HP HLMP-8109 T-13/4 super ultra-bright led lamp Datasheet

H
T-13/4 Super Ultra-Bright
LED Lamps
HLMP-8115
HLMP-8205
HLMP-8305
HLMP-8405
HLMP-8505
HLMP-8605
Technical Data
Features
Description
• Very High Intensity
• Narrow and Medium Viewing
Angles
• Untinted, Nondiffused Lens
• Choice of Five Colors
• Sturdy Leads with Seating
Plane Tabs
These untinted, nondiffused solid
state lamps are designed with
special internal optics to give a
very high luminous intensity
within a well defined viewing
angle. The LED materials used
within these devices is specifically
grown to assure the high light
output performance these lamps
provide.
HLMP-8109
HLMP-8209
HLMP-8309
HLMP-8409
HLMP-8509
Device Selection Guide
Part Number
Typical Luminous Intensity
(mcd @ 20 mA dc)
2θ1/2
Viewing Angle
DH AS AlGaAs
HLMP-8115
HLMP-8109
1000
500
10°
20°
High Efficiency Red
HLMP-8205
HLMP-8209
350
260
10°
20°
Yellow
HLMP-8305
HLMP-8309
350
260
10°
20°
Orange
HLMP-8405
HLMP-8409
350
260
10°
20°
High Performance Green
HLMP-8505
HLMP-8509
400
300
10°
20°
Emerald Green
HLMP-8605
75
10°
LED Color
2
Package Dimensions
Absolute Maximum Ratings at TA = 25°C
Yellow
High
Performance
Green/Emerald Green
Units
30
20
30
mA
300
90
60
90
mA
Average Forward Current
20
25
20
25
mA
Transient Forward Current[3]
(10 µs Pulse)
500
500
500
500
mA
5
5
5
5
V
110
110
110
110
°C
-20 to +100
°C
Parameter
DC Forward Current[1]
Peak Forward Current[2]
[2]
Reverse Voltage (IR = 100 µA)
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
DH AS
AlGaAs
Red
High
Efficiency Red
and Orange
30
-20 to +100
-55 to +100
-55 to +100
°C
260°C for 5 seconds
Notes:
1. See Figure 5 for maximum current derating vs. ambient temperature.
2. See Figure 6 for maximum peak current vs. pulse duration and allowable duty factor.
3. The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and
wire bond. Do not operate these lamps at peak currents above the Absolute Maximum Peak Forward Current.
3
Electrical/Optical Characteristics TA = 25°C
DH AS AlGaAs HLMP-8115/8109
Parameter
Symbol
Min.
Typ.
Luminous Intensity
HLMP-8115
HLMP-8109
Iv
500
200
1000
500
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Max.
Units
Test Conditions
mcd
IF = 20 mA
V
IF = 20 mA
15.0
V
IR = 100 µA
2θ1/2
10
20
Deg.
φd
120
mlm
IF = 20 mA
λPEAK
645
nm
Measured at Peak
λd
637
nm
∆λ1/2
20
nm
Speed of Response
τs
30
ns
Time Constant, e-t/τ
Capacitance
C
30
pF
VF = 0, f = 1 MHz
Thermal Resistance
RθJ-LEAD
210
°C/W
Luminous Efficacy[2]
ηv
80
lm/W
Included Angle Between
Half Intensity Points
HLMP-8115
HLMP-8109
Total Luminous Flux
Peak Wavelength
Dominant Wavelength
[1]
Spectral Line Half Width
1.8
5.0
2.2
LED Junction-toCathode Lead
High Efficiency Red HLMP-8205/8209
Parameter
Symbol
Min.
Typ.
Luminous Intensity
HLMP-8205
HLMP-8209
Iv
200
90
350
260
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Max.
Units
Test Conditions
mcd
IF = 20 mA
V
IF = 20 mA
30.0
V
IR = 100 µA
2θ1/2
10
20
Deg.
φv
45
mlm
IF = 20 mA
λPEAK
635
nm
Measured at Peak
λd
626
nm
∆λ1/2
40
nm
Speed of Response
τs
90
ns
Capacitance
C
11
pF
Thermal Resistance
RθJ-LEAD
210
°C/W
Luminous Efficacy[2]
ηv
145
lm/W
Included Angle Between
Half Intensity Points
HLMP-8205
HLMP-8209
Total Luminous Flux
Peak Wavelength
Dominant Wavelength
[1]
Spectral Line Half Width
1.9
5.0
2.6
VF = 0, f = 1 MHz
LED Junction-toCathode Lead
s
4
Yellow HLMP-8305/8309
Symbol
Min.
Typ.
Luminous Intensity
HLMP-8305
HLMP-8309
Parameter
Iv
212
96
350
260
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Max.
Units
Test Conditions
mcd
IF = 20 mA
V
IF = 20 mA
30.0
V
IR = 100 µA
2θ1/2
10
20
Deg.
φv
45
mlm
IF = 20 mA
λPEAK
583
nm
Measured at Peak
λd
585
nm
∆λ1/2
36
nm
Speed of Response
τs
90
ns
Capacitance
C
15
pF
Thermal Resistance
RθJ-LEAD
210
°C/W
Luminous Efficacy[2]
ηv
500
lm/W
Included Angle Between
Half Intensity Points
HLMP-8305
HLMP-8309
Total Luminous Flux
Peak Wavelength
[1]
Dominant Wavelength
Spectral Line Half Width
2.1
5.0
2.6
VF = 0, f = 1 MHz
LED Junction-toCathode Lead
Orange HLMP-8405/8409
Parameter
Symbol
Min.
