LANEW Series 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range FEATURES ● Low Ripple & Noise ● 2 Watts Output Power ● Single and Dual Output ● External ON/OFF Control ● 2:1 Wide Input Voltage Range ● UL94-V0 Case Potting Materials ● Continuous Short Circuit Protection ● Input to Output Isolation up to 1KVDC ● SIP Package: 0.86 x 0.36 x 0.44 Inches ● No External Input and Output Capacitor Needed SPECIFICATIONS: LANEW Series o All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS 5V nominal input 12V nominal input Input Voltage Range 24V nominal input 48V nominal input Input Current Input Filter Input Voltage Variation dv/dt Input Surge Voltage (100ms max) Input Reflected Ripple Current (There is an external capacitor at input (See Note 2)) Start Up Time (Nominal Vin and constant resistive Load) 5V nominal input 12V nominal input 24V nominal input 48V nominal input 5V nominal input (100µF) 12V nominal input (100µF) 24V nominal input (10µF) 48V nominal input (10µF) Power Up Remote ON/OFF DC-DC ON DC-DC OFF 4.5 – 9 VDC 9 – 18 VDC 18 – 36 VDC 36 – 75 VDC See Table Capacitor Type 5V/ms, max (Complies) 15 VDC 36 VDC 50 VDC 100 VDC 400mAp-p 150mAp-p 380mVp-p 170mVp-p 1ms typ 1ms typ Open or high impedance Control pin applied current 4 ~ 8mA max (via 1KΩ) Remote OFF Input Current (nominal input) 1mA max Application Circuit Remote ON/OFF OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy (Full load and nominal Vin) Line Regulation (Low line to high line at full load) Load Regulation (25% to 100% full load) Cross Regulation (Dual) Minimum Load (See Note 1) Single Output Dual Output Asymmetrical load 25% / 100% FL Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 See Table ±1% ±0.5% ±0.75% ±1% ±5% 10% of full load LANEW Series 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range SPECIFICATIONS (CONTINUED) OUTPUT SPECIFICATIONS (CONTINUED) Output Power Output Current Ripple & Noise (20MHz bandwidth) Transient Response Recovery Time Temperature Coefficient PROTECTION Short Circuit Protection GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage (input to output) Insulation Resistance Isolation Capacitance ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Relative Humidity Thermal Shock Vibration MTBF (see Note 3) PHYSICAL SPECIFICATIONS Weight Dimensions Case Material Base Material Potting Material SAFETY & EMC Safety Approvals and Standards 2 Watts max. See Table 50mVp-p 500µs typ. ±0.1% / °C max. 25% load step change Continuous, automatic recovery See Table 100KHz, min. 1000VDC, min. 10GΩ min. 300pF Full load to minimum load -40°C to +85°C -55°C to +105°C 5% to 95% RH MIL-STD-810D 10-55Hz, 10G, 30 minutes along X, Y, and Z axis 5,017,000 hours 4.8 grams (0.17oz) 0.86 x 0.36 x 0.44 inches (21.8 x 9.2 x 11.1 mm) Non-conductive black plastic None Silicon (UL94-V0) Meets IEC60950-1, UL60950-1, EN60950-1 5V nominal input 12V nominal input 24V nominal input 48V nominal input 100µF & 10µF 100µF & 10µF 10µF & 120µF 10µF & 120µF Meet EN55022 classes B recommend circuit with an external L-C filter at input EMC External Circuit EMC Characteristics (See Note 4) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEW Series 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range OUTPUT VOLTAGE / CURRENT RATING CHART Model Number LANEW533R LANEW505R LANEW509R LANEW512R LANEW515R LANEW505RD LANEW512RD LANEW515RD LANEW1233R LANEW1205R LANEW1209R LANEW1212R LANEW1215R LANEW1205RD LANEW1212RD LANEW1215RD LANEW2433R LANEW2405R LANEW2409R LANEW2412R LANEW2415R LANEW2405RD LANEW2412RD LANEW2415RD LANEW4833R LANEW4805R LANEW4809R LANEW4812R LANEW4815R LANEW4805RD LANEW4812RD LANEW4815RD Input Range 5 VDC (4.5 – 9 VDC) 12 VDC (9 – 18 VDC) 24 VDC (18 – 36 VDC) 48 VDC (36 – 75 VDC) Output Voltage 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output Current Min. load Full load 50mA 500mA 40mA 400mA 22mA 222mA 17mA 167mA 13mA 134mA ±20mA ±200mA ±8mA ±83mA ±7mA ±67mA 50mA 500mA 40mA 400mA 22mA 222mA 17mA 167mA 13mA 134mA ±20mA ±200mA ±8mA ±83mA ±7mA ±67mA 50mA 500mA 40mA 400mA 22mA 222mA 17mA 167mA 13mA 134mA ±20mA ±200mA ±8mA ±83mA ±7mA ±67mA 50mA 500mA 40mA 400mA 22mA 222mA 17mA 167mA 13mA 134mA ±20mA ±200mA ±8mA ±83mA ±7mA ±67mA Input Current (5) Efficiency (6) 540mA 615mA 596mA 588mA 582mA 645mA 595mA 598mA 202mA 234mA 222mA 219mA 220mA 242mA 224mA 226mA 102mA 115mA 109mA 109mA 108mA 117mA 112mA 110mA 52mA 60mA 56mA 55mA 55mA 62mA 57mA 57mA 65% 69% 71% 72% 73% 66% 71% 71% 72% 75% 79% 80% 80% 73% 78% 78% 71% 76% 80% 80% 81% 75% 78% 80% 70% 74% 78% 80% 79% 75% 77% 77% Capacitor (7) Load max 2200uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF 2200uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF 2200uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF 2200uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF NOTES: 1. The LANEW Series requires a minimum 10% loading at the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specifications. 2. It will not damage the device without inserting external input capacitors. There is a smaller reflected ripple current when a capacitor is put at the input. The capacitor recommended is “CHEMICON” LXZ series or equivalent for 05 & 12Vin and “CHEMICON” KMF series or equivalent for 24 & 48Vin. 3. BELLCORE TR-NWT-000332. Case: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment). 4. The LANEW series meet EN55022 classes A with a filter at input. The filter capacitor recommended is same as Note 2. 5. Maximum value at nominal input voltage and full load. 6. Typical value at nominal input voltage and full load. 7. Test by minimum Vin and constant resistive load. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEW Series 2 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range DERATING CURVE & EFFICIENCY GRAPHS MECHANICAL DRAWING Pin 1 2 3 5 6 7 8 PIN CONNECTION Single Output Dual Output -INPUT -INPUT +INPUT +INPUT CTRL CTRL NC NC +OUTPUT +OUTPUT -OUTPUT COMMON NC -OUTPUT Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797