SBR05U20LP NEW PRODUCT 0.5A SBR® SURFACE MOUNT SUPER BARRIER RECTIFIER Features Mechanical Data • • • • • • • • • • Ultra Low Forward Voltage Drop Superior Reverse Avalanche Capability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 150ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) “Green” Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability • • • • Case: DFN1006-2 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminal Connections: Cathode Dot Terminals: Finish - NiPdAu over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.001 grams Bottom View Top View Ordering Information (Note 2) Part Number SBR05U20LP-7 SBR05U20LP-7B Notes: Case DFN1006-2 DFN1006-2 Packaging 3,000/Tape & Reel 10,000/Tape & Reel 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes 2. For packaging details, go to our website at http://www.diodes.com. Marking Information 52 = Product Type Marking Code -7: Dot Denotes Cathode Side -7B: Bar Denotes Cathode Side SBR is a registered trademark of Diodes Incorporated. SBR05U20LP Document number: DS31001 Rev. 5 - 2 1 of 4 www.diodes.com January 2011 © Diodes Incorporated SBR05U20LP Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM VR(RMS) IO Value Unit 20 V 14 500 V mA IFSM 5 A Symbol TJ, TSTG Value -65 to +150 Unit ºC Thermal Characteristics Characteristic Operating and Storage Temperature Range Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Reverse Breakdown Voltage (Note 3) Symbol V(BR)R Forward Voltage Drop VF Leakage Current (Note 3) IR Notes: Min 20 - Typ 0.34 0.25 0.39 0.31 0.47 0.43 6 1.5 - Max 0.38 0.28 0.43 0.34 0.50 0.46 50 5 Unit V Test Condition IR = 50µA IF = 0.1A, TJ = 25ºC IF = 0.1A, TJ = 150ºC IF = 0.2A, TJ = 25ºC IF = 0.2A, TJ = 150ºC IF = 0.5A, TJ = 25ºC IF = 0.5A, TJ = 150ºC VR = 20V, TJ = 25ºC VR = 20V, TJ = 150ºC V µA mA 3. Short duration pulse test used to minimize self-heating effect. 0.6 10,000 IF, INSTANTANEOUS FORWARD CURRENT (mA) PD, POWER DISSIPATION (W) NEW PRODUCT Maximum Ratings @TA = 25°C unless otherwise specified 0.5 0.4 0.3 0.2 0.1 0 0 1,000 0.2 0.4 0.6 0.8 1 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation TA = 150°C TA = 125°C 100 10 TA = 85°C TA = 25°C 1 TA = -55°C 0.1 0 0.2 0.4 0.6 0.8 1 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics SBR is a registered trademark of Diodes Incorporated. SBR05U20LP Document number: DS31001 Rev. 5 - 2 2 of 4 www.diodes.com January 2011 © Diodes Incorporated SBR05U20LP 200 TA = 150°C CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (uA) 1,000 TA = 125°C 100 TA = 75°C 10 TA = 25°C 1 0.1 f = 1.0MHz 160 120 80 40 TA = -65°C 0.01 0 0 5 10 15 20 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 0 0.60 0.50 0.40 0.30 0.20 0.10 5 10 15 VR, DC REVERSE VOLTAGE (V) 20 Fig. 4 Total Capacitance vs. Reverse Voltage TA, DERATED AMBIENT TEMPERATURE (°C) 0.70 IF(AV), AVERAGE FORWARD CURRENT (A) NEW PRODUCT 10,000 175 150 125 100 75 50 25 0 0.00 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve 175 0 2 4 6 8 10 12 14 16 18 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating 20 Package Outline Dimensions A DFN1006-2 Dim Min Max Typ A 0.47 0.53 0.50 A1 0 0.05 0.03 b 0.45 0.55 0.50 D 0.95 1.075 1.00 E 0.55 0.675 0.60 e 0.40 L 0.20 0.30 0.25 R 0.05 0.15 0.10 All Dimensions in mm A1 D R E b L e SBR is a registered trademark of Diodes Incorporated. SBR05U20LP Document number: DS31001 Rev. 5 - 2 3 of 4 www.diodes.com January 2011 © Diodes Incorporated SBR05U20LP Suggested Pad Layout NEW PRODUCT C Dimensions Z G X Y C X Y Value (in mm) 1.1 0.3 0.7 0.4 0.7 G Z IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com SBR is a registered trademark of Diodes Incorporated. SBR05U20LP Document number: DS31001 Rev. 5 - 2 4 of 4 www.diodes.com January 2011 © Diodes Incorporated