HMC263LP4E v01.0709 Amplifiers - Low Noise - SMT 7 GaAs MMIC LOW NOISE AMPLIFIER, 24 - 36 GHz Typical Applications Features The HMC263LP4E is ideal for: Low Noise Figure: 2.2 dB • Millimeterwave Point-to-Point Radios High Gain: 20 dB • LMDS Single Positive Supply: +3V or +5V • VSAT DC Blocked RF I/Os • SATCOM No External Matching 24 Lead 4x4mm QFN Package: 16mm² Functional Diagram General Description The HMC263LP4E is a GaAs MMIC Low Noise Amplifier (LNA) which covers the frequency range of 24 to 36 GHz and is housed in a leadless plastic SMT package. The HMC263LP4E utilizes a GaAs PHEMT process offering 20 dB gain from a single bias supply of + 3V @ 58 mA with a noise figure of 2.2 dB. The HMC263LP4E may be used in conjunction with HMC264LC3B or HMC265LM3 mixers to realize a millimeterwave system receiver. The RF I/Os are DC blocked and matched to 50 Ohms requiring no external components. Electrical Specifications, TA = +25° C, Vdd = +3V Parameter Min. Frequency Range Gain 7-1 Typ. Max. Min. 24 - 27 19 21 Gain Variation Over Temperature 0.03 Noise Figure 2.0 Typ. Max. Min. 27 - 32 27 17 19 23 0.03 3.0 2.2 Typ. Max. 32 - 36 15 17 GHz 20 0.03 3.0 2.5 Units dB dB/°C 4.0 dB Input Return Loss 12 9 11 dB Output Return Loss 10 9 9 dB Output Power for 1 dB Compression (P1dB) 6 8 9 dBm Saturated Output Power (Psat) 9 11 12 dBm Output Third Order Intercept (IP3) 16 Supply Current (Idd) (@ Vdd = +3.0V) 58 18 77 58 20 77 58 dBm 77 mA For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC263LP4E v01.0709 GaAs MMIC LOW NOISE AMPLIFIER, 24 - 36 GHz 26 22 22 18 +25 C +85 C - 40 C 18 +25 C +85 C - 40 C 14 10 10 18 22 26 30 34 38 18 22 FREQUENCY (GHz) Input Return Loss @ Vdd = +3V 34 38 34 38 0 +25 C +85 C - 40 C -5 RETURN LOSS (dB) RETURN LOSS (dB) 30 Input Return Loss @ Vdd = +5V 0 -10 -15 -20 +25 C +85 C - 40 C -5 -10 -15 -20 18 22 26 30 34 38 18 22 FREQUENCY (GHz) 26 30 FREQUENCY (GHz) Output Return Loss @ Vdd = +3V Output Return Loss @ Vdd = +5V 0 0 +25 C +85 C - 40 C -5 RETURN LOSS (dB) RETURN LOSS (dB) 26 FREQUENCY (GHz) Amplifiers - Low Noise - SMT 26 14 7 Gain vs. Temperature @ Vdd = +5V GAIN (dB) GAIN (dB) Gain vs. Temperature @ Vdd = +3V -10 -15 -20 +25 C +85 C - 40 C -5 -10 -15 -20 18 22 26 30 FREQUENCY (GHz) 34 38 18 22 26 30 34 38 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 7-2 HMC263LP4E v01.0709 7 GaAs MMIC LOW NOISE AMPLIFIER, 24 - 36 GHz Noise Figure vs. Temperature @ Vdd = +3V Noise Figure vs. Temperature @ Vdd = +5V 8 +25 C +85 C - 40 C +25 C +85 C - 40 C 6 NF (dB) NF (dB) 6 4 2 4 2 0 0 18 22 26 30 34 38 18 22 FREQUENCY (GHz) 34 38 34 38 0 +25 C +85 C - 40 C +25 C +85 C - 40 C -20 ISOLATION (dB) -20 -40 -40 -60 -80 -80 18 22 26 30 34 38 18 22 FREQUENCY (GHz) 30 Output P1dB @ Vdd = +5V 16 12 12 P1dB (dBm) 16 8 +25 C +85 C - 40 C 4 26 FREQUENCY (GHz) Output P1dB @ Vdd = +3V P1dB (dBm) 30 Isolation @ Vdd = +5V 0 -60 8 +25 C +85 C - 40 C 4 0 0 18 22 26 30 FREQUENCY (GHz) 7-3 26 FREQUENCY (GHz) Isolation @ Vdd = +3V ISOLATION (dB) Amplifiers - Low Noise - SMT 8 34 38 18 22 26 30 34 38 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC263LP4E v01.0709 GaAs MMIC LOW NOISE AMPLIFIER, 24 - 36 GHz 18 14 14 10 +25 C +85 C - 40 C +25 C +85 C - 40 C 10 6 2 2 18 22 26 30 34 38 18 22 FREQUENCY (GHz) 26 30 34 38 FREQUENCY (GHz) Output IP3 @ Vdd = +3V Output IP3 @ Vdd = +5V 25 20 20 IP3 (dBm) 25 15 +25 C +85 C - 40 C 10 15 +25 C +85 C - 40 C 10 5 Amplifiers - Low Noise - SMT 18 6 IP3 (dBm) 7 Psat @ Vdd = +5V Psat (dBm) Psat (dBm) Psat @ Vdd = +3V 5 18 22 26 30 FREQUENCY (GHz) 34 38 18 22 26 30 34 38 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 7-4 HMC263LP4E v01.0709 Amplifiers - Low Noise - SMT 7 GaAs MMIC LOW NOISE AMPLIFIER, 24 - 36 GHz Absolute Maximum Ratings Drain Bias Voltage (Vdd1, Vdd2) +5.5 Vdc RF Input Power (RFIN)(Vdd = +3 Vdc) -5 dBm Channel Temperature 175 °C Continuous Pdiss (T = 85 °C) (derate 7.7 mW/°C above 85 °C) 0.7 W Thermal Resistance (channel to ground paddle) 130 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC263LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL3 [2] Package Marking [1] H263 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C 7-5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC263LP4E v01.0709 GaAs MMIC LOW NOISE AMPLIFIER, 24 - 36 GHz Pin Number Function Description 1, 2, 4 - 7, 12 - 15, 17 - 19, 24 GND Package bottom has exposed metal paddle that must be connected to RF/DC ground. 3 RFIN This pin is AC coupled and matched to 50 Ohm. 8 - 11, 21, 23 N/C Not connected. 16 RFOUT This pin is AC coupled and matched to 50 Ohm. 22, 20 Vdd1, Vdd2 Power supply for the 4-stage amplifier. See application circuit for required external components. Interface Schematic Application Circuit For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Amplifiers - Low Noise - SMT 7 Pin Description 7-6 HMC263LP4E v01.0709 Evaluation PCB Amplifiers - Low Noise - SMT 7 GaAs MMIC LOW NOISE AMPLIFIER, 24 - 36 GHz List of Materials for Evaluation PCB 123965 Item Description J1, J2 PCB Mount K Connector J3 - J5 DC Pin C1, C2 100 pF Capacitor, 0402 Pkg. C3, C4 10 nF Capacitor, 0603 Pkg. C5, C6 4.7 µF Capacitor, Tantalum U1 HMC263LP4E PCB [2] 123963 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25 FR 7-7 [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC263LP4E v01.0709 GaAs MMIC LOW NOISE AMPLIFIER, 24 - 36 GHz 7 Amplifiers - Low Noise - SMT Notes: For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 7-8