NSC LM336BZ-5.0 5.0v reference diode Datasheet

LM136-5.0/LM236-5.0/LM336-5.0
5.0V Reference Diode
General Description
The LM136-5.0/LM236-5.0/LM336-5.0 integrated circuits are
precision 5.0V shunt regulator diodes. These monolithic IC
voltage references operate as a low temperature coefficient
5.0V zener with 0.6Ω dynamic impedance. A third terminal
on the LM136-5.0 allows the reference voltage and temperature coefficient to be trimmed easily.
The LM136-5.0 series is useful as a precision 5.0V low
voltage reference for digital voltmeters, power supplies or op
amp circuitry. The 5.0V makes it convenient to obtain a
stable reference from low voltage supplies. Further, since
the LM136-5.0 operates as a shunt regulator, it can be used
as either a positive or negative voltage reference.
The LM136-5.0 is rated for operation over −55˚C to +125˚C
while the LM236-5.0 is rated over a −25˚C to +85˚C temperature range. The LM336-5.0 is rated for operation over a
0˚C to +70˚C temperature range. See the connection diagrams for available packages. For applications requiring
2.5V see LM136-2.5.
Features
n
n
n
n
n
n
n
n
n
Adjustable 4V to 6V
Low temperature coefficient
Wide operating current of 600 µA to 10 mA
0.6Ω dynamic impedance
± 1% initial tolerance available
Guaranteed temperature stability
Easily trimmed for minimum temperature drift
Fast turn-on
Three lead transistor package
Connection Diagrams
SO Package
TO-92
Plastic Package
00571604
Bottom View
Order Number LM336Z-5.0 or LM336BZ-5.0
See NS Package Number Z03A
00571607
Order Number LM336M-5.0 or LM336BM-5.0
See NS Package Number M08A
TO-46
Metal Can Package
00571605
Bottom View
Order Number LM136H-5.0,
LM136H-5.0/883, LM236H-5.0,
LM136AH-5.0, LM136AH-5.0/883,
or LM236AH-5.0
See NS Package Number H03H
© 2003 National Semiconductor Corporation
DS005716
www.national.com
LM136-5.0/LM236-5.0/LM336-5.0 5.0V Reference Diode
September 2003
LM136-5.0/LM236-5.0/LM336-5.0
Typical Applications
Trimmed 4V to 6V Reference
with Temperature Coefficient
Independent of Breakdown Voltage
5.0V Reference
00571601
5.0V Reference with Minimum
Temperature Coefficient
00571603
* Does not affect temperature coefficient
00571615
† Adjust to 5.00V
* Any silicon signal diode
www.national.com
2
(Note 1)
LM336-5.0
Soldering Information
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Reverse Current
15mA
Forward Current
TO-92 Package (10 sec.)
260˚C
TO-46 Package (10 sec.)
300˚C
SO Package
10mA
Storage Temperature
−60˚C to +150˚C
Operating Temperature Range (Note 2)
LM136-5.0
−55˚C to +150˚C
LM236-5.0
−25˚C to +85˚C
0˚C to +70˚C
Vapor Phase (60 sec.)
215˚C
Infrared (15 sec.)
220˚C
See AN-450 “Surface Mounting Methods and Their Effect on
Product Reliability” (appendix D) for other methods of soldering surface mount devices.
Electrical Characteristics
(Note 3)
LM136A-5.0/LM236A-5.0
Parameter
Conditions
LM336B-5.0
LM136-5.0/LM236-5.0
LM136-5.0/LM236-5.0/LM336-5.0
4.9
5.00
5.1
4.8
5.00
5.2
V
LM136A-5.0/LM236A-5.0, LM336B-5.0
4.95
5.00
5.05
4.90
5.00
5.1
V
6
12
6
20
mV
0.6
1.2
0.6
2
Ω
4
12
−25˚C≤TA≤+85˚C (LM236-5.0)
7
18
mV
−55˚C≤TA≤+125˚C (LM136-5.0)
20
36
mV
600 µA≤IR≤10 mA
6
17
Circuit of Figure 1
±1
Reverse Dynamic Impedance
IR = 1 mA
0.8
Long Term Stability
TA=25˚C ± 0.1˚C, IR=1 mA, t = 1000 hrs
20
Reverse Breakdown Change
Typ
Max
TA=25˚C, IR=1 mA
TA=25˚C,
With Current
600 µA≤IR≤10 mA
Reverse Dynamic Impedance
TA=25˚C, IR=1 mA, f = 100 Hz
Temperature Stability
VR Adjusted 5.00V
(Note 4)
IR=1 mA, (Figure 2)
0˚C≤TA≤70˚C (LM336-5.0)
Reverse Breakdown Change
Min
Units
Typ
Reverse Breakdown Voltage
Max
LM336-5.0
Min
6
24
mV
mV
With Current
Adjustment Range
±1
1.6
0.8
20
V
2.5
Ω
ppm
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device
beyond its specified operating conditions.
