Microdc G1212XD-2W Fixed input,isolated&unregulated singleâ dual output dcâ dc converter Datasheet

H-XD-2W&G-XD-2W Series
FIXED INPUT,ISOLATED&UNREGULATED Single∕Dual Output DC∕DC Converter
PRODUCT PROGRAM
Input
Output
Voltage
(VDC)
Max
Min
Efficiency
(%,Typ)
Certificate
H0505XD-2W
5
400
40
75
UL
H0509XD-2W
9
222
23
76
UL
H0512XD-2W
12
167
17
78
UL
H0515XD-2W
15
133
13
77
UL
◆6KVDC Isolation
G0505XD-2W
±5
±200
±20
75
UL
G0509XD-2W
±9
±111
±12
77
UL
◆DIP Package
G0512XD-2W
±12
±84
±9
79
UL
G0515XD-2W
±15
±67
±7
78
UL
H1205XD-2W
5
400
40
75
UL
H1209XD-2W
9
222
23
78
UL
H1212XD-2W
12
167
17
80
UL
15
133
14
78
UL
◆Internal SMD Construction
G1205XD-2W
±5
±200
±20
76
UL
G1209XD-2W
±9
±111
±12
78
UL
◆No External Component Required
G1212XD-2W
±12
±84
±9
80
UL
G1215XD-2W
±15
±67
±7
78
UL
H2405XD-2W
5
400
40
77
H2409XD-2W
9
222
23
78
H2412XD-2W
12
167
17
81
H2415XD-2W*
15
133
14
80
G2405XD-2W*
±5
±200
±20
77
G2409XD-2W*
±9
±111
±12
78
G2412XD-2W*
±12
±84
±9
81
G2415XD-2W*
±15
±67
±7
*Designing.
Note: The G_XD-1W/H_XD-1W series also are available in our company.
80
Part Number
FEATURES
◆High Efficiency up to 81%
◆Low Isolation capacitance
◆Temperature Range -40℃ to +85℃
◆No Heat Sink Require
Nomin
al
H1215XD-2W
◆Continuous short circuit protection
◆Industry Standard Pinout
◆RoHS Compliance
MODEL SELECTION
G①05②05③X④ D⑤-2W⑥
①Product Series
③Output Voltage
⑤DIP Package
Voltage(VDC)
②Input Voltage
④Package Style
⑥Rated Power
APPLICATIONS
The G_XD-2W & H_XD-2W Series are specially
designed for applications where a group of
polar power supplies are isolated from the
input power supply in a distributed power
supply system on a circuit board.
These products apply to:
1) Where the voltage of the input power
supply is fixed (voltage variation ≤10%);
2) Where isolation is necessary between
input and output (isolation voltage≤ 6000VDC);
3) Where the regulation of the output
voltage and the output ripple noise are not
demanded.
Such as: purely digital circuits, ordinary
low frequency analog circuits, and IGBT power
device driving circuits.
5
12
24
Range
4.5-5.5
10.8-13
21.6-26.4
Current (A)
ISOLATION SPECIFICATIONS
Item
Test conditions
Min.
Isolation voltage
Tested for 1 minute and 1mA max
6000
Isolation resistance
Test at 500VDC
1000
Isolation capacitance
Typ.
Max
MΩ
3.5
PF
COMMON SPECIFICATIONS
Item
Test conditions
Min
Typ.
Storage humidity
Operating temperature
-40
Storage temperature
-55
Temp. rise at full load
Lead temperature
Max
Unit
95
%
85
125
15
1.5mm from case for 10 seconds
300
Continuous
Cooling
Free air convection
Case material
Plastic(UL94-V0)
MTBF
℃
30
Short circuit protection
3500
Weight
K hours
8.2
MICRODC reserves the copyright
http://www.microdc.cn
Unit
VDC
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 1 of 2
g
H-XD-2W&G-XD-2W Series
Recommended testing and application circuit
OUTPUT SPECIFICATIONS
Item
Test conditions
Output power
Max.
Units
2
W
±1.2
For Vin change of 1%
5V output
10
15
10% to 100%
9V output
8.3
15
load
12V output
6.8
15
6.3
15
15V output
Output voltage accuracy
%
See tolerance envelope graph
Temperature drift
100% full load
Ripple & Noise*
20MHz Bandwidth
Switching frequency
Typ.
0.2
Line regulat ion
Load regulation
Min.
If you want to further decrease the input/output ripple, an“LC“filtering
network may be connected to the input and output ends of the DC/DC
converter, see(Figure 1)。
150
Full load,
5V input
35
nominal input
12V,24V input
50
0.03
%/℃
250
mVp-p
*Test ripple and noise by "parallel cable"method. See detailed operation instructions at Testing of
Power Converter section, application notes.
Note: Dual output models unbalanced load: ±5%
TYPICAL CHARACTERISTICS
(Figure 1)
KHz
It should also be noted that the inductance and the frequency of
the “LC“ filtering network should be staggered with the DC/DC
frequency to avoid mutual interference. However, the capacitance of
the output filter capacitor must be proper. If the capacitance is
too big, a startup problem might arise. For every channel of output,
provided the safe and reliable operation is ensured, the greatest
capacitance of its filter capacitor sees (Table 1).
Vin
(VDC)
5
12
24
--
EXTERNAL CAPACITOR TABLE (Table 1)
Cin
Single Vout
Cout
Dual Vou
(μF)
4.7
2.2
1
--
(VDC)
5
9
12
15
(μF)
10
4.7
2.2
1
(VDC)
±5
±9
±12
±15
Cout
(μF)
4.7
2.2
1
1
It's not recommend to connect any external capacitor in the application field
with less than 0.5 watt output.
Output Voltage Regulation and Over-voltage Protection Circuit
The simplest device for output voltage regulation, over-voltage and
over-current protection is a linear voltage regulator with overheat protection
that is conne ct ed to the inpu t or outp ut end in ser i es (F i gu r e 2) .
OUTLINE DIMENSIONS & PIN CONNECTIONS
Overload Protection
Under normal operating conditions, the output circuit of these
products has no protection against overload. The simplest method is
to connect a self-recovery fuse in series at the input end or add a circuit
breaker to the circuit.
No parallel connection or plug and play.
Note:
1. All specifications measured at Ta=25℃, humidity<75%,nominal input
voltage and rated output load unless otherwise specified.
2. Only typical models listed, other models may be different,
please contact our technical person for more details.
3. Operation under minimum load will not damage the
converter; However, they may not meet all specification listed.
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature
of 300°C for 10 seconds.
The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin
with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this
series are backward compatible with Sn/Pb soldering systems.
Microdc Professional Power Module,Inc.
Tel:0086-20-86000646
REACH COMPLIANT INFORMATION
E-mail:[email protected]
Website:http://www.microdc.cn
http://www.microdc.cn
This series has proven that this product does not contain harmful chemicals, it also has
harmful chemical substances through the registration, inspection and approval.
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 2 of 2
Similar pages