HG4234A Automotive Miniature PCB Power Relay FEATURES 30A continuous current capacity Rough construction suitable for automotive uses Available with open, dust cover and sealed version TYPICAL AUTOMOTIVE APPLICATIONS Ventilation motor Power window Intermittent wiper Alarm system Inertia valve control Rear window heating Safety belt warning system CONTACT DATA 1 Form A (H) 60A 30A Form Make Break Max. Switching Current Material Initial Contact Resistance Max. Switching Voltage Max. Continuous Current Min. Load 30A Mechanical Service Life 1 Form B (D) 1 Form C (Z) 45A NO60A/NC30A 20A NO30A/NC15A AgNi0.15, AgCdO, AgSnOInO 100 mΩ max. at 0.1A, 6VDC 75VDC 20A NO30A/NC15A 0.1A, 12VDC 107 ops. 2 x 105 ops, see Note 4 Electrical COIL DATA Coil Voltage Code Nominal Voltage (VDC) Resistance (Ω) ±10% Must Operate Voltage max. ( VDC) Allowable Voltage ( VDC) Must Release Voltage min. ( VDC) 006 012 024 6 12 24 27 97 380 3.6 7.2 14.4 11.7 22.2 43.9 0.6 1.2 2.4 CHARACTERISTICS Operate Time Release Time Insulation Resistance Dielectric Strength Shock Resistance Vibration Resistance Drop Resistance Power Consumption Ambient Temperature Weight 9 ms. typical 7 ms. typical 100 MΩ, at 500 VDC, 50%RH 500 Vrms, 1 min. 20 g, 11ms. 10-40Hz: DA 1.27mm; 40-70Hz: 5 g; 70-100Hz: DA 0.5mm; 100-500Hz: 10 g. 1 M height drop on concrete (Covered types only) 1.5 W, approx. -40ºC to 125ºC operating; -40ºC to 155ºC storage Open: 20 g; Covered: 26 g, approx. ORDERING DESIGNATION Example: HG4234A / Model Coil Voltage Code Contact Form H: 1 Form A; D: 1 Form B; Z: 1 Form C Version Nil: Open; 1: Sealed; 2: Dust Cover Contact Material Nil: AgNi10; A: AgNi0.15; C: AgCdO; S: AgSnOInO Thermal Class Nil: UL Class B; F: UL Class F 012 - H 1 A F HG4234A 1/2 HG4234A OVERALL DIMENSIONS, MOUNTING HOLES AND WIRING DIAGRAMS (mm) Overall Dimensions Mounting Holes (Bottom View) Wiring Diagrams (Bottom View) NOTES 1. 2. 3. 4. 5. 6. 7. All parameters, unless otherwise specified, are measured at ambient temperature 23ºC. Maximum make current refers to inrush current of motor load. At ambient temperature of 85ºC, maximum allowable voltage should be reduced to 72%. Electrical life obtained at resistive or inductive load at 30A, 15VDC with suitable arc-suppression circuit attached with operating frequency of 1 ops/sec. In mounting holes drawing, the * hole is not needed for 1 Form A; the ** hole is not needed for 1 Form B. Custom-made services available with operational quantity. Please let us know your special requirements. Specifications subject to change without prior notice. DB LECTRO INC. 3600 boul. Matte suite I Brossard Qc J4Y-2Z2 TEL: (450)-444-1424 FAX: (450)-444-4714 HG4234A 2/2