DATA SHEET THICK FILM CHIP RESISTORS Automotive Precision grade AC series 0.1%, 0.5%, 1%, TC 50 sizes 0402/0603/0805/1206 Product specification – March 14, 2016 V.0 RoHS compliant & Halogen Free Product specification Chip Resistor Surface Mount AC 7 SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes AC0402 to AC1206 ultra precision chip resistors with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL PART NUMBER ( PREFERRED ) APPLICATIONS All general purpose applications Car electronics Industrial applications FEATURES AEC-Q200 qualified Halogen Free Epoxy RoHS compliant Reducing environmentally hazardous wastes High component and equipment reliability Non-forbidden material used in products/production Moisture sensitivity level: MSL 1 2 0402 to 1206 SERIES AC XXXX X X X XX XXXX L (1) (2) (3) (4) (5) (6) (7) (1) SIZE 0402 / 0603 / 0805 / 1206 (2) TOLERANCE B = ± 0.1% D = ± 0.5% F = ± 1% (3) PACKAGING TYPE R = Paper/PE taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE E = ± 50 ppm/°C (5) TAPING REEL 07 = 7 inch dia. Reel 13 = 13 inch dia. Reel (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of “Resistance rule of global part number”. (7) DEFAULT CODE Letter L is system default code for order only (Note) Resistance rule of global part number Resistance code rule Example O RDERING EXAMPLE The ordering code of a AC0603 XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω chip resistor, TC 50 value 56Ω with ±0.5% tolerance, supplied in 7-inch tape reel is: AC0603DRE0756RL. XXXR (100 to 976 Ω) 100R = 100 Ω NOTE XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 MΩ) 1M = 1,000,000 Ω 1. All our R-Chip products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed www.yageo.com Mar. 14, 2016 V.0 Product specification Chip Resistor Surface Mount AC SERIES 3 7 0402 to 1206 MARKING AC0805 / AC1206 Either resistance in E-24 or E-96: 4 digits Fig. 1 Value = 10 kΩ First three digits for significant figure and 4th digit for number of zeros AC0603 E-24 series: 3 digits Fig. 2 Value = 12 kΩ First two digits for significant figure and 3rd digit for number of zeros E-96 series: 3 digits for 0603± 1% EIA-96 marking method Fig. 3 Value = 12.4 kΩ AC0402 No marking Fig. 4 For further marking information, please see special data sheet “Chip resistors marking”. CONSTRUCTION The resistors are constructed out of a high-grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive layer. The resistive layer is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 5. OUTLINES For dimension see Table 1 DIMENSION Table 1 For outlines see fig. 5 TYPE L (mm) W (mm) H (mm) AC0402 1.00 ± 0.05 0.50 ± 0.05 0.32 ± 0.05 AC0603 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 AC0805 2.00 ± 0.10 1.25 ± 0.10 0.50 ± 0.10 AC1206 3.10 ± 0.10 1.60 ± 0.10 0.55 ± 0.10 I1 (mm) I2 (mm) 0.20 ± 0.10 0.25 ± 0.10 0.25 ± 0.15 0.25 ± 0.15 0.35 ± 0.20 0.35 ± 0.20 0.45 ± 0.20 0.40 ± 0.20 Fig. 5 Chip resistor outlines www.yageo.com Mar. 14, 2016 V.0 Product specification Chip Resistor Surface Mount AC SERIES 4 7 0402 to 1206 ELECTRICAL CHARACTERISTICS Table 2 TYPE RESISTANCE RANGE (E24/E96) OPERATING TEMPERATURE RANGE MAXIMUM WORKING RATING VOLTAGE DIELECTRIC WITHSTAND VOLTAGE MAXIMUM OVERLOAD VOLTAGE 50 V 100 V 100 V ± 50 ppm/°C POWER TEMPERATURE COEFFICIENT OF RESISTANCE AC0402 10 Ω to 1 MΩ –55 °C to +155 °C 1/16 W AC0603 10 Ω to 1 MΩ –55 °C to +155 °C 1/10 W 75 V 150 V 150 V ± 50 ppm/°C AC0805 10 Ω to 1 MΩ –55 °C to +155 °C 1/8 W 150 V 300 V 300 V ± 50 ppm/°C AC1206 10 Ω to 1 MΩ –55 °C to +155 °C 1/4 W 200 V 500 V 400 V ± 50 ppm/°C NOTE The maximum working voltage that may be continuously applied to the resistor element, see “IEC publication 