The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Ultra-small Rack/Panel Crimp Connectors QR/P15 Series ●Separate connection to panel-mounted connectors Crimp terminated wires 7 Expansion of the proven QR/P Series with a separate panelmounted plugs / receptacles connecting with detachable crimp terminated connectors. Plugs / receptacles can be mounted on the panels and the terminated connectors may be inserted at later time, allowing wire crimp termination to be done away from the equipment. Available in 8 or 24 positions (with 4 positions for power contacts) and 40 positions. 1 A ■Overview Connector Panel Receptacle ■Features 1. Fully terminated connectors (crimp contacts) can be inserted / removed from the panel mounted plugs/receptacles. Polarization assures correct orientation, preventing incorrect insertion of the connectors in the module. Plug Panel 2. Sequenced contact mating (40-position only) The protection of the circuit is assured by having the 4 contact at each end of the receptacle protrude forward by 0.8 mm, with electrical wipe of 4.0 mm. Remaining contacts electrical wipe is 3.2 mm. 1 A 7 Connector Crimp terminated wires 3. Accepts power supply connections (24-position only) The 24-position connectors incorporate power supply contacts. The power supply connections use an MDF6 Series 4-position connector (3.5 mm pitch, UL and CSA recognized, and can handle 6A a current using AWG #16 conductors. 4. Reliable connections. Two-point contacts assure highly reliable electrical and mechanical connection. ■Applications PPC, data communications equipment, automatic vending machines, measuring instruments and other applications requiring small rack-and-panel connectors. 2008.3 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products Series●Ultra-small have been discontinued, or willRack/Panel be discontinuedCrimp soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. QR/P15 Connectors ■Specifications Signal: 1 A Power: 6 A 30V AC, DC Current rating Ratings Voltage rating Specification Item 1. Insulation resistance 1,000 Mø min. 2. Withstanding voltage No flashover or insulation breakdown 3. Contact resistance 50 mø max. 8 pos. 0.8 N min. 8 N max. 4. Mating/ 24 pos. 2.8 N min. 28 N max. Unmating forces 40 pos. 4.0 N min. 40 N max. 5. Durability Contact resistance: 60 mø max. 6. Vibration No electrical discontinuity of 10 μs or longer 7. Shock No electrical discontinuity of 10 μs or longer 8. Temperature cycle Contact resistance: 60 mø max. Insulation resistance: 1,000 Mø min. 9. Humidity (Steady state) 10. Hydrogen sulfide Contact resistance: 60 mø max. Insulation resistance: 1,000 Mø min. Contact resistance: 60mø max. Operating temperature range:-10°C to +60°C Conditions 500 V DC 500 V AC / 1 minute 100 mA Measured when mated with corresponding connector 1,000 cycles No damage, cracks or parts dislocation. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 3 directions for 2 hours No damage, cracks or parts dislocation. Acceleration of 490 m/s2, 11 ms duration, sine half-wave, 3 cycles in each of the 3 axis No damage, cracks or parts dislocation. No damage, cracks or parts dislocation. Temperature: -55 → +5 to 35 → +85 → +5 to 35 °C Time: -30 → +5 → +30 → +5 min. 5 cycles No damage, cracks or parts dislocation. 