XP Power AEP06US05 Continous short circuit protection Datasheet

ACDC
625 Watts
AEP Series
xppower.com
•
Universal Input 90264 VAC
•
Continous Short Circuit Protection
•
EN550022 Class B
•
Low Cost
•
6, 15 and 25 Watt Versions
•
Nonstandard Outputs Available
•
3 Year Warranty
Specification
Input
Input Voltage
Input Frequency
Input Current
Inrush Current
Power Factor
General
• 90-264 VAC
• 47-63 Hz
• 0.5/0.25 A max at 115/230 VAC (6 W & 15 W)
0.7/0.3 A at 115/230 VAC (25 W)
• 15/30 A max at 115/230 VAC (6 W)
25/50 A max at 115/230 VAC (15 W & 25 W)
• Meets EN61000-3-2, Class A
Efficiency
Isolation
Switching Frequency
Power Density
MTBF
• Typically 67% for 6 W,
75% for 15 W,
80% for 25 W
• 3000 VAC Input to Output
• 30-200 kHz (6 W)
30-35 kHz typical (15 W & 25 W)
• 0.75 W/in3 (6W), 1.87 W/in3 (15 W)
1.88 W/in3 (25 W)
• >200 kHrs to MIL-HDBK-217F at 25 °C, GB
Output
Output Voltage
Initial Set Accuracy
Minimum Load
Start Up Delay
•
•
•
•
Hold Up Time
•
Line Regulation
Load Regulation
Ripple & Noise
Overvoltage Protection
Overload Protection
Short Circuit Protection
•
•
•
•
•
•
Temp. Coefficient
•
See tables
See tables
No minimum load requirement
6 W 100 ms,
15 W 270 ms,
25 W 280 ms
10 ms typical at 115 VAC,
60 ms typical at 230 VAC
See tables
See tables
1 % pk-pk max (see note 2)
125% typical
Trip and restart (Hiccup mode)
Constant current (6 W)
Continuous (auto recovery) (15 W & 25 W)
±0.05%/°C
Environmental
Operating Temperature • 0 °C to +60 °C, derate linearly from +40 °C
at 100% load to 60% load at +60 °C (6 W
& AEP15 5 V-13.6 V), 50% load at 60 °C
(25 W & AEP15 15 V-24 V)
Storage Temperature • -20 ˚ C to +85 ˚ C
Operating Humidity
• 93% RH, non-condensing
Operating Altitude
• 2000 m
EMC & Safety
Emissions
Harmonic Currents
Voltage Flicker
• EN55022 Class B conducted and radiated
• EN61000-3-2 Class A
• EN61000-3-3
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
•
•
•
•
Conducted Immunity
Dips & Interruptions
Safety Approvals
EN61000-4-2, level 2 Perf Criteria B
EN61000-4-3, level 2 Perf Criteria A
EN61000-4-4, level 2 Perf Criteria B
EN61000-4-5, Installation Class 2,
Perf Criteria B
• EN61000-4-6, level 2 Perf Criteria B
• EN61000-4-11, 5 % UT 10 ms, Perf
Criteria B, 70 % UT 500 ms,
Perf Criteria C
• EN60950, UL1950,
CSA C22.2 No.234 cUL
Output Voltage
4.2
5.0
6.0
6.5
7.0
7.5
8.0
9.0
10.0
12.0
Output Current
V
V
V
V
V
V
V
V
V
V
1000
1200
1000
650
650
650
650
650
600
500
Ripple & Noise(2)
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
Initial Set
Accuracy(1)
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Line
Regulation(3)
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
Load
Regulation(4)
