iC-SD85 BLCC SD1C Infrared LED Rev B4, Page 1/6 FEATURES APPLICATIONS ♦ Emission peak at 850 nm matched to silicon detectors and opto ICs ♦ Narrow irradiance pattern ♦ High temperature range -40 to 125 ◦ C ♦ High switching speed ♦ Packages suitable for SMT mounting ♦ Illumination for high resolution optical encoder ♦ Modulated light barriers PACKAGE dra_sd1c1-tl85_z_pack_2, 2:1 BLCC SD1C DIMENSIONS 4.55 3.80 0.77 6 Soldermask Barrier 2.20 0.80 8 3.90 4.71 5.36 0.80 2.20 Soldermask Covered Area Metallized Edges (2x) Solderable Contacts (2x) Copyright © 2011, 2014 iC-Haus Solderable Contacts (2x) dra_sd1c1-tl85_z_pack_1, 5:1 http://www.ichaus.com iC-SD85 BLCC SD1C Infrared LED Rev B4, Page 2/6 PACKAGING INFORMATION PIN CONFIGURATION SD1C PIN FUNCTIONS No. Name Function 1 A 2 C 1 Anode Cathode 2 dra_sd1c1-tl85_z_pack_3, 5:1 ABSOLUTE MAXIMUM RATINGS Beyond these values damage may occur (Ta = 25◦ C, unless otherwise noted) Item No. Symbol Parameter Conditions Unit Min. G001 IF Forward current (DC) G002 IFSM Surge forward current G003 VR Reverse voltage G004 P Power dissipation tp ≤ 10µs Case temperature 25◦ C All voltages are referenced to ground unless otherwise stated. All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative. Max. 50 mA 1000 mA 5 V 150 mW iC-SD85 BLCC SD1C Infrared LED Rev B4, Page 3/6 THERMAL DATA Item No. Symbol Parameter Conditions Unit Min. Typ. Max. T01 Ta Operating Ambient Temperature Range -40 125 ◦C T02 T03 Ts Tpk Storage Temperature Range -40 125 ◦C 260 ◦C T04 Rthja Thermal Resistance Junction to Ambient Reflow Soldering Peak Temperature Convection reflow: tpk < 20 s, MSL 1 (unlimited floor live at 30 ◦ C and 60 % RH); Please refer to customer information file No. 7 for details. Not suitable for vapor phase soldering. 270 K/W ELECTRICAL CHARACTERISTICS Ta = 25 ◦ C, unless otherwise noted Item No. Symbol Parameter Conditions Unit Min. Typ. Max. 1.4 1.8 Electrical and Optical Characteristics 001 VF Forward Voltage IF = 20 mA 002 VR Reverse Voltage IR = 5 µA 003 Φe Radiant Power IF = 20 mA 004 TK(Φ e ) Temperature Coefficient of Radi- IF = 20 mA, Tj = 25 ◦ C...125 ◦ C ant Power 005 λp Peak Wavelength IF = 20 mA 006 ∆λ Spectral Half Width IF = 20 mA 30 nm 007 2φ Divergence IF = 20 mA 8 deg. 008 tr, tf Switching Time IF = 50 mA, RL = 50 Ω 12 ns 5 1.4 830 V V 2.7 mW -0.6 %/K 850 870 nm iC-SD85 BLCC SD1C Infrared LED Rev B4, Page 4/6 SAFETY ADVICES Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 and IEC 62471. HANDLING ADVICES Because of the specific housing materials and geometries used, these LED devices are sensitive to rough handling or assembly and can thus be easily damaged or may fail in regard to their electro-optical operation. Excessive mechanical stress or load on the lens surface or to the glued cap must be avoided. DESIGN REVIEW: Notes on chip characteristics iC-SD85 / iC-SD85 Z No. Chip Design Function, Parameter/Code 1 iC-SD85 initial chip release 2 iC-SD85 Z Electrical Characteristics item 001 item 002 item 004 Description and Application Hints see datasheet revision A1 refined measurement condition changed min. / typ. values increased to 1.4 / 2.7 mW Table 4: Notes on chip functions regarding iC-SD85 / iC-SD85 Z iC-SD85 BLCC SD1C Infrared LED Rev B4, Page 5/6 REVISION HISTORY Rel Rel.Date Chapter A1 11-02-25 ... Modification Page Rel Rel.Date Chapter B1 12-10-16 ELECTRICAL CHARACTERISTICS Item 003 adapted Modification Page 3 Rel Rel.Date Chapter Modification Page B2 13-05-29 SAFETY ADVICES Chapter supplemented 4 Rel Rel.Date Chapter Modification Page B3 13-11-13 HANDLING ADVICES Chapter supplemented 4 Rel Rel.Date Chapter Modification Page B4 14-07-16 PACKAGES BLCC package drawing 1 PACKAGING INFORMATION BLCC package drawing 2 THERMAL DATA Item T03 adapted 3 REVISION HISTORY Chapter supplemented 5 ORDERING INFORMATION Package information supplemented 6 iC-Haus expressly reserves the right to change its products and/or specifications. An info letter gives details as to any amendments and additions made to the relevant current specifications on our internet website www.ichaus.de/infoletter; this letter is generated automatically and shall be sent to registered users by email. Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source. iC-Haus does not warrant the accuracy, completeness or timeliness of the specification and does not assume liability for any errors or omissions in these materials. The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of the product. iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be expected to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications include, without limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or environments or in automotive applications unless specifically designated for such use by iC-Haus. iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade mark rights of a third party resulting from processing or handling of the product and/or any other use of the product. iC-SD85 BLCC SD1C Infrared LED Rev B4, Page 6/6 ORDERING INFORMATION Type Package Order Designation iC-SD85 2-Pin BLCC, 8 mm x 6 mm, height 5.3 mm iC-SD85 BLCC SD1C RoHS compliant For technical support, information about prices and terms of delivery please contact: iC-Haus GmbH Am Kuemmerling 18 D-55294 Bodenheim GERMANY Tel.: +49 (0) 61 35 - 92 92 - 0 Fax: +49 (0) 61 35 - 92 92 - 192 Web: http://www.ichaus.com E-Mail: [email protected] Appointed local distributors: http://www.ichaus.com/sales_partners