96 hours at 40°C, R.H. 90% to 95% 96 hours at a concentration of 3 ppm ■Materials / Finishes ●Plug Part Insulator Contacts Pin socket Shoulder Screw Material PBT Phosphor bronze Polyamide Steel Finish Color: Black Selective gold plated Color: Black, white (Natural)* Nickel plated Remarks UL94V-0 --------------UL94V-0 -------------- Material PBT Phosphor bronze Polyamide Finish Color: Black Selective gold plated Color: Black, white (Natural)* Remarks UL94V-0 -------------UL94V-0 ●Receptacle Part Insulator Contacts Pin socket *Insulator bodies for the MDF6 connectors in the 24-position power supply connector will be white. ■Ordering information QR / P15 - 24 (4) P- C (50) 1 2 3 4 5 6 1 Series name : QR/P15 2 Number of contacts : 8, 24, 40 3 Number of power contacts 4 Connector type : 4 (24 position connector only) P : Plug S : Receptacle 5 Series number 6 Specification number 2 50 : Standard The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose websiteQR/P15 RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series●Ultra-small Rack/Panel Crimp Connectors ■Connector Mating Charts and Wiring Termination Tables ●8-pos. P side (Plug) S side (Receptacle) 1 7 7 1 7 1 A A 7 1 DF11 crimp termination connector DF11 crimp termination connector QR/P15-8P-C QR/P15-8S-C Number of contacts Part Number CL No. RoHS 8 DF11-8DS-2C CL543-0503-0 YES Wire connection in applicable connectors ●24-pos. P side (Plug) 8 pos. Signal (DF11 connector) P side 1 3 5 7 2 4 6 8 S side 7 5 3 1 8 6 4 2 S side (Receptacle) DF11 crimp termination connector DF11 crimp termination connectorv 19 1 A 1 9 1 9 9 1 1 9 1 A 19 4 2 MDF6 crimp termination connector MDF6 crimp termination connector QR/P15-24(4)P-C Wire connection in applicable connectors Number of contacts Part Number CL No. 20 DF11-20DS-2C CL543-0509-7 4 MDF6-4DS-3.5C CL543-0074-1 ● 40-pos. QR/P15-24(4)S-C RoHS YES P side (Plug) 20 pos. Signal (DF11 connector) P side 1 3 5 ~ 15 17 19 2 4 6 ~ 16 18 20 S side 19 17 15 ~ 5 3 1 20 18 16 ~ 6 4 2 4 pos.Power (MDF6 connector) P side 1 2 3 4 S side 3 4 1 2 S side (Receptacle) 1 1 A 2 9 1 0 2 18 9 1 0 1 1 2 9 1 2 2 2 0 1 A 2 1 7 1 8 17 2 21 22 DF11 crimp termination connector DF11 crimp termination connector QR/P15-40P Wire connection in applicable connectors Number of contacts Part Number CL No. 18 DF11-18DS-2C CL543-0508-4 22 DF11-22DS-2C CL543-0510-6 QR/P15-40S RoHS YES 18 pos. Signal (DF11 connector) P side 1 3 5 ~ 13 15 17 2 S side 2 4 6 ~ 14 16 18 1 4 3 6 ~ 14 16 18 5 ~ 13 15 17 22 pos. Signal (DF11 connector) P side 1 3 5 ~ 17 19 21 2 S side 2 4 6 ~ 18 20 22 1 4 3 6 ~ 18 20 22 5 ~ 17 19 21 Note: Refer to the Nylon Connector Catalog for details about the wire terminations used in DF 11 and MDF6 connectors. 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products Series●Ultra-small have been discontinued, or willRack/Panel be discontinuedCrimp soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. QR/P15 Connectors ■Plugs ●8 pos. 34 10.7 3 17.1 12 1.9 26.6 2-M3x0.5x8 8.1 Screw (Supplied not-attached) (0.5mm float) QR/P15-8P-C Part Number CL No. RoHS QR/P15-8P-C(50) CL221-0247-0-50 YES 12.6 All dimensions: mm ●24 pos. 59 23.7 10.7 3 17.1 12 2.4 51.6 2-M3x0.5x8 Screw (Supplied not-attached) (0.5mm float) CL No. QR/P15-24(4)P-C(50) CL221-0249-6-50 RoHS YES 8.1 Part Number QR/P15-24(4)P-C 40.75 All dimensions: mm ●40 pos. 69.4 3 10.7 17.1 12 2.4 62 2-M3x0.5x8 Part Number CL No. RoHS QR/P15-40P(50) CL221-0252-0-50 YES 8.1 Screw (Supplied not-attached) (0.5mm float) QR/P15-40P 