ON MCH6203-TL-E Bipolar transistor Datasheet

Ordering number : EN6611B
MCH6103/MCH6203
Bipolar Transistor
http://onsemi.com
(–)50V, (–)1A, Low VCE(sat), (PNP)NPN Single MCPH6
Applicaitons
•
Relay drivers, lamp drivers, motor drivers, flash
Features
•
•
•
•
• Large current capacity
Adoption of MBIT processes
• High-speed switching
Low collector-to-emitter saturation voltage
Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm)
High allowable power dissipation
Specifications (
) : MCH6103
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Conditions
Ratings
Unit
VCBO
VCES
(--50)80
V
(--50)80
V
VCEO
(--)50
V
VEBO
(--)5
V
Continued on next page.
Package Dimensions
Product & Package Information
unit : mm (typ)
7022A-007
• Package
: MCPH6
• JEITA, JEDEC
: SC-88, SC-70-6, SOT-363
• Minimum Packing Quantity : 3,000 pcs./reel
6
5
4
0 to 0.02
1
2
3
0.65
TL
0.3
Marking
0.85
0.25
Packing Type: TL
4
MCPH6
AC
MCH6103
CC
MCH6203
Electrical Connection
1, 2, 5, 6
3
1, 2, 5, 6
3
4
MCH6103
Semiconductor Components Industries, LLC, 2013
September, 2013
LOT No.
5
3
LOT No.
6
2
LOT No.
1
1 : Collector
2 : Collector
3 : Base
4 : Emitter
5 : Collector
6 : Collector
LOT No.
0.07
MCH6103-TL-E
MCH6203-TL-E
0.15
2.1
1.6
0.25
2.0
4
MCH6203
80812 TKIM/D1004 TSIM TB-00000351/N2000TS (KOTO) TA-2974 No.6611-1/8
MCH6103/MCH6203
Continued from preceding page.
Parameter
Symbol
Collector Current
Conditions
Ratings
Unit
IC
ICP
(--)1.0
(--)3
A
200
mA
Collector Dissipation
IB
PC
Junction Temperature
Tj
Storage Temperature
Tstg
Collector Current (Pulse)
Base Current
When mounted on ceramic substrate (600mm2×0.8mm)
A
1.0
W
150
°C
--55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Collector Cutoff Current
ICBO
IEBO
hFE
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
Emitter-to-Base Breakdown Voltage
Turn-On Time
Storage Time
Fall Time
Ratings
min
typ
VCB=(--)40V, IE=0A
VEB=(--)4V, IC=0A
VCE=(--)2V, IC=(--)100mA
fT
Cob
Output Capacitance
Conditions
VCE(sat)1
VCE(sat)2
200
Unit
(--)0.1
μA
(--)0.1
μA
560
VCE=(--)10V, IC=(--)300mA
420
VCB=(--)10V, f=1MHz
IC=(--)500mA, IB=(--)10mA
(9)6
IC=(--)300mA, IB=(--)6mA
IC=(--)500mA, IB=(--)10mA
max
MHz
pF
(--280)130
(--430)190
mV
(--145)90
(--220)135
mV
(--)0.81
(--)1.2
VBE(sat)
V(BR)CBO
IC=(--)10μA, IE=0A
(--50)80
V
V
V(BR)CES
IC=(--)100μA, RBE=0Ω
(--50)80
V
V(BR)CEO
IC=(--)1mA, RBE=∞
(--)50
V
V(BR)EBO
ton
IE=(--)10μA, IC=0A
(--)5
tstg
tf
See specified Test Circuit.
V
(36)38
ns
(173)332
ns
(28)40
ns
Switching Time Test Circuit
IB1
PW=20μs
D.C.≤1%
INPUT
OUTPUT
IB2
VR
RB
RL
50Ω
50Ω
+
100μF
VBE= --5V
+
470μF
VCC=25V
IC=20IB1= --20IB2=500mA
For PNP, the polarity is reversed.