Typ.
Luminous Intensity
HLMP-8405
HLMP-8409
Iv
200
90
350
260
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Included Angle Between
Half Intensity Points
HLMP-8405
HLMP-8409
2θ1/2
Units
Test Conditions
mcd
IF = 20 mA
V
IF = 20 mA
30.0
V
IR = 100 µA
10
20
Deg.
1.9
5.0
Max.
2.6
φv
45
mlm
IF = 20 mA
λPEAK
600
nm
Measured at Peak
Dominant Wavelength[1]
λd
602
nm
Spectral Line Half Width
∆λ1/2
40
nm
Speed of Response
τs
280
ns
Capacitance
C
4
pF
VF = 0, f = 1 MHz
Thermal Resistance
RθJ-LEAD
210
°C/W
LED Junction-toCathode Lead
Luminous Efficacy[2]
ηv
380
lm/W
Total Luminous Flux
Peak Wavelength
5
High Performance Green HLMP-8505/8509
Parameter
Luminous Intensity
HLMP-8505
HLMP-8509
Forward Voltage
Reverse Breakdown Voltage
Included Angle Between
Half Intensity Points
HLMP-8505
HLMP-8509
Total Luminous Flux
Peak Wavelength
Dominant Wavelength[1]
Spectral Line Half Width
Speed of Response
Capacitance
Thermal Resistance
Luminous Efficacy[2]
Symbol
Min.
Typ.
Iv
170
111
400
300
2.2
30
VF
VR
5.0
2θ1/2
Max.
3.0
Units
mcd
IF = 20 mA
V
V
IF = 20 mA
IR = 100 µA
λPEAK
λd
∆λ1/2
τs
C
RθJ-LEAD
10
20
115
568
570
28
260
18
210
mlm
nm
nm
nm
ns
pF
°C/W
ηv
595
lm/W
φv
Test Conditions
Deg.
IF = 20 mA
Measured at Peak
VF = 0, f = 1 MHz
LED Junction-toCathode Lead
Notes:
1. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in
candelas and ηv is the luminous efficacy in lumens/watt.
Emerald Green HLMP-8605[1]
Parameter
Luminous Intensity
HLMP-8605
Forward Voltage
Reverse Breakdown Voltage
Included Angle Between
Half Intensity Points
HLMP-8605
Peak Wavelength
Dominant Wavelength[2]
Spectral Line Half Width
Speed of Response
Capacitance
Thermal Resistance
Luminous Efficacy[3]
Symbol
Min.
Typ.
Max.
Units
Iv
VF
VR
69
75
2.2
30
3.0
mcd
V
V
5.0
2θ1/2
λPEAK
λd
∆λ1/2
τs
C
RθJ-LEAD
10
558
560
24
3100
35
210
Deg.
nm
nm
nm
ns
pF
°C/W
ηv
656
lm/W
Test Conditions
IF = 20 mA
IF = 20 mA
IR = 100 µA
Measured at Peak
VF = 0, f = 1 MHz
LED Junction-toCathode Lead
Notes:
1. Please refer to Application Note 1061 for information comparing standard green and emerald green light output degradation.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in
candelas and ηv is the luminous efficacy in lumens/watt.
6
1.0
ORANGE
RELATIVE INTENSITY
EMERALD GREEN
TA = 25° C
AlGaAs RED
HIGH
PERFORMANCE
GREEN
HIGH EFFICIENCY RED
0.5
YELLOW
0
500
550
600
650
700
750
WAVELENGTH – nm
Figure 1. Relative Intensity vs. Wavelength.
High Efficiency Red, Orange,
Yellow, and High
Performance Green
IF – FORWARD CURRENT – mA
100
HIGH
PERFORMANCE
GREEN,
EMERALD GREEN
80
HIGH
EFFICIENCY
RED/ORANGE
60
YELLOW
40
20
0
0
1.0
2.0
3.0
4.0
V F – FORWARD VOLTAGE – V
Figure 2. Forward Current vs. Forward Voltage (Non-Resistor Lamp).
Figure 3. Relative Luminous Intensity vs. Forward Current.
5.0
7
Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.
Figure 5. Maximum Forward dc Current vs. Ambient Temperature. Derating Based on TJ MAX = 110 °C.
Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings).
H
Figure 7. Relative Luminous Intensity vs. Angular Displacement. HLMP-8115/-8X05.
Figure 8. Relative Luminous Intensity vs. Angular Displacement. HLMP-8X09.
For technical assistance or the location of
your nearest Hewlett-Packard sales office,
distributor or representative call:
Americas/Canada: 1-800-235-0312 or
408-654-8675
Far East/Australasia: (65) 290-6305
Japan: (81 3) 3331-6111
Europe: Call your local HP sales office
listed in your telephone directory. Ask for
a Components representative.
Data subject to change.
Copyright © 1996 Hewlett-Packard Co.
Obsoletes 5091-8548E
Printed in U.S.A.
5964-9370E (4/96)
Similar pages