IRF IRS2301S

September 30, 2009
Datasheet No – PD 97421
IRS2301S
HIGH AND LOW SIDE DRIVER
Product Summary
Features
•
•
•
•
•
•
•
•
•
•
Floating channel designed for bootstrap operation
VOFFSET
Fully operational to +600V
Tolerant to negative transient voltage – dV/dt immune
VOUT
Gate drive supply range from 5V to 20V
Io+ & I o- (min)
Undervoltage lockout for both channels
3.3V, 5V and 15V input logic compatible
tON & tOFF (typical)
Matched propagation delay for both channels
Delay Matching
Outputs in phase with inputs
Lower di/dt gate driver for better noise immunity
Leadfree, RoHS compliant
Package Options
600V Max
5V – 20V
120mA / 250mA
220ns / 200ns
50ns
Typical Applications
o Appliance motor drives
o Servo drives
o Micro inverter drives
o General purpose three phase inverters
8-Lead SOIC
IRS2301S
Typical Connection Diagram
www.irf.com
© 2009 International Rectifier
1
IRS2301S
Table of Contents
Page
Typical Connection Diagram
1
Description
3
Feature Comparison
3
Qualification Information
4
Absolute Maximum Ratings
5
Recommended Operating Conditions
5
Dynamic Electrical Characteristics
6
Static Electrical Characteristics
6
Functional Block Diagram
7
Input/output Timing Diagram
8
Lead Definitions
9
Lead Assignments
9
Application Information and Additional Details
10
Package Details
11
Tape and Reel Details
12
Part Marking Information
13
Ordering Information
14
www.irf.com
© 2009 International Rectifier
2
IRS2301S
Description
The IRS2301S is a high voltage, high speed power MOSFET and IGBT driver with independent high- and lowside referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized
monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic.
The output drivers feature a high pulse current buffer stage. The floating channel can be used to drive an Nchannel power MOSFET or IGBT in the high-side configuration which operates up to 600V.
www.irf.com
© 2009 International Rectifier
3
IRS2301S
Qualification Information†
Qualification Level
Moisture Sensitivity Level
Machine Model
ESD
Human Body Model
IC Latch-Up Test
RoHS Compliant
†
††
†††
Industrial††
Comments: This family of ICs has passed JEDEC’s
Industrial qualification. IR’s Consumer qualification level
is granted by extension of the higher Industrial level.
MSL2††† 260°C
(per IPC/JEDEC J-STD-020)
Class B
(per JEDEC standard JESD22-A115)
Class 2
(per EIA/JEDEC standard EIA/JESD22-A114)
Class I, Level A
(per JESD78)
Yes
Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
Higher qualification ratings may be available should the user have such requirements. Please contact
your International Rectifier sales representative for further information.
Higher MSL ratings may be available for the specific package types listed here. Please contact your
International Rectifier sales representative for further information.
www.irf.com
© 2009 International Rectifier
4
IRS2301S
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage
parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are
measured under board mounted and still air conditions.
Symbol
VB
Definition
High-side floating absolute voltage
Min.
Max.
-0.3
625
VS
VHO
VCC
VLO
VIN
dVS/dt
High-side floating supply offset voltage
High-side floating output voltage
Low-side and logic fixed supply voltage
Low-side output voltage
Logic input voltage (HIN & LIN)
Allowable offset supply voltage transient
VB - 25
VS - 0.3
-0.3
-0.3
COM -0.3
—
VB + 0.3
VB + 0.3
25
VCC + 0.3
VCC + 0.3
50
PD
RthJA
—
—
0.625
200
TJ
Package power dissipation @ TA ≤ 25°C
Thermal resistance, junction to ambient
Junction temperature
—
150
TS
TL
Storage temperature
Lead temperature (soldering, 10 seconds)
-50
—
150
300
Units
V
V/ns
W
°C/W
°C
Recommended Operating Conditions
The input/output logic timing diagram is shown in Fig. 1. For proper operation the device should be used within
the recommended conditions. The VS offset rating is tested with all supplies biased at 15V differential.
Symbol
Definition
Min.
VB
High-side floating supply absolute voltage
VS + 5
VS
High-side floating supply offset voltage
†1
VHO
High-side floating output voltage
VS
VCC
Low-side and logic fixed supply voltage
5
VLO
Low-side output voltage
0
VIN
Logic input voltage (HIN & LIN)
COM
TA
Ambient temperature
-40
†: Logic operational for VS of -5 V to +600 V. Logic state held for VS of -5 V to – VBS.
(Please refer to the Design Tip DT97 -3 for more details).
www.irf.com
Max.
VS + 20
600
VB
20
VCC
VCC
125
Units
V
°C
© 2009 International Rectifier
5
IRS2301S
Static Electrical Characteristics
VBIAS (VCC, VBS) = 15V and TA = 25°C unless otherwise specified. The VIL, VIH and IIN parameters are
referenced to COM and are applicable to the respective input leads: HIN and LIN. The VO, IO and Ron
parameters are referenced to COM and are applicable to the respective output leads: HO and LO.