±4%
±4%
±4%
±3%
±3%
±3%
±3%
±2%
±2%
±2%
ACDC
AEP06
Models and Ratings
Model
Number
AEP06US042
AEP06US05
AEP06US06
AEP06US065
AEP06US07
AEP06US075
AEP06US08
AEP06US09
AEP06US10
AEP06US12
Notes
1. Initial set accuracy is at 60% full load.
2. Add a 0.1µF E.L capacitor to output for ripple & noise measurement at 20 MHz BW.
3. Line regulation measured from 100 VAC to 240 VAC, full load.
4. Load regulation measured from 60% to full load and from 60% to 20% load (60% ±40% load).
Mechanical Details 6 & 15 Watt Models
All dimensions are in inches (mm)
0.54
(13.7)
2.05
2.71 (52.0)
(68.9)
2.83
(72.0)
0.37
(9.5)
2.05
3.53 (52.0)
(89.7)
2.83
(72.0)
70.87 ±1.97
(1800.0 ±50.0)
0.50
(12.7)
70.87 ±1.97
(1800.0 ±50.0)
0.67
(17.0)
0.75
(19.0)
1.38
(35.0)
1.38
(35.0)
To order US add suffix’ -US’ to model number
2.83
(72.0)
3.31
(84.0)
2.05
(52.0)
0.71
(18.0)
To order European add suffix’ -EU’ to model number
2.05
(52.0)
2.83
(72.0)
3.40
(86.3)
70.87 ±1.97
(1800.0 ±50.0)
70.87 ±1.97
(1800.0 ±50.0)
0.67 (17.0)
1.38
(35.0)
To order Australian add suffix’ -AU’ to model number
Weight: AEP06: 0.3 lb (135 g)
AEP15: 0.35 lb (160 g)
Output Plug: 0.22 x 0.10 x 0.37 (5.5 x 2.5 x 9.5)
0.71 (18.0)
1.38
(35.0)
To order UK add suffix’ -UK’ to model number
0.14
(3.5)
0.
(1
Output Voltage
5.0
6.0
7.5
9.0
12.0
13.6
15.0
18.0
24.0
3.3
5.0
12.0
15.0
18.0
24.0
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Output Current
2.00
1.50
1.60
1.40
1.00
1.00
1.00
0.83
0.63
4.00
4.00
2.10
1.67
1.40
1.05
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Ripple & Noise(2)
1%
1%
1%
1%
1%
1%
1%
1%
1%
50 mV pk-pk
1%
1%
1%
1%
1%
Initial Set
Accuracy(1)
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
Line
Regulation(3)
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
Load
Regulation(4)
±4%
±4%
±4%
±4%
±4%
±4%
±4%
±4%
±4%
±6%
±6%
±5%
±3%
±2%
±2%
Model
Number
AEP15US05
AEP15US06
AEP15US075
AEP15US09
AEP15US12
AEP15US136
AEP15US15
AEP15US18
AEP15US24
AEP25US033
AEP25US05
AEP25US12
AEP25US15
AEP25US18
AEP25US24
Notes
1. Initial set accuracy is at 60% full load.
2. Add a 0.1µF E.L capacitor to output for ripple & noise measurement at 20 MHz BW.
3. Line regulation measured from 100 VAC to 240 VAC, full load.
4. Load regulation measured from 60% to full load and from 60% to 20% load (60% ±40% load).
Mechanical Details 25 Watt Models
All dimensions are in inches (mm)
For 15 Watt model mechanical details see 6 Watt model
1.89
(48.0)
3.19
(81.0)
7
3
3.19
(81.0)
70.87 ±1.97
(1800.0 ±50.0)
70.87 ±1.97
(1800.0 ±50.0)
3
2.20
(56.0)
2.20
(56.0)
To order US add suffix’ -US’ to model number
3.19
(81.0)
To order European add suffix’ -EU’ to model number
1.89
(48.0)
3.19
(81.0)
1.89
(48.0)
3.19
(81.0)
1.89
(48.0)
3.19
(81.0)
70.87 ±1.97
(1800.0 ±50.0)
2.20
(56.0)
3.19
(81.0)
3
To order Australian add suffix’ -AU’ to model number
70.87 ±1.97
(1800.0 ±50.0)
2.20
(56.0)
3.19
(81.0)
3
To order UK add suffix’ -UK’ to model number
Weight: 0.485 lb (220 g)
Output Plug: 0.22 x 0.10 x 0.37 (5.5 x 2.5 x 9.5)
07-Sept-11
ACDC
AEP1525
Models and Ratings
Similar pages