Stepper Motor Driver IC MTD Series MTD2038G DMOS Microstepping PWM Motor Driver Features ●Dual full bridge for a bipolar stepper motor driver ●Load supply voltage 40V , Output current 1.0A ●Constant current control (Fixed frequency PWM control) ●2-bit selectable current level (Full step/Half step/Quarter step) ●Stand-by function ●Thermal shutdown with hysteresis ●Under voltage lock out function ●Surface mount package with heat sink(HSOP24) HSOP24 ■Absolute maxmum ratings / Ta=25℃ Parameter Symbol Rating Unit VREGOutput current IREG 12 mA Logic input VLOGIC 0〜6 V Reference input Vｒ 0〜7 V Load supply Vmm 40 V Output current IOUT 1.0 A Power dissipation PD *1 2.1 W Storage temperature range Tstg -40〜150 ℃ Maximum Junction temperature Tj 150 ℃ *1 : 50.8×50.8×1mm3 Glass Epoxy Board(FR4),200mm2 Cupper Pattern ■Pin Assignment MTD2038G I0 A PHA A Vmm A OUT A Rs A OUT A 1 2 3 4 5 6 TOP VIEW 24 23 22 21 20 19 PG (TAB) OUT B Rs B OUT B Vmm B PHA B I0 B I1 A Vr A Vr B TEST DEC VREG PG (TAB) 7 8 9 10 11 12 18 17 16 15 14 13 Shindengen Electric Mfg.Co.Ltd LG Cp C Cp B Cp A STB I1 B W1002 Stepper Motor Driver IC MTD2038G ■Electrical Characteristics Vmm=24V,Ta=25℃ unless otherwise specified Parameter Symbol Condition MIN TYP MAX Unit 22 mA ●Output stage Load supply current（All circuit OFF） Imm(OFF) VI0A=VI1A=VI0B=VI1B=5V - 13 Load supply current（All circuit ON） Imm(ON) VI0A=VI1A=VI0B=VI1B=0V - 13 22 mA Load supply current（Stand-by） Imm(STB) VSTB=5V - - 200 μA Upper MOSFET ON resistance RONH Iout=-0.8A - 1.8 2.0 Ω Lower MOSFET ON resistance RONL Iout=0.8A - 0.8 1.0 Ω Upper MOSFET leakage current IrH Vmm=35V, VOUT=0V - - 100 μA Lower MOSFET leakage current IrL VOUT=35V, VRS=0V - - 100 μA Upper MOSFET reverse voltage VFH IF=0.8A - 1.4 1.6 V Lower MOSFET reverse voltage VFL IF=0.8A VcpA under voltage lock out threshold VcpAUVLO - - 1.1 1.3 V Vmm+3 Vmm+4 Vmm+6 V IREG=500μA 4.85 5.00 5.15 V ●Logic stage VREGoutput voltage VREG IREG=12mA 4.75 - 5.25 V PHA/I0/I1/DEC "H" input voltage VLOGICH - 2.0 - VREG V PHA/I0/I1/DEC "L" input voltage VLOGICL - GND - 0.8 V STB "H" input voltage VSTBH - 2.3 - VREG V STB "L" input voltage VSTBL - GND - 0.8 V PHA/I0/I1 "H" input current IPHA/I0/I1H VPHA/I0/I1=5V - - 10 μA PHA/I0/I1 "L" input current IPHA/I0/I1L VPHA/I0/I1=0V - -20 -50 μA STB "H" input current ISTBH VSTB=5V - 45 90 μA STB "L" input current ISTBL VSTB=0V - - -10 μA DEC "H" input current IDECH VDEC=5V - 75 150 μA DEC "L" input current IDECL VDEC=0V - - -10 μA Vr "H" input current IrefH Vr=4V - 1 10 μA Vr "L" input current IrefL Vr=0V - -1 -10 μA Comparator threshold voltage (100%) Vs1 VI0(AorB)="L", VI1(AorB)="L" 95 100 105 % Comparator threshold voltage (70%) Vs2 VI0(AorB)="H", VI1(AorB)="L" 64 70 76 % Comparator threshold voltage (40%) Vs3 VI0(AorB)="L", VI1(AorB)="H" 36 40 44 % Oscillator frequency fOSC - 20 30 40 kHz Comparator blanking time tb - - 0.65 - μs CpA charging time *1 Tchg Cp1=0.22μF,Cp2=0.01μF,VSTB=5V→0V Thermal shutdown temperature *2 TTSD - - - 1.5 ms 150 170 190 ℃ *1: Charge of a charge pump takes time. Therefore, please take the time more than Tchg from aftre Vcc input or Stand-by release to even before a motor drive start. *2: TTSD is design value. ■Thermal resistance Symbol Rating Unit θja *3 58 ℃/W *3: 50.8×50.8×1mm3 Glass Epoxy Board(FR4),200mm2 Cupper Pattern Shindengen Electric Mfg.Co.Ltd W1002 Stepper Motor Driver IC MTD2038G ■Recommended operation conditions Parameter Symbol Recommendation Unit Junction temperature Tj -25〜120 ℃ Load supply Vmm 15〜35 V Reference voltage Vr 0〜6 V ■Truth table I0 A(B) and I1 A(B) PHA A or B OUT A or B OUT A or B L H H L L L L H H × OFF OFF ×：don't care I0 A(B) I1 A(B) Current Level(％) L L 100 H L 70 L