MORN www.vishay.com Vishay Dale Thin Film Molded, Compact, 0.65 mm Pitch, Dual-In-Line Thin Film Resistor, Surface-Mount Network 0.01 % Ratio Tolerance and 1 ppm/°C TCR Tracking FEATURES • Low TCR tracking of ± 1 ppm/°C and ratio tolerance as low as ± 0.01 % Available • 1.10 mm (0.043 mil) maximum seated height • Excellent long-term ratio stability, ± 0.015 % Available over 2000 h at 70 °C • JEDEC® MO-187 variation AA package (25 mil pitch, QSOP) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MORN series resistor networks feature four isolated resistors with standard 0.65 mm (25.6 mil) pitch lead spacing. The networks feature close TCR tracking and tight ratio tolerance and are ideally suited for unity gain operational amplifier circuitry. The standard resistance offerings listed are available for immediate delivery. SCHEMATICS Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. TYPICAL PERFORMANCE TCR 8 7 6 5 TOL. R1 (Ref) R1 R1 ABSOLUTE TRACKING 25 1 ABSOLUTE RATIO 0.1 0.01 R1 STANDARD RESISTANCE OFFERING (R1 =) 1 2 3 500 1 k 2 k 4.99 k 5 k 4 10 k 20 k 25 k 50 k 100 k Note • Consult factory for additional values and schematics. STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 09-Nov-15 SPECIFICATIONS Passivated nichrome 8 400 to 100 k per resistor ± 25 ppm/°C ± 1 ppm/°C (typical) ; ± 2 ppm/°C (max.) ± 0.05 % to ± 1.0 % ± 0.01 % to ± 0.5 % 50 mW 200 mW R ± 0.05 % R ± 0.015 % 0.1 ppm/V (typical) 50 V max. not to exceed P x R -55 °C to +125 °C -55 °C to +155 °C -30 dB 0.08 μV/°C R ± 0.01 % R ± 0.002 % CONDITIONS -55 °C to +125 °C -55 °C to +125 °C +25 °C +25 °C Maximum at +70 °C Maximum at +70 °C 2000 h at +70 °C 2000 h at +70 °C 1 year at +25 °C 1 year at +25 °C Document Number: 60129 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MORN www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS A 0.118 3.00 B 0.0118 ± 0.0086 0.3 ± 0.08 C 0.0256 0.65 D 0.118 max. 3.00 E 0.006 ± 0.003 0.16 ± 0.08 F 0.024 ± 0.008 0.60 ± 0.20 G 0.193 4.90 H 0.043 max. 1.10 I 0.006 max. 0.15 max. Ø 0° to 8° 0° to 8° E B Resistance Value Code C F MORNA A G Date Code Ø D H I Seating Plane Note • Marking - Vishay symbol, part number from ordering information. LAND PATTERN DIMENSIONS DERATING CURVE MORN MSOP MO-187AA (MORN-8) 0.0400 0.1700 100 Precent of Rated Power 0.0160 100 % = 0.20 W 80 60 40 20 0 0 70 125 155 Ambient Temperature °C 0.0256 MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Silicon Body Terminals Lead (Pb)-free Option Molded epoxy Copper alloy 100 % matte tin Tin Lead Option Sn90 Tin Lead and Lead (Pb)-free Finish Plated Revision: 09-Nov-15 Document Number: 60129 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MORN www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MORNA1002AUF M O R N T A 1 GLOBAL MODEL (4 or 5 digits) SCHEMATIC RESISTANCE MORN (Tin lead) A = 4 isolated equal resistors First 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. MORNT (Lead (Pb)-free) (e3) Example: 1002 = 10 k 1003 = 100 k 4991 = 4.99 k 5000 = 500 0 0 2 TOLERANCE AND RATIO TOLERANCE Abs. Tol. Q = ± 0.05 % (1) Z = ± 0.1 % (1) A = ± 0.1 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F=±1% Ratio ± 0.01 % ± 0.025 % ± 0.05 % ± 0.1 % ± 0.1 % ± 0.1 % ± 0.5 % A U F PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 300 TS = 100 min., 1 mult UF = TUBED Notes (1) Tolerance available 1K and up (2) Preferred packaging code Revision: 09-Nov-15 Document Number: 60129 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000