Ordering Information
Package
Shipping
MCH6103-TL-E
Device
MCPH6
3,000pcs./reel
MCH6203-TL-E
MCPH6
3,000pcs./reel
memo
Pb Free
No.6611-2/8
MCH6103/MCH6203
IC -- VCE
MCH6103
0
--4
mA
mA
--20
30mA
40mA
--8m
A
0.8
A
--10m
A
--6m
--0.6
--4mA
--2mA
--0.4
--1mA
--0.2
0
--200
--400
--600
--800
1mA
0.2
600
800
1000
IT01891
IC -- VBE
1.0
MCH6203
VCE=2V
0.9
Collector Current, IC -- A
0.8
--0.3
--0.2
0.5
0.4
0.3
0.2
--25°C
--0.4
25°C
--25°C
--0.5
0.6
C
--0.6
0.7
25°C
--0.7
Ta=75°
C
Collector Current, IC -- A
400
Collector-to-Emitter Voltage, VCE -- mV
--0.1
0.1
0
0
0
--0.2
--0.4
--0.6
--0.8
--1.0
Base-to-Emitter Voltage, VBE -- V
0
5
--25°C
2
7
100
7
5
7
5
2
7 --0.1
2
3
5
Collector Current, IC -- A
--1.0
IT01894
VCE(sat) -- IC
--1000
7
5
3
2
--100
7
75°C
Ta=
°C
--25
3
25°C
2
--10
--0.01
2
3
5
7
--0.1
2
2
3
3
Collector Current, IC -- A
5
7
--1.0
IT01896
5
7
2
0.1
3
5
Collector Current, IC -- A
7 1.0
IT01895
VCE(sat) -- IC
1000
MCH6103
IC / IB=20
5
10
0.01
7
MCH6203
IC / IB=20
7
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
5
MCH6203
VCE=2V
25°C
100
3
3
1.0
IT01893
2
2
2
0.8
--25°C
3
3
10
--0.01
Ta=75°C
5
DC Current Gain, hFE
3
0.6
hFE -- IC
1000
25°C
Ta=75°C
0.4
Base-to-Emitter Voltage, VBE -- V
MCH6103
VCE= --2V
7
0.2
IT01892
hFE -- IC
1000
DC Current Gain, hFE
200
IT01890
--0.8
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
IB=0
0
0
MCH6103
VCE= --2V
--0.9
4mA
2mA
IC -- VBE
--1.0
6mA
0.4
--1000
Collector-to-Emitter Voltage, VCE -- mV
8mA
0.6
IB=0
0
10mA
20mA
Ta=75
°
Collector Current, IC -- A
MCH6203
--3
--0.8
IC -- VCE
1.0
0mA
Collector Current, IC -- A
--1.0
5
3
2
100
7
5°C
5
7
Ta=
3
5
--2
°C
25°C
2
10
0.01
2
3
5
7
0.1
2
3
Collector Current, IC -- A
5
7 1.0
IT01897
No.6611-3/8
MCH6103/MCH6203
VCE(sat) -- IC
3
2
--1000
7
5
5°C
Ta=7
C
--25°
--100
7
5
25°C
3
2
2
--0.01
3
5
7
2
--0.1
3
5
Collector Current, IC -- A
100
7
5
5°C
Ta=7
C
--25°
3
25°C
5
3
2
Ta= --25°C
7
75°C
25°C
3
2
--100
--0.01
2
3
5
7
2
--0.1
3
5
Collector Current, IC -- A
--1.0
IT01900
7
2
0.1
3
5
3
2
1000
Ta= --25°C
7
5
75°C
25°C
3
2
2
3
5
7
2
0.1
3
Output Capacitance, Cob -- pF
7
5
3
2
10
7
5
5
3
7 1.0
IT01901
Cob -- VCB
MCH6203
f=1MHz
3
100
7 1.0
IT01899
MCH6203
IC / IB=50
7
5
2
5
Collector Current, IC -- A
MCH6103
f=1MHz
3
5
VBE(sat) -- IC
100
0.01
7
Cob -- VCB
5
3
10000
7
5
2
Collector Current, IC -- A
Base-to-Emitter
Saturation Voltage, VBE(sat) -- mV
Base-to-Emitter
Saturation Voltage, VBE(sat) -- mV
--1.0
IT01898
MCH6103
IC / IB=50
--1000
Output Capacitance, Cob -- pF
3
2
10
0.01
7
VBE(sat) -- IC
--10000
2
100
7
5
3
2
10
7
5
3
2
3
5
7 --1.0
2
3
5
7 --10
2
Collector-to-Base Voltage, VCB -- V
3
2
0.1
5
5
3
2
100
2
3
5
7
--0.1
2
3
Collector Current, IC -- A
3
5
7
--1.0
IT01904
5
7 1.0
2
3
5
7 10
2
Collector-to-Base Voltage, VCB -- V
3
5
IT01903
f T -- IC
1000
Gain-Bandwidth Product, f T -- MHz
MCH6103
VCE= --10V
7
2
IT01902
f T -- IC
1000
Gain-Bandwidth Product, f T -- MHz
3
2
2
--10
--0.01
MCH6203
IC / IB=50
1000
7
5
3
2
2
--0.1
VCE(sat) -- IC
10000
7
5
MCH6103
IC / IB=50
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
--10000
7
5
MCH6203
VCE=10V
7
5
3
2
100
0.01
2
3
5
7
0.1
2
3
Collector Current, IC -- A
5
7 1.0
IT01905
No.6611-4/8
MCH6103/MCH6203
ASO
3
MCH6103 / MCH6203
50
0μ
s
10
m
10
s
0m
s
1ms
DC
op
er
ati
on
ICP=3A
s
Collector Current, IC -- A
IC=1A
0μ
1.0
10
2
7
5
3
2
0.1
7
5
3
2
Ta=25°C
Single pulse
For PNP, minus sign is omitted.
Mounted on a ceramic board (600mm2✕0.8mm)
0.01
0.1
2
3
5 7 1.0
2
3
5 7 10
2
3
Collector-to-Emitter Voltage, VCE -- V
PC -- Ta
1.4
MCH6103 / MCH6203
1.2
Collector Dissipation, PC -- W
5
M
1.0
ou
nte
do
na
0.8
ce
ram
ic
0.6
bo
ard
(6
00
mm
0.4
2
✕0
0.2
.8m
m)
0
5 7 100
IT01906
0
20
40
60
80
100
120
Ambient Temperature, Ta -- °C
140
160
IT01907
No.6611-5/8
MCH6103/MCH6203
Embossed Taping Specification
MCH6103-TL-E, MCH6203-TL-E
No.6611-6/8
MCH6103/MCH6203
Outline Drawing
MCH6103-TL-E, MCH6203-TL-E
Land Pattern Example
Mass (g) Unit
0.008 mm
* For reference
Unit: mm
2.1
0.6
0.4
0.65 0.65
No.6611-7/8
MCH6103/MCH6203
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.6611-8/8
Similar pages