Product Option Sheet March 28, 2008 Eighth Brick Power Modules Heat Sinks: ¼”, ½”, 1” Longitudinal and Transverse Heat Sinks RoHS Compliant Features Compliant to RoHS EU Directive 2002/95/EC (Z versions) including screws Heat Sink Material: 6063-T5 Aluminum Heat Sink Finish: Black anodize per MIL-A-8625, Type II, Class 2 Size: Length: 2.28 in. Width: 0.90 in. Available heights: ¼”, ½”, 1” Available in Longitudinal and Transverse Orientations ISO** 9001 and ISO 14001 certified manufacturing facilities Description These heat sinks are to be used with Lineage Power’s Eighth Brick power modules equipped with the base plate option (-C or -H option in the module part number). The base plate is factory attached to the module and is designed to make thermal contact with the power dissipating components on the module and conduct this heat to the outer surface of the base plate. If a heat sink is attached to this surface of the base plate, it is possible to deliver increased output power for a specific ambient air temperature and airflow rate. These heat sinks are available in kits that come complete with the heat sink, attached thermal interface material and attachment screws. ** ISO is a registered trademark of the International Organization of Standards Document No: PO08-002 ver. 1.2 PDF name: eighth_hs_po.pdf Product Option Sheet March 28, 2008 Eighth Brick Power Module Heat Sinks: ¼”, ½”, 1” Longitudinal and Transverse Heat Sinks Mechanical Outline ¼” Transverse Dimensions are in inches Tolerances: x.xx in. ± 0.01 in. [unless otherwise indicated] x.xxx in ± 0.005 in. LINEAGE POWER 2 Product Option Sheet March 28, 2008 Eighth Brick Power Module Heat Sinks: ¼”, ½”, 1” Longitudinal and Transverse Heat Sinks Mechanical Outline ¼” Longitudinal Dimensions are in inches Tolerances: x.xx in. ± 0.01 in. [unless otherwise indicated] x.xxx in ± 0.005 in. LINEAGE POWER 3 Product Option Sheet March 28, 2008 Eighth Brick Power Module Heat Sinks: ¼”, ½”, 1” Longitudinal and Transverse Heat Sinks Mechanical Outline ½” Transverse Dimensions are in inches Tolerances: x.xx in. ± 0.01 in. [unless otherwise indicated] x.xxx in ± 0.005 in. LINEAGE POWER 4 Product Option Sheet March 28, 2008 Eighth Brick Power Module Heat Sinks: ¼”, ½”, 1” Longitudinal and Transverse Heat Sinks Mechanical Outline ½” Longitudinal Dimensions are in inches Tolerances: x.xx in. ± 0.01 in. [unless otherwise indicated] x.xxx in ± 0.005 in. LINEAGE POWER 5 Product Option Sheet March 28, 2008 Eighth Brick Power Module Heat Sinks: ¼”, ½”, 1” Longitudinal and Transverse Heat Sinks Mechanical Outline 1” Transverse Dimensions are in inches Tolerances: x.xx in. ± 0.01 in. [unless otherwise indicated] x.xxx in ± 0.005 in. LINEAGE POWER 6 Product Option Sheet March 28, 2008 Eighth Brick Power Module Heat Sinks: ¼”, ½”, 1” Longitudinal and Transverse Heat Sinks Mechanical Outline 1” Longitudinal Dimensions are in inches Tolerances: x.xx in. ± 0.01 in. [unless otherwise indicated] x.xxx in ± 0.005 in. LINEAGE POWER 7 Product Option Sheet March 28, 2008 Eighth Brick Power Module Heat Sinks: ¼”, ½”, 1” Longitudinal and Transverse Heat Sinks Ordering Information Please contact your Lineage Power Sales Representative for pricing and availability. Table 1. Device Codes Product Code Description Screw Included Comcodes MHST02518Z ¼" Transverse Kit M3 x .5 x 4 mm CC848805004 MHSL02518Z ¼" Longitudinal Kit M3 x .5 x 4 mm CC848804947 MHST05018Z ½" Transverse Kit M3 x .5 x 5 mm CC848804971 CC848805012 MHSL05018Z ½" Longitudinal Kit M3 x .5 x 5 mm MHST10018Z 1" Transverse Kit M3 x .5 x 5 mm CC848804996 MHSL10018Z 1" Longitudinal Kit M3 x .5 x 5 mm CC848804988 -Z Indicates RoHS Compliant Versions Asia-Pacific Headquarters Tel: +65 6416 4283 World Wide Headquarters Lineage Power Corporation 3000 Skyline Drive, Mesquite, TX 75149, USA +1-800-526-7819 (Outside U.S.A.: +1-972-284-2626) www.lineagepower.com e-mail: [email protected] Europe, Middle-East and Africa Headquarters Tel: +49 89 6089 286 India Headquarters Tel: +91 80 28411633 Lineage Power reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. © 2008 Lineage Power Corporation, (Mesquite, Texas) All International Rights Reserved. Document No: PO08-002 ver. 1.2 PDF name: eighth_hs_po.pdf