H 40 H H 0 STB *1 Mode L or OPEN ACTIVE H Stand-By DEC *1 Current Decay Mode L or OPEN Slow Decay H Mix Decay(37.5% Fast) *1 built-in pull-down resistance Shindengen Electric Mfg.Co.Ltd W1002 Stepper Motor Driver IC MTD2038G ■Block diagram / Typical application Vmm Cvmm VREG VmmA TSD OUTA OUTA OUTB OUTB VmmB Cp2 CpA CpB UVLO CpC Charge Pump Stand-by PHA A STB PHA B GATE CIRCUIT GATE CIRCUIT CPU or GATE ARRAY Stand-by Decay Vr Cp1 Decay VrA VrB 1/5 Current Sensor Q 2-bit digital current selection I1A R S S 2-bit digital current selection Oscillator DEC RsA LG PG(TAB) RsB Rs CPU or GATE ARRAY TEST Rs Vr Q VREG Decay Mix Decay% selection I0A 1/5 . Current Sensor R CPU or GATE ARRAY CVREG OPEN or "H" I0B I1B CPU or GATE ARRAY ●Recommended component values Symbol Recommended component values Unit Cp1 0.22 μF Cp2 0.01 μF CVREG 0.1 μF Rs 0.68 Ω Cvmm *1 47 μF *1： It recommend the electrolytic capacitor for the noise absorption connect near IC to Load supply. ●Constant chopping current level Ichop = Ichop Vr 5×Rs Output current 0A Shindengen Electric Mfg.Co.Ltd W1002 Stepper Motor Driver IC MTD2038G ■Outline Drawing (Unit : mm) Shindengen Electric Mfg.Co.Ltd W1002 Stepper Motor Driver IC ! ! MTD2038G Although we are constantly making every effort to improve the quality and reliability of our products, there nevertheless remains a certain probability that the semiconductor products may occasionally fail or malfunction. Please take careful precautions against product failures or malfunctions to avoid any injuries, fire accidents or social loss by implementing safety designs such as redundancy designs, designs for fi re spread prevention, and designs for preventing malfunctions. Our semiconductor products listed in this document are not designed or manufactured to be used in devices or systems requiring extremely high levels of quality and reliability, or the failure or malfunction of which may directly threaten human lives or cause injury. In the cases where the products are to be used in devices or systems for special applications or devices or systems for specialized applications shown below, always make sure to consult us in advance. Special Applications Transportation devices (automotive, marine, etc.), communication devices for core network, traffic signal devices, fire prevention/anticrime devices, various safety devices, medical devices, etc. Specialized Applications Nuclear power control systems, aircraft and aerospace devices, submarine relay devices, and systems for preserving life, etc. Even if it is not for a special or specialized application, when IC products are to be used for devices or systems that are desired to last for a long period under continuous operation, please make sure to consult our sales representative in advance. ● We reserve the right to make any changes to the contents of this manual without prior notice in accordance with modifications to IC products. ● Details of specifications should be exchanged at the adoption of the IC products. ● All information included in this manual is believed to be accurate and reliable. However, our company takes no responsibility for any injury or damage incurred when using the IC products as described in this manual. Neither do we take any responsibility for issues arising from infringement of patent or other rights caused by using this manual. ● The provision of this manual does not guarantee the right to use any third party's patent or other rights, or grant permission to use the patent or other rights of our company. ● No part of this manual may be reproduced or copied without the specific written consent of Shindengen Electric Mfg. Co., Ltd. Shindengen Electric Mfg.Co.Ltd W1002