Ironwood GT-QFN-3011 Easily removable swivel socket lid Datasheet

Silver Button GT-QFN Socket - Direct mount, solderless
Features
A
• Directly mounts to target PCB (needs tooling holes) with hardware
• High speed, reliable Elastomer connection
• Minimum real estate required
• Compression plate distributes forces evenly
• Easily removable swivel socket lid
A
12.225
14.725
Recommended Torque
5.65 N-cm [0.5 lbf-in]
TOP VIEW
7.982
1.588
7.588
6.000
14.725
SECTION A-A
Description: GT-QFN 6x4mm QFN40F
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all
other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
GT-QFN-3011 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 7.53
STATUS: Released
SHEET: 1 OF 4
REV. A
ENG: J. Vavra
DRAWN BY: M. Raske
SCALE: 4:1
FILE: GT-QFN-3011 Dwg
DATE: 11/11/2015
12.225
SOCKET BASE
2.200
Orientation mark
2.000
9.725±0.050
1.400
D
0.85±0.05 (x2)
Non-plated alignment hole
Pin Placement
3.000
1.70±0.10 (x4)
Non-plated mounting hole
9.725±0.050
12.225±0.125
Socket base size
14.725±0.125
Backing plate size
Do NOT locate vias in these locations
DETAIL D
SCALE 12 : 1
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
GT-QFN-3011 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 7.53
STATUS: Released
SHEET: 2 OF 4
REV. A
ENG: J. Vavra
DRAWN BY: M. Raske
SCALE: 6:1
FILE: GT-QFN-3011 Dwg
DATE: 11/11/2015
IRONWOOD PACKAGE CODE: QFN40F
0.450
0.350
0.800
6.000
A1
4.700
4.400
0.250
0.150
2.700
4.000
2.800
0.400
Dimensions are in millimeters.
1.
2.
Interpret dimensions and tolerances per ASME Y14.5M-1994.
Parallelism measurement shall exclude any effect of mark on top surface of package.
Description: Compatible Device
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
GT-QFN-3011 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 7.53
STATUS: Released
SHEET: 3 OF 4
REV. A
ENG: J. Vavra
DRAWN BY: M. Raske
SCALE: 15:1
FILE: GT-QFN-3011 Dwg
DATE: 11/11/2015
ITEM NO.
DESCRIPTION
Material
1
Socket Base 7mm
7075-T6 (SN)
2
Socket Lid 7mm
7075-T6 Aluminum Alloy
3
Compression Screw M6x1
Stainless Steel (18-8)
4
Compression Plate 7mm IC,
1.5mm thick
7075-T6 (SN)
5
#0-80 X .375 LG, SOC HD CAP
SCREW, ALLOY STL, BLK
OXIDE
Alloy Steel
6
#0-80 Shoulder Screw, 1.59mm
thread length
Stainless Steel (303)
7
Insulation Plate 7mm
FR4 Standard
8
Backing Plate
7075-T6 Aluminum Alloy
9
Alignment Pin 1/32" dia. x 1/8"
lng
Chrome Stainless Steel
10
GT elastomer for 6x4mm
QFN40F
N/A
11
IC guide 6x4mm QFN40F
TECAPEEK CMF Ceramic filled
12
Test Chip 3.86x2.29mm QFN4C
FR4 High temp
13
Test PCB 3.86x2.29mm QFN4C
FR4 High temp
3
2
4
6
12
5
1
9
11
10
13
7
Backing plate and insulation plate detail
9.725
3.500
8
Description: Socket, Backing Plate Detail
3.000
GT-QFN-3011 Drawing
©2015 Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 7.53
1.588
14.725
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all
other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
STATUS: Released
6.000
SHEET: 4 OF 4
REV. A
ENG: J. Vavra
DRAWN BY: M. Raske
SCALE: 4.5:1
FILE: GT-QFN-3011 Dwg
DATE: 11/11/2015
Similar pages