RCD MCF25Z-105JB Commercial 1/10 to 1/2 watt carbon film melf resistor Datasheet

COMMERCIAL 1/10 to 1/2 WATT
CARBON FILM MELF RESISTORS
MCF SERIES
RoHS
RESISTORSCAPACITORSCOILSDELAY LINES
Term.W is
RoHS
compliant
& 260°C
compatible
Economy-grade pricing!
Wide resistance range (up to 22MegΩ available)
Standard tolerance: ±5% (±2% available)
Series ZCF zero-ohm jumpers available, .02Ω maximum.
Type ZCF10 is rated at 2A, ZCF12, 3A, and ZCF25 at 5A.
ZCF Series marked with a single black band.
Low cost, carbon film MELF’s! Pulse voltage to 3KV!
Quality levels are unsurpassed due to stringent process controls.
Automated Far East production results in low prices. RCD offers
the industry’s widest range of sizes and options including zero
ohm jumpers and high pulse voltage versions.
L
OPTIONS
Option Z - high pulse voltage to 3KV
Option 37 - Group A screening per Mil-R-39008
Inch [mm]
t
SPECIFICATIONS
Series MCF Voltage Rating
RCD
Type
Wattage
at 70°C Voltage
Rating 1
MCF10
MCF12
MCF22
MCF25
MCF25S
.10
.125
.25
.25
.50
D
W
100V
200V
250V
250V
250V
Max.
Pulse
Voltage2
200V
400V
400V
600V
600V
Series MCFZ Voltage Rating
Resis.
R an g e 3
Voltage
Rating 1
1Ω - 1MΩ
1Ω - 1MΩ
1Ω - 1MΩ
1Ω - 2.2MΩ
1Ω - 2.2MΩ
n/a
250V
n/a
300V
n/a
Max.
Pulse
Voltage2
n/a
2K V
n/a
3K V
n/a
L ±.008
[.2]
Resis.
R an g e 3
1KΩ - 1MΩ
1KΩ - 1MΩ
1KΩ - 1MΩ
1KΩ - 2.2M
1KΩ - 2.2M
.079
.135
.135
.232
.232
D ±.008
[.2]
[2.0]
[3.4]
[3.4]
[5.9]
[5.9]
.044
.057
.057
.085
.085
W (Min.) t (Max.)
[1.12]
[1.45]
[1.45]
[2.15]
[2.15]
.012
.012
.012
.020
.020
[.3]
[.3]
[.3]
[.5]
[.5]
.006 [.15]
.006 [.15]
.006 [.15]
.008 [.2]
.008 [.2]
Maximum working voltage determined by E = √PR , E should not exceed value listed in column above. Dielectric strength is rated the same as the maximum working voltage.
Peak pulse voltage is highly dependent on pulse waveform and resistance value. Voltage levels given indicate maximum levels for the series. These levels are not attainable for all values and pulse
waveforms. Consult factory for application assistance.
3
Consult factory for resistance values outside of standard range (0.1Ω to 22 Meg available).
1
2
TEMPERATURE COEFFICIENT (Typ.)
TEMP. COEFFICIENT
(ppm/°c)
DERATING
100
80
60
-1000
-750
-500
-250
0
10
40
100
1K
10K
100K
1M
NOMINAL RESISTANCE (Ohms)
10M
20
CURRENT NOISE (Typ.)
0
25
50
75
100
125
150
175
155°C
200
AMBIENT TEMPERATURE (°C)
PERFORMANCE CHARACTERISTICS
Operating Temperature Range
-55 to +155°C
Solderability (5 sec. @ 230°C)
95% coverage
Insulation Resistance (Dry)
10,000 MegΩ
Short-Time Overload (5 sec. @ 2.5x power
not to exceed 2x voltage rating)
0.5%* + .05Ω
Resistance to Solder Heat (260°C, 5 sec.)
0.5% + .05Ω
Temperature Cycling (-50°C + 120°C)
1.0% + .05Ω
Moisture Resis. (MIL-Std-202, Method 106)
5.0% + .05Ω
Load Life (1000 hours rated power)
2.5%* + .05Ω
+20
NOISE INDEX
(db)
% OF RATED POWER
120
0
-20
-40
-60
10
100
1K
10K
100K
1M
10M
NOMINAL RESISTANCE (Ohms)
P/N DESIGNATION:
MCF25
- 102 - J T W
RCD Type
Options: Z, 37 (leave blank if standard)
3-Digit Resis. Code: 2 signif. digits & multiplier
1R0=1Ω, 100=10Ω, 101=100Ω, 102=1KΩ,
103=10K,104=100K, 105=1M, 106=10M, etc.
Tolerance: J = 5% (standard), K =10%, G =2%
Packaging: B = Bulk, T = Tape & Reel
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either
is acceptable, in which case RCD will select based on lowest
price and quickest delivery
* Multiply by 2 for MCF22 and MCF25S Series.
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA090A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
21
Similar pages