D TYPE CONNECTOR HOODS ETHERNET AND THINNERNET HOODS 18 For use with Transceiver Cables Zinc Diecast Shell for top and side Cable Entry 47.7 Easy Assembly ø11.71 Three options available IEEE Approved 16.3 39.4 18 Assembly Instructions 1. 2. 3. 4. 5. Select the tightest fitting insert that will fit over the cable. Fold braid/foil back over insert as shown in diagram. Ensure any excess is trimmed or folded back under lip of insertion Install jackscrews (if required). 47.7 and close cover. Install connector Install Slidelock clip/Slidelock studs (if required) See Page 43. OUTLINE DRAWING SECTION 11 18 16.3 39.2 38.2 47.7 16.3 39.2 16.3 39.2 Thin Ethernet DBCDEH1 18 Thick and Thin Ethernet DBCDEH2 ø11.71 47.7 18 16.3 39.4 Thick and Thin Ethernet - 90° DBCDEH3 DBC D EH1 Dubilier Connectors D Style EH1 - Thin Ethernet EH2 - Thick and Thin Ethernet EH3 - Thick and Thin Ethernet 90° 38.2 ø11.71 47.7 ORDERING INFORMATION Fax: 01371 875075 39.4 16.3 278 www.dubilier.co.uk Tel: 01371 875758