FJP13009 High Voltage Fast-Switching NPN Power Transistor • High Voltage Capability • High Switching Speed • Suitable for Electronic Ballast and Switching Mode Power Supply 1 1.Base Absolute Maximum Ratings* Symbol TO-220 2.Collector 3.Emitter TC = 25°C unless otherwise noted (notes_1) Parameter Value Units VCBO Collector-Base Voltage 700 V VCEO Collector-Emitter Voltage 400 V VEBO Emitter-Base Voltage 9 V IC Collector Current (DC) 12 A ICP Collector Current (Pulse) 24 A IB Base Current 6 A PC Collector Dissipation (TC = 25°C) 100 W TJ Junction Temperature 150 °C TSTG Storage Temperature Range -65 ~ 150 °C * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES_1: 1) These ratings are based on a maximum junction temperature of 150°C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Package Marking and Ordering Information Device Item (notes_2) Device Marking FJP13009 J13009 FJP13009H2TU J130092 FJP13009TU J13009 Package Packing Method Qty(pcs) TO-220 Bulk 1,200 TO-220 TUBE 1,000 TO-220 TUBE 1,000 Notes_2 : 1) The Affix “-H2” means the hFE classification. 2) The Suffix “-TU” means the Tube packing method, which can be on fairchildsemi website at http://www.fairchildsemi.com/packaging. ©2007 Fairchild Semiconductor Corporation FJP13009 Rev. B 1 www.fairchildsemi.com FJP13009 High Voltage Fast-Switching NPN Power Transistor March 2007 Symbol VCEO(sus) TC = 25°C unless otherwise noted Parameter Conditions Min. Typ. Max 400 Units Collector-Emitter Sustaining Voltage IC = 10mA, IB = 0 V IEBO Emitter Cut-off Current VEB = 9V, IC = 0 hFE * DC Current Gain VCE = 5V, IC = 5A (hFE1) VCE = 5V, IC = 8A VCE(sat) * Collector-Emitter Saturation Voltage IC = 5A, IB = 1A IC = 8A, IB = 1.6A IC = 12A, IB = 3A 1 1.5 3 V V V VBE (sat) * Base-Emitter Saturation Voltage IC = 5A, IB = 1A IC = 8A, IB = 1.6A 1.2 1.6 V V Cob Output Capacitance VCB = 10V, f = 0.1MHz fT Current Gain Bandwidth Product VCE = 10V, IC = 0.5A tON Turn On Time tSTG Storage Time VCC = 125V, IC = 8A IB1 = - IB2 = 1.6A, RL = 15,6Ω tF Fall Time 1 8 6 mA 40 30 180 pF 4 MHz 1.1 µs 3 µs 0.7 µs * Pulse Test: PW ≤ 300µs, Duty Cycle ≤ 2% hFE Classification Classification H1 H2 hFE1 8 ~ 17 15 ~ 28 2 FJP13009 Rev. B www.fairchildsemi.com FJP13009 High Voltage Fast-Switching NPN Power Transistor Electrical Characteristics VBE(sat), VCE(sat)[V], SATURATION VOLTAGE 100 hFE, DC CURRENT GAIN VCE = 5V 10 1 0.1 1 10 10 IC = 3 IB 1 VBE(sat) 0.1 0.01 0.1 100 IC[A], COLLECTOR CURRENT VCE(sat) 1 10 100 IC[A], COLLECTOR CURRENT Figure 1. DC current Gain Figure 2. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage 10000 1000 tR, tD [ns], TURN ON TIME Cob[pF], CAPACITANCE VCC=125V IC=5IB 100 10 1 0.1 1 10 100 1000 tR tD, VBE(off)=5V 100 10 0.1 1000 VCB[V], COLLECTOR BASE VOLTAGE Figure 3. Collector Output Capacitance 10 100 Figure 4. Turn On Time 10000 100 100 0.1 1 10 1 0.1 0.01 100 1 IC[A], COLLECTOR CURRENT 10 100 1000 VCE[V], COLLECTOR-EMITTER VOLTAGE Figure 5. Turn Off Time Figure 6. Forward Bias Safe Operating Area 3 FJP13009 Rev. B µs 10 tF s 1m 1000 10 s tSTG 0µ 10 IC[A], COLLECTOR CURRENT VCC=125V IC=5IB DC tSTG, tF [ns], TURN OFF TIME 1 IC[A], COLLECTOR CURRENT www.fairchildsemi.com FJP13009 High Voltage Fast-Switching NPN Power Transistor Typical Performance Characteristics (Continued) 120 Vcc=50V, IB1=1A, IB2 = -1A L = 1mH PC[W], POWER DISSIPATION IC[A], COLLECTOR CURRENT 100 10 1 0.1 0.01 10 80 60 40 20 0 100 1000 10000 0 VCE[V], COLLECTOR-EMITTER VOLTAGE 25 50 75 100 125 150 175 o TC[ C], CASE TEMPERATURE Figure 7. Reverse Bias Safe Operating Area Figure 8. Power Derating 4 FJP13009 Rev. B 100 www.fairchildsemi.com FJP13009 High Voltage Fast-Switching NPN Power Transistor Typical Performance Characteristics FJP13009 High Voltage Fast-Switching NPN Power Transistor Mechanical Dimensions TO-220 4.50 ±0.20 2.80 ±0.10 (3.00) +0.10 1.30 –0.05 18.95MAX. (3.70) ø3.60 ±0.10 15.90 ±0.20 1.30 ±0.10 (8.70) (1.46) 9.20 ±0.20 (1.70) 9.90 ±0.20 1.52 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] 10.08 ±0.30 (1.00) 13.08 ±0.20 ) (45° 1.27 ±0.10 +0.10 0.50 –0.05 2.40 ±0.20 2.54TYP [2.54 ±0.20] 10.00 ±0.20 Dimensions in Millimeters 5 FJP13009 Rev. B www.fairchildsemi.com TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ® ACEx Across the board. Around the world.™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ CTL™ Current Transfer Logic™ DOME™ 2 E CMOS™ ® EcoSPARK EnSigna™ FACT Quiet Series™ ® FACT ® FAST FASTr™ FPS™ ® FRFET GlobalOptoisolator™ GTO™ HiSeC™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ MICROCOUPLER™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ ® OPTOLOGIC ® OPTOPLANAR PACMAN™ POP™ ® Power220 ® Power247 PowerEdge™ PowerSaver™ ® PowerTrench Programmable Active Droop™ ® QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ ScalarPump™ SMART START™ ® SPM STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ ® The Power Franchise ® TinyLogic TINYOPTO™ TinyPower™ TinyWire™ TruTranslation™ μSerDes™ ® UHC UniFET™ VCX™ Wire™ ™ TinyBoost™ TinyBuck™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Definition Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I24 © 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com