Model No. OSPR4X01XXZ3E1C1E REV. C1 4PCS Xeon 1 Power LED Descriptions: • • • 1 Green light source, fast response Long life, easy installation LED model number: XXZ3E1C1E Features: • • • • • 1 Available in white Super Bright Big Emitting Angle Superior ESD Protection Superior UV Resistance Application: • • 1 Small space lighting Mechanical equipment lights Product Picture and Dimensions: -- -- Unit: mm Tolerance:+0.3mm 1 Model No. OSPR4X01XXZ3E1C1E REV. C1 Device Selection Guide Module No. M5Z3E1C1E W4Z3E1C1E Color Warm White Pure White 1 Wavelength (Typ.) Overall luminous flux X=0.45,Y=0.41 340lm X=0.31,Y=0.33 360lm Absolute Maximum Ratings(Ta=25℃) 1 Items Symbol Values Units Operating supply range(DC) Vidc 11.4 V Input Current (DC) Ii 600 mA Power Dissipation Pa 6.8 W Operating Temperature Tope -10 ~ +40 DegC Storage Temperature Tstg -20 ~ +80 DegC Typical Performance (Ta=25℃) 1 Items Symbol Min. Typ. Max. Units LED Module Power Pm - 4.8 6.8 w Input Voltage(DC) Vi - 10 11.4 V Product Input Current If - 480 600 mA Beam Pattern BP - 120 - Deg Total Diameter of PCB Lmod. - 28 - mm Net Weight Wei. --- 6 --- g 2 Model No. OSPR4X01XXZ3E1C1E REV. C1 Product circuit V SS- VDD+ Product handling ● Please do not use a force of over 3kgf impact or pressure on the silicone lens, otherwise it will cause a catastrophic failure. ● The LEDs should only be picked up by making contact with the sides of the LED body. ● Avoid touching the silicone lens especially by sharp tools such as Tweezers. ● Avoid leaving fingerprints on the silicone lens. ● Please store the LEDs away from dusty areas or seal the product against dust. ● When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the silicone lens must be prevented. ● Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc) 3