Symbol
VIH
VIL
VOH
VOL
ILK
IQBS
IQCC
IIN+
IINVCCUV+
VBSUV+
VCCUVVBSUV-
Definition
Logic “1” input voltage
Logic “0” input voltage
High level output voltage, VBIAS - VO
Low level output voltage, VO
Offset supply leakage current
Quiescent VBS supply current
Quiescent VCC supply current
Logic “1” input bias current
Logic “0” input bias current
VCC and VBS supply undervoltage positive
going threshold
VCC and VBS supply undervoltage negative
going threshold
Min
2.5
—
—
—
—
60
60
—
—
Typ
—
—
—
—
—
160
160
5
—
Max
—
0.8
0.2
0.1
50
260
260
20
5
3.3
4.1
5
3
3.8
4.7
Hysteresis
0.1
0.3
—
IO+
Output high short circuit pulsed current
—
200
—
IO-
Output low short circuit pulsed current
—
350
—
VCCUVH
VBSUVH
Units
Test conditions
V
VCC = 10V to 20V
V
IO = 2mA
VB = VS = 600V
VIN = 0V or 5V
µA
VIN = 5V
VIN = 0V
V
VO = 0V,
PW ≤ 10µs
VO = 15V,
PW ≤ 10µs
mA
Dynamic Electrical Characteristics
VBIAS (VCC, VBS) = 15V, CL = 1000pF, TA = 25°C unless otherwise specified.
Symbol
ton
toff
MT
tr
tf
Definition
Turn-on propagation delay
Turn-off propagation delay
Delay matching, HS & LS turn-on/off
Turn-on rise time
Turn-off fall time
Min
—
—
—
—
—
www.irf.com
Typ
220
200
0
130
50
Max
300
280
50
220
80
Units
Test conditions
VS = 0V
VS = 0V or 600V
ns
VS = 0V
© 2009 International Rectifier
6
IRS2301S
Functional Block Diagram:
www.irf.com
© 2009 International Rectifier
7
IRS2301S
Input/Output Pin Equivalent Circuit Diagrams:
VB
ESD
Diode
25V
HO
ESD
Diode
VS
600V
VCC
ESD
Diode
LO
25V
ESD
Diode
COM/VSS
www.irf.com
© 2009 International Rectifier
8
IRS2301S
Lead Definitions:
PIN# Symbol
1
2
3
4
5
6
7
8
VCC
HIN
LIN
COM
LO
VS
HO
VB
Description
Low-side and logic fixed supply
Logic input for high-side gate driver outputs (HO), in phase with HO
Logic input for low-side gate driver outputs (LO), in phase with LO
Low-side return
Low-side gate drive output
High-side floating supply return
High-side gate drive output
High-side floating supply
Lead Assignments
www.irf.com
© 2009 International Rectifier
9
IRS2301S
Application Information and Additional Details
Figure 1: Input/Output Timing Diagram
Figure 2: Switching Time Waveform Definitions
Figure 3: Delay Matching Waveform Definitions
www.irf.com
© 2009 International Rectifier
10
IRS2301S
Tolerability to Negative VS Transients
-30
-20
Vs (V)
-10
0
The IRS2301S has been seen to withstand negative VS transient conditions on the order of -25V for a period of
100 ns (VBIAS (VCC, VBS) = 15V and TA = 25°C).
An illustration of the IRS2301S performance can be seen in Figure 4.
Even though the IRS2301S has been shown able to handle these negative VS transient conditions, it is highly
recommended that the circuit designer always limit the negative VS transients as much as possible by careful
PCB layout and component use.
Figure 4: -Vs Transient results
www.irf.com
© 2009 International Rectifier
11
IRS2301S
Package Details
www.irf.com
© 2009 International Rectifier
12
IRS2301S
Tape and Reel Details
LOADED TAPE FEED DIRECTION
A
B
H
D
F
C
NOTE : CONTROLLING
DIMENSION IN MM
E
G
CARRIER TAPE DIMENSION FOR 8SOICN
Metric
Imperial
Code
Min
Max
Min
Max
A
7.90
8.10
0.311
0.318
B
3.90
4.10
0.153
0.161
C
11.70
12.30
0.46
0.484
D
5.45
5.55
0.214
0.218
E
6.30
6.50
0.248
0.255
F
5.10
5.30
0.200
0.208
G
1.50
n/a
0.059
n/a
H
1.50
1.60
0.059
0.062
F
D
C
B
A
E
G
H
REEL DIMENSIONS FOR 8SOICN
Metric
Code
Min
Max
A
329.60
330.25
B
20.95
21.45
C
12.80
13.20
D
1.95
2.45
E
98.00
102.00
F
n/a
18.40
G
14.50
17.10
H
12.40
14.40
Imperial
Min
Max
12.976
13.001
0.824
0.844
0.503
0.519
0.767
0.096
3.858
4.015
n/a
0.724
0.570
0.673
0.488
0.566
www.irf.com
© 2009 International Rectifier
13
IRS2301S
Part Marking Information
www.irf.com
© 2009 International Rectifier
14
IRS2301S
Ordering Information
Standard Pack
Base Part Number
IRS2301
Package Type
SOIC8N
Complete Part Number
Form
Quantity
Tube/Bulk
95
IRS2301SPBF
Tape and Reel
2500
IRS2301STRPBF
The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no
responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of
patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or
otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change
without notice. This document supersedes and replaces all information previously supplied.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
233 Kansas St., El Segundo, California 90245
Tel: (310) 252-7105
www.irf.com
© 2009 International Rectifier
15