Note 2: For elevated temperature operation, Tj max is:
LM136
150˚C
LM236
125˚C
LM336
100˚C
Thermal Resistance
θja (Junction to Ambient)
TO-92
180˚C/W (0.4" Leads)
TO-46
SO-8
440˚C/W 165˚C/W
170˚C/W (0.125"
Leads)
θja (Junction to Case)
N/A
80˚C/W
N/A
Note 3: Unless otherwise specified, the LM136-5.0 is specified from −55˚C≤TA≤+125˚C, the LM236-5.0 from −25˚C≤TA≤+85˚C and the LM336-5.0 from
0˚C≤TA≤+70˚C.
Note 4: Temperature stability for the LM336 and LM236 family is guaranteed by design. Design limits are guaranteed (but not 100% percent production tested) over
the indicated temperature and supply voltage ranges. These limits are not used to calculate outgoing quality levels. Stability is defined as the maximum charge in
VREF from 25˚C to TA(min) or TA(max).
3
www.national.com
LM136-5.0/LM236-5.0/LM336-5.0
Absolute Maximum Ratings
LM136-5.0/LM236-5.0/LM336-5.0
Typical Performance Characteristics
Reverse Voltage Change
Zener Noise Voltage
00571617
00571618
Dynamic Impedance
Response Time
00571620
00571619
Reverse Characteristics
Temperature Drift
00571622
00571621
www.national.com
4
LM136-5.0/LM236-5.0/LM336-5.0
Typical Performance Characteristics
(Continued)
Forward Characteristics
00571623
Application Hints
The LM136-5.0 series voltage references are much easier to
use than ordinary zener diodes. Their low impedance and
wide operating current range simplify biasing in almost any
circuit. Further, either the breakdown voltage or the temperature coefficient can be adjusted to optimize circuit performance.
Figure 1 shows an LM136-5.0 with a 10k potentiometer for
adjusting the reverse breakdown voltage. With the addition
of R1 the breakdown voltage can be adjusted without affecting the temperature coefficient of the device. The adjustment
range is usually sufficient to adjust for both the initial device
tolerance and inaccuracies in buffer circuitry.
If minimum temperature coefficient is desired, four diodes
can be added in series with the adjustment potentiometer as
shown in Figure 2. When the device is adjusted to 5.00V the
temperature coefficient is minimized. Almost any silicon signal diode can be used for this purpose such as a 1N914,
1N4148 or a 1N457. For proper temperature compensation
the diodes should be in the same thermal environment as
the LM136-5.0. It is usually sufficient to mount the diodes
near the LM136-5.0 on the printed circuit board. The absolute resistance of the network is not critical and any value
from 2k to 20k will work. Because of the wide adjustment
range, fixed resistors should be connected in series with the
pot to make pot setting less critical.
00571610
FIGURE 2. Temperature Coefficient Adjustment
(Trim Range = ± 0.5V Typical)
00571609
FIGURE 1. LM136-5.0 with Pot for Adjustment of
Breakdown Voltage (Trim Range = ± 1.0V Typical)
5
www.national.com
LM136-5.0/LM236-5.0/LM336-5.0
Typical Applications
Precision Power Regulator with Low Temperature Coefficient
00571611
* Adjust for 6.25V across R1
5V Crowbar
00571612
Adjustable Shunt Regulator
00571613
www.national.com
6
LM136-5.0/LM236-5.0/LM336-5.0
Typical Applications
(Continued)
Linear Ohmmeter
00571614
Op Amp with Output Clamped
00571624
7
www.national.com
LM136-5.0/LM236-5.0/LM336-5.0
Typical Applications
(Continued)
Bipolar Output Reference
00571625
5.0V Square Wave Calibrator
00571626
10V Buffered Reference
00571627
www.national.com
8
LM136-5.0/LM236-5.0/LM336-5.0
Typical Applications
(Continued)
Low Noise Buffered Reference
00571628
Wide Input Range Reference
00571629
9
www.national.com
LM136-5.0/LM236-5.0/LM336-5.0
Schematic Diagram
00571616
www.national.com
10
LM136-5.0/LM236-5.0/LM336-5.0
Physical Dimensions
inches (millimeters)
unless otherwise noted
TO-46 Metal Can Package (H)
Order Number LM136H-5.0, LM136H-5.0/883, LM236H-5.0,
LM136AH-5.0, LM136AH-5.0/883 or LM236AH-5.0
NS Package Number H03H
Small Outline (SO-8) Package
Order Number LM336M-5.0 or LM336BM-5.0
NS Package Number M08A
11
www.national.com
LM136-5.0/LM236-5.0/LM336-5.0 5.0V Reference Diode
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
Plastic Package (Z)
Order Number LM336Z-5.0 or LM336BZ-5.0
NS Package Number Z03A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Americas Customer
Support Center
Email: [email protected]
Tel: 1-800-272-9959
www.national.com
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Support Center
Email: [email protected]
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Email: [email protected]
Tel: 81-3-5639-7560
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Similar pages