Revised February 2005 NC7SZ02 TinyLogic£ UHS 2-Input NOR Gate General Description Features The NC7SZ02 is a single 2-Input NOR Gate from Fairchild's Ultra High Speed Series of TinyLogic£. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. ■ Space saving SOT23 or SC70 5-lead package ■ Ultra small MicroPak¥ Pb-Free leadless package ■ Ultra High Speed: tPD 2.4 ns typ into 50 pF at 5V VCC ■ High Output Drive: r24 mA at 3V VCC ■ Broad VCC Operating Range: 1.65V–5.5V ■ Matches the performance of LCX when operated at 3.3V VCC ■ Power down high impedance inputs/output ■ Overvoltage tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented Ordering Code: Order Package Product Code Number Number Top Mark Package Description NC7SZ02M5X MA05B 7Z02 5-Lead SOT23, JEDEC MO-178, 1.6mm NC7SZ02M5X_NL (Note 1) MA05B 7Z02 Pb-Free 5-Lead SOT23, JEDEC MO-178, 1.6mm Supplied As 3k Units on Tape and Reel NC7SZ02P5X MAA05A Z02 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7SZ02P5X_NL (Note 1) MAA05A Z02 Pb-Free 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7SZ02L6X MAC06A JJ Pb-Free 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. Note 1: “_NL” indicates Pb-Free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only. TinyLogic£ is a registered trademark of Fairchild Semiconductor Corporation. MicroPak¥ is a trademark of Fairchild Semiconductor Corporation. © 2005 Fairchild Semiconductor Corporation DS012167 www.fairchildsemi.com NC7SZ02 TinyLogic£ UHS 2-Input NOR Gate October 1996 NC7SZ02 Logic Symbol Connection Diagrams IEEE/IEC Pin Assignments for SC70 and SOT23 Pin Descriptions Pin Names Description A, B Inputs Y Output NC No Connect (Top View) Pad Assignments for MircoPak Function Table Y A+B Inputs H Output A B Y L L H L H L H L L H H HIGH Logic Level www.fairchildsemi.com (Top Thru View) L L LOW Logic Level 2 Recommended Operating Conditions (Note 3) 0.5V to 6V 0.5V to 6V 0.5V to 6V Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) Supply Voltage Operating (VCC) DC Input Diode Current (IIK) 1.5V to 5.5V Input Voltage (VIN) @ VIN 0.5V 50 mA 20 mA @ VIN ! 6V 0V to 5.5V Output Voltage (VOUT) 0V to VCC 40qC to 85qC Operating Temperature (TA) DC Output Diode Current (IOK) Input Rise and Fall Time (tr, tf) @ VOUT 0.5V @ VOUT ! 6V, VCC 1.65V to 5.5V Supply Voltage Data Retention (VCC) GND DC Output Current (IOUT) DC VCC/GND Current (ICC/IGND) Storage Temperature (TSTG) Junction Temperature under Bias (TJ) 50 mA 20 mA r 50 mA r 50 mA 65qC to 150qC 150qC VCC @ 1.8V, 2.5V r0.2V 0 ns/V to 20 ns/V VCC @ 3.3V r 0.3V 0 ns/V to 10 ns/V VCC @ 5.0V r 0.5V 0 ns to 5 ns/V Thermal Resistance (TJA) SOT23-5 300qC/W SC70-5 425qC/W Junction Lead Temperature (TL); 260qC (Soldering, 10 seconds) Note 2: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Power Dissipation (PD) @ 85qC SOT23-5 200 mW SC70-5 150 mW Note 3: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage VCC (V) LOW Level Input Voltage