48 4 All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose websiteQR/P15 RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series●Ultra-small Rack/Panel Crimp Connectors ■Receptacles ●8 pos. 34 Ø3 8 2.5 3 8.1 17.4 2.5 12 1.9 .2 26.6 1.9 2- Part Number CL No. RoHS QR/P15-8P-C(50) CL221-0248-3-50 YES QR/P15-8S-C 12.6 ●24 pos. All dimensions: mm 59 2- Ø3 51.6 CL No. RoHS CL221-0250-5-50 YES 23.8 8.1 Part Number QR/P15-24(4)S-C(50) 3 17.4 8 2.5 2.5 12 2.4 .2 QR/P15-24(4)S-C 40.75 ●40 pos. All dimensions: mm 69.4 2- Ø3 62 12 2.4 .2 Part Number CL No. RoHS QR/P15-40S(50) CL221-0253-3-50 YES 8 2.5 3 8.1 17.4 2.5 Sequence terminal QR/P15-40S 48 All dimensions: mm 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products Series●Ultra-small have been discontinued, or willRack/Panel be discontinuedCrimp soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. QR/P15 Connectors ■Panel cutouts Applicable panel thickness: 1.5mm to 3.0mm <Plugs> <Receptacles> Mating side Mating side Front panel Rear panel ●All views are from the mating side Front panel 11.6+0.2 0 1.9±0.1 .5 16±0.1 2.7 +0.2 0 3.1±0.1 + 0 0.2 3. 25 12.7 +0.2 0 R0 +0 0 .2 .5 R0 M3∞0.5 R3 .3 .5 R0 16±0.1 M3∞0.5 1.9±0.1 18.6+0.2 0 26.6±0.1 +0.2 11.3+0.2 0 12.8 0 R .7 11.6+0.2 0 3.1±0.1 3.1±0.1 + 0 0.2 .5 R0 .7 3.1±0.1 +0 0 .2 Q R /P 1 5 - 8 S - C ( 5 0 ) Front panel 26.6±0.1 R3 1.9±0.1 Q R / P15-8P-C (50) R3 8 pos 17.8+0.2 0 12.6+0.2 0 2.3±0.1 15.1+0.2 0 M3∞0.5 1.9±0.1 R0 .5 8.8 +0.2 0 1.9±0.1 2.3±0.1 R0 .2 +0 0 .5 .5 15.9 +0.2 0 R2 26.6±0.1 9.6 +0.2 0 1.9±0.1 R2 M3∞0.5 .1 + 1.9±0.1 14.1+0.2 0 0 0 .2 Rear panel Rear panel 26.6±0.1 13.3+0.2 0 All dimensions: mm 24 pos ●All views are from the mating side Q R / P15-24(4)P-C (50) Q R /P 1 5 - 2 4 ( 4 ) S - C ( 5 0 ) Front panel Front panel 51.6±0.15 18.85+0.2 0 0 4.75-0.2 2.7+0.2 0 2.4±0.1 12.7+0.2 0 2.4±0.1 8.8 +0.2 0 M3∞0.5 2.4±0.1 41.7 +0.2 0 0 4.3 -0.2 3.1±0.1 3.1±0.1 2.4±0.1 + 0 0 .2 51.6±0.1 42.5 +0.2 0 13.5+0.2 0 .5 .3 Rear panel 51.6±0.1 19.25 +0.2 0 R0 41±0.1 42.8+0.2 0 Rear panel 2.4±0.1 2.4±0.1 9.6+0.2 0 R3 R0 25.2 +0.2 0 .2 +00 5 .2 R3 .5 41±0.1 M3∞0.5 6 3.1±0.1 .5 13.5+0.2 0 R 25.3+0.2 0 R0 3.1±0.1 2.4±0.15 0 7 3. 51.6±0.1 23.7 +0.2 0 12.7 +0.2 0 R3. 7 +0.2 M3∞0.5 2 0. + 0 43.6+0.2 0 M3∞0.5 2.4±0.1 24.1+0.2 0 R 0. 5 All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose websiteQR/P15 RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series●Ultra-small Rack/Panel Crimp Connectors Front panel 0 0 .2 2.4±0.1 .75 + R 0 2 3.1±0.1 R3 .45 + 0. 2.4±0.1 48.2 +0.2 0 2 0. + 0 8.45 +0.2 0 2.4±0.1 M3∞0.5 .7 .5 9.75+0.2 0 25.85 +0.2 0 R2. 05 +0 2.3±0.1 2.3±0.1 2.4±0.1 2.4±0.1 62±0.05 R2 R0 53 +0.2 0 Rear panel 62±0.1 49.5 +0.2 0 26.5+0.2 0 3 2.4±0.1 Rear panel M3∞0.5 25.7 +0.2 0 0. 0 .2 0 3.15 -0.2 R0 .5 +0.2 30.35 0 30.55 +0.2 0 .5 R0 .3 R0 29.45 +0.2 0 28.95 +0.2 0 12.65+0.2 0 R0 .3 R3 3.1±0.1 2.4±0.1 2 0. +0 29.45 +0.2 0 .5 5 .9 13.65+0.2 0 R0 R3 M3∞0.5 62±0.05 M3∞0.5 54+0.2 0 R3 62±0.1 .45 + 0 Front panel 2.4±0.1 Q R /P 1 5 - 4 0 S ( 5 0 ) 2.5+0.2 0 3.1±0.1 Q R / P15-40P(50) . 0 2 40 pos. ●All views are from the mating side All dimensions: mm ■Mated condition (Shown for reference) Note: The distance between the plug and receptacle when fully mated must be 1.5 mm max. as shown below. 1.5mm MAX Plug Receptacle ■Float – Plug (Shown for reference) Note: Floating distance for shoulder screw is ± 0.5 mm. Float: ± 0.5 mm Panel 7