641A5127M05#
B43641A5157M05#
B43641B5157M05#
B43641A5187M05#
B43641B5187M05#
B43641A5227M05#
B43641B5227M05#
B43641C5227M05#
B43641A5277M05#
B43641B5277M05#
B43641C5277M05#
B43641A5337M05#
B43641B5337M05#
B43641C5337M05#
B43641A5397M05#
B43641B5397M05#
B43641C5397M05#
B43641A5477M05#
B43641B5477M05#
B43641A5567M05#
B43641B5567M05#
B43641A5687M05#
B43641B5687M05#
B43641A5827M05#
B43641
Ultra compact 105 °C
Preliminary Data
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have been optimized both with a view to the intended
application and with regard to health and environmental compatibility. They do not contain any
solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no alternative materials are currently
known. However, the amount of dangerous materials used in our products is limited to an
absolute minimum.
Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously
adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU
regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.
MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data
book. MDS for customer specific capacitors are available upon request.
MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request.
Nevertheless, the following rules should be observed when handling aluminum electrolytic
capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come
into contact with the skin, wash the affected areas immediately with running water. If the eyes
are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical
treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should
be well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 16
B43641
Ultra compact 105 °C
Preliminary Data
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Polarity
Reverse voltage
Mounting
position of screwterminal capacitors
Robustness of
terminals
Mounting of
single-ended
capacitors
Soldering
Soldering,
cleaning agents
Upper category
temperature
Passive
flammability
Safety information
Reference
chapter "General
technical information"
Make sure that polar capacitors are connected
1
with the right polarity.
"Basic construction of
aluminum electrolytic
capacitors"
Voltages of opposite polarity should be prevented 3.1.6
by connecting a diode.
"Reverse voltage"
Screw terminal capacitors must not be mounted
11.1.
with terminals facing down unless otherwise
"Mounting positions of
specified.
capacitors with screw
terminals"
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2.5 Nm
M6: 4.0 Nm
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Do not exceed the upper category temperature.
7.2
"Maximum permissible
operating temperature"
Avoid external energy, e.g. fire.
8.1
"Passive flammability"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 16
B43641
Ultra compact 105 °C
Preliminary Data
Topic
Safety information
Active
flammability
Maintenance
Avoid overload of the capacitors.
Storage
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply excessive mechanical stress to the
capacitor terminals when mounting.
Do not store capacitors at high temperatures or
high humidity. Capacitors should be stored at
+5 to +35 °C and a relative humidity of ≤ 75%.
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Reference
chapter "General
technical information"
8.2
"Active flammability"
10
"Maintenance"
7.3
"Shelf life and storage
conditions"
Reference
chapter "Capacitors with
screw terminals"
"Screw terminals accessories"
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products.
Detailed information can be found on the Internet under www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 16
B43641
Ultra compact 105 °C
Preliminary Data
Symbols and terms
Symbol
English
German
C
CR
CS
CS,T
Cf
d
dmax
ESL
ESR
ESRf
Capacitance
Rated capacitance
Series capacitance
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Equivalent series resistance
Equivalent series resistance at
frequency f
Equivalent series resistance at
temperature T
Frequency
Current
Alternating current (ripple current)
Root-mean-square value of alternating
current
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Insulation resistance
Balancing resistance
Temperature
Temperature difference
Ambient temperature
Case temperature
Capacitor base temperature
Time
Period
Service life (operating hours)
Kapazität
Nennkapazität
Serienkapazität
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
f
I
IAC
IAC,RMS
IAC,f
IAC,max
IAC,R
Ileak
Ileak,op
l
lmax
R
Rins
Rsymm
T
ΔT
TA
TC
TB
t
Δt
tb
Please read Cautions and warnings and
Important notes at the end of this document.
Ersatzserienwiderstand bei Temperatur T
Frequenz
Strom
Wechselstrom
Wechselstrom, Effektivwert
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
Reststrom
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
Isolationswiderstand
Symmetrierwiderstand
Temperatur
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Temperatur des Gehäusebodens
Zeit
Zeitraum
Brauchbarkeitsdauer (Betriebszeit)
Page 13 of 16
B43641
Ultra compact 105 °C
Preliminary Data
Symbol
V
VF
Vop
VR
VS
XC
XL
Z
ZT
tan δ
λ
ε0
εr
ω
English
Voltage
Forming voltage
Operating voltage
Rated voltage, DC voltage
Surge voltage
Capacitive reactance
Inductive reactance
Impedance
Impedance at temperature T
Dissipation factor
Failure rate
Absolute permittivity
Relative permittivity
Angular velocity; 2 π f
German
Spannung
Formierspannung
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
Elektrische Feldkonstante
Dielektrizitätszahl
Kreisfrequenz; 2 π f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 16
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
Page 15 of 16
Important notes
7. The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 16 of 16