60115-8” FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE REEL DIMENSION Paper/PE taping reel (R) AC0402 AC0603 AC0805 AC1206 7" (178 mm) 10,000 5,000 5,000 5,000 13" (330 mm) 50,000 20,000 20,000 20,000 NOTE 1. For Paper/PE tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing” FUNCTIONAL DESCRIPTION POWER RATING Each type rated power at 70°C: AC0402=1/16W, AC0603=1/10W, AC0805=1/8 W, AC1206=1/4W R ATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=√(P X R) or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (V) Fig. 6 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (T amb) P=Rated power (W) R=Resistance value (Ω) www.yageo.com Mar. 14, 2016 V.0 Product specification Chip Resistor Surface Mount AC SERIES 5 7 0402 to 1206 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS High Temperature Exposure AEC-Q200 Test 3 1,000 hours at TA = 155 °C, unpowered ± (1.0%+0.05Ω) Moisture Resistance AEC-Q200 Test 6 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d. with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered ± (0.5%+0.05Ω) MIL-STD-202 Method 108 MIL-STD-202 Method 106 Parts mounted on test-boards, without condensation on parts Biased Humidity AEC-Q200 Test 7 MIL-STD-202 Method 103 1,000 hours; 85 °C / 85% RH 10% of operating power ± (1.0%+0.05Ω) Measurement at 24± 4 hours after test conclusion. Operational Life Resistance to Soldering Heat AEC-Q200 Test 8 ± (1.0%+0.05Ω) MIL-STD-202 Method 108 1,000 hours at 125 °C, derated voltage applied for 1.5 hours on, 0.5 hour off, still-air required AEC-Q200 Test 15 Condition B, no pre-heat of samples ± (0.5%+0.05Ω) MIL-STD-202 Method 210 Lead-free solder, 260± 5 °C, 10± 1 seconds immersion time No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol Thermal Shock AEC-Q200 Test 16 -55/+125 °C MIL-STD-202 Method 107 Number of cycles is 300. Devices mounted ± (0.5%+0.05Ω) Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ESD AEC-Q200 Test 17 Human Body Model, AEC-Q200-002 1 pos. + 1 neg. discharges ± (3.0%+0.05 Ω) 0402/0603: 1KV 0805 and above: 2KV www.yageo.com Mar. 14, 2016 V.0 Product specification Chip Resistor Surface Mount TEST Solderability - Wetting AC SERIES 6 7 0402 to 1206 TEST METHOD PROCEDURE REQUIREMENTS AEC-Q200 Test 18 Electrical Test not required Magnification 50X Well tinned (≥95% covered) J-STD-002 SMD conditions: No visible damage (a) Method B, aging 4 hours at 155 °C dry heat, dipping at 235± 3 °C for 5± 0.5 seconds. (b) Method B, steam aging 8 hours, dipping at 215± 3 °C for 5± 0.5 seconds. (c) Method D, steam aging 8 hours, dipping at 260± 3 °C for 30± 0.5 seconds. Board Flex AEC-Q200 Test 21 AEC-Q200-005 Chips mounted on a 90mm glass epoxy resin PCB (FR4) ± (1.0%+0.05Ω) Bending for 0402: 5 mm 0603/0805: 3 mm 1206 and above: 2 mm Holding time: minimum 60 seconds Temperature Coefficient of Resistance (T.C.R.) MIL-STD-202 Method 304 At +25/–55 °C and +25/+125 °C Refer to table 2 Formula: T.C.R= R2 - R1 × 106 (ppm/°C) R1(t2 - t1) Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Short Time Overload IEC60115-1 4.13 2.5 times of rated voltage or maximum overload voltage whichever is less for 5 sec at room temperature ± (1.0%+0.05Ω) FOS ASTM-B-809-95 Sulfur (saturated vapor) 500 hours, 60± 2℃, ± ( 1.0%+0.05Ω) unpowered www.yageo.com Mar. 14, 2016 V.0 Product specification Chip Resistor Surface Mount AC SERIES 0402 to 1206 7 7 REVISION HISTORY REVISION DATE Version 0 CHANGE NOTIFICATION Feb. 23, 2016 - DESCRIPTION - New datasheet for Automotive thick film ultra precision chip resistors sizes of 0402/0603/0805/1206, 0.1%, 0.5%, 1%, TC50 with lead-free terminations “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” www.yageo.com Mar. 14, 2016 V.0