VOH HIGH Level Output Voltage 25qC Typ LOW Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current 40qC to 85qC Min Max 0.75 VCC 0.7 VCC 0.25 VCC 0.25 VCC 0.3 VCC 0.3 VCC 1.65 1.55 1.65 1.55 1.8 1.7 1.8 1.7 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 Units Conditions V 0.7 VCC 1.65 to 1.95 2.3 to 5.5 VOL TA Max 1.65 to 1.95 0.75 VCC 2.3 to 5.5 VIL TA Min V V VIN VIL IOH 100 PA 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 IOH 4 mA 2.3 1.9 2.15 1.9 IOH 8 mA 3.0 2.4 2.80 2.4 3.0 2.3 2.68 2.3 4.5 3.8 4.20 3.8 IOH 16 mA V IOH 24 mA IOH 32 mA 1.65 0.0 0.1 0.1 1.8 0.0 0.1 0.1 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 V VIN VIH IOL 100 PA 4.5 0.0 0.1 0.1 1.65 0.08 0.24 0.08 IOL 4 mA 2.3 0.10 0.3 0.3 IOL 8 mA 3.0 0.15 0.4 0.4 3.0 0.22 0.55 0.55 4.5 0.22 0.55 0.55 r1 r10 PA VIN 0.0 1 10 PA VIN or VOUT 1.65 to 5.5 2.0 20 PA VIN 0 to 5.5 3 V IOL 16 mA IOL 24 mA IOL 32 mA 5.5V, GND 5.5V 5.5V, GND www.fairchildsemi.com NC7SZ02 Absolute Maximum Ratings(Note 2) NC7SZ02 AC Electrical Characteristics Symbol tPLH, Parameter Propagation Delay tPHL tPLH, Propagation Delay tPHL VCC TA 25qC TA 40qC to 85qC (V) Min Typ Max Min Max 1.65 2.0 5.3 11.5 2.0 12.0 1.8 2.0 4.4 9.5 2.0 10 2.5 r 0.2 0.8 2.9 6.5 0.8 7.0 3.3 r 0.3 0.5 2.3 4.5 0.5 4.7 5.0 r 0.5 0.5 1.9 3.9 0.5 4.1 3.3 r 0.3 1.5 2.9 5.0 1.5 5.2 5.0 r 0.5 0.8 2.4 4.3 0.8 4.5 CIN Input Capacitance 0 4 CPD Power Dissipation 3.3 23 Capacitance 5.0 30 Units ns ns Conditions CL 15 pF, RL 1 M: CL 50 pF, RL 500: Figure Number Figures 1, 3 Figures 1, 3 pF pF (Note 4) Figure 2 Note 4: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD (CPD)(VCC)(fIN) (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR 1.0 MHz; tw 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input AC Waveform; tr PRR 10 MHz; Duty Cycle tf 1.8 ns; 50% FIGURE 2. ICCD Test Circuit www.fairchildsemi.com 4 TAPE FORMAT for SC70 and SOT23 Package Tape Designator M5X, P5X Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm DIM A DIM B 0.093 0.096 (2.35) (2.45) 0.130 0.130 (3.3) (3.3) DIM F DIM Ko 0.138 r 0.004 0.053 r 0.004 (3.5 r 0.10) (1.35 r 0.10) 0.138 r 0.002 0.055 r 0.004 (3.5 r 0.05) 5 (1.4 r 0.11) DIM P1 DIM W 0.157 0.315 r 0.004 (4) (8 r 0.1) 0.157 0.315 r 0.012 (4) (8 r 0.3) www.fairchildsemi.com NC7SZ02 Tape and Reel Specification NC7SZ02 Tape and Reel Specification TAPE FORMAT for MicroPak Package (Continued) Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Designator L6X Cover Tape Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 0.059/0.000 0.567 W1 0.078/0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 1.50/0.00) (14.40) (W1 2.00/1.00) www.fairchildsemi.com 6 NC7SZ02 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B 7 www.fairchildsemi.com NC7SZ02 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A www.fairchildsemi.com 8 NC7SZ02 TinyLogic£ UHS 2-Input NOR Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 9 www.fairchildsemi.com