MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL RoHS/RoHS II Compliant ABSM2 Pb in high temperature solder (exempt per RoHS 2002/95/EC Annex (7)) Obsolete/End of Life Date: 12/31/2014 – Last Time Buy Date: March 31,2015 FEATURES: • Suitable for RoHS compliant reflow • Available tight tolerance and temperature stability 12.5 x 4.6 x 3.7mm | | | | | | | | | | | | | | | APPLICATIONS: • Computers, Modems, Microprocessors • Communication, Test equipment • PCMCIA STANDARD SPECIFICATIONS: Parameters Available Frequencies Minimum Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Equivalent series resistance (R1) Shunt capacitance (C0) Typical Maximum See Table 2 below Fundamental: Standard 3rd Overtone: Standard Fundamental: Option. See options below -10 ----+60 -55 ----+125 -50 ----+50 Units MHz ------------ºC ºC ppm -50 ----- +50 ppm ----- See table 1 below ----- 7.0 Ω pF Load capacitance (CL) ----- 18.0 ----- pF Drive Level ----- ----- 100 µW Aging -5 ----- +5 ppm 500 ----- ----- MΩ Insulation Resistance Notes 3.50 MHz - 30.000 MHz 30.001 MHz - 70.000 MHz 30.001 MHz - 32.000 MHz See options See options See options Standard (See options if other than STD) @25°C±3°C First year @ 100Vdc ± 15V Table 2 Table 1. Standard ESR Frequency (MHz) 3.50 - 3.999 4.000 - 5.999 6.000 - 11.999 12.000 - 32.000 (fund) 30.000 - 35.999 (3rd overtone) 33.000 - 70.000 (3rd overtone) ESR (Ω) max. 200 150 100 50 100 80 Available Frequency List [MHz] 3.579545 6.000000 10.240000 16.000000 20.000000 30.000000 48.000000 3.686400 6.144000 10.240000 16.000312 20.480000 32.000000 48.000000 3.932160 6.176000 11.000000 16.257000 22.118400 32.768000 49.152000 4.000000 6.400000 11.059200 16.384000 24.000000 33.000000 50.000000 4.032000 7.159090 11.289600 16.666000 24.000140 33.333000 53.125000 4.096000 7.372800 12.000000 16.667000 24.576000 33.333300 55.000000 4.194304 7.680000 12.288000 16.934400 24.704000 33.868800 60.000000 4.433619 8.000000 12.352000 16.934400 25.000000 34.000000 64.000000 4.800000 8.000156 12.500000 17.734475 25.175000 35.468950 66.000000 4.915200 8.192000 13.000000 18.000000 27.000000 36.000000 66.666600 5.000000 9.216000 13.500000 18.432000 28.000000 40.000000 5.068800 9.600000 14.318180 18.869600 28.322000 40.960000 5.120000 9.830000(Left 14.745600 19.200000 blank if standard) 28.636360 44.000000 5.333333 9.830400 15.000000 19.440000 29.491200 45.000000 5.529600 10.000000 15.360000 19.660800 29.500000 47.940000 OPTIONS & PART IDENTIFICATION: ABSM2 - MHz - - - Frequency in MHz* Please specify the frequency in MHz. e.g. 16.000MHz ABRACON IS ISO9001:2008 CERTIFIED CE RTIFIED Packaging Blank: Bulk T: 1000pcs/reel Oscillation Mode Load Capacitance (pF)* Please specify CL (min 10pF) in pF or S for series Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) - F: Fundamental AT for 30MHz<F<32MHz Operating Temp. * E: 0°C to +70°C B: -20°C to +70°C C: -30°C to +70°C N: -30°C to +85°C D: -40°C to +85°C Freq. Tolerance* 4: ± 30 ppm Freq. Stability* Y: ± 30 ppm H: ± 35 ppm Z: ± 100 ppm R: ± 150 ppm *Frequency, Load Capacitance, Frequency tolerance and stability is subject to availability. Please contact Abracon for each option for availability. Revised: 10.23.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL ABSM2 RoHS/RoHS II Compliant Pb in high temperature solder (exempt per RoHS 2002/95/EC Annex (7)) 12.5 x 4.6 x 3.7mm | | | | | | | | | | | | | | | OUTLINE DRAWING: Dimensions: Inches (mm) TAPE & REEL: T=Tape and reel (1000pcs/reel) REFLOW PROFILE: Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.23.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com