Aluminum Electrolytic Capacitors/ NHG Radial Lead Type Series: NHG Type: A ■ Features ● Endurance : 105 °C 1000 h to 2000 h ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance –55 °C to +105 °C 6.3 V.DC to 100 V.DC 0.1 µF to 22000 µF –25 °C to +105 °C 160 V.DC to 450 V.DC 1.0 µF to 330 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Which is greater) DC Leakage Current tan δ I < 0.06 CV +10 (µA) After 2 minutes Please see the attached standard products list After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration : 6.3 V.DC to 100 V.DC : (φ5 to φ8)=1000 hours, (φ10 to φ18)=2000 hours 160 V.DC to 450 V.DC : 2000 hours Endurance Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life ■ Frequency correction factor for ripple current W.V.(V.DC) Frequency (Hz) Cap. (µF) 60 0.1 to 6.3 to 100 47 1000 160 to 450 1 120 1k 10 k 100 k 33 0.75 1.00 1.55 1.80 2.00 470 0.80 1.00 1.35 1.50 1.50 to 22000 0.85 1.00 1.10 1.15 1.15 to 0.80 1.00 1.35 1.50 1.50 to 330 ■ Dimensions in mm (not to scale) (Unit : mm) Sleeve φ5 to φ8 φd±0.05 Pressure relief φ6.3< φ10< + L✽ 14 min. φD±0.5 3 min. F±0.5 – φD±0.5 ✽ L<16 : L±1.0 L>20 : L±2.0 Body Dia. φD 5 6.3 Lead Dia. φd 0.5 Lead space F 2.0 8 10 12.5 16 18 0.5 0.6 2.5 3.5 0.6 0.6 0.8 0.8 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-99 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ NHG ■ Standard Products Case size W.V. (V) 6.3 10 16 25 35 Cap. (±20 %) Dia. (µF) 220 470 1000 2200 3300 4700 6800 10000 15000 22000 330 470 1000 2200 3300 4700 6800 10000 15000 100 220 330 470 1000 2200 3300 4700 6800 10000 47 100 220 330 470 1000 2200 3300 4700 6800 47 100 220 330 470 1000 2200 3300 4700 (mm) 5 6.3 8 10 10 12.5 12.5 16 16 18 6.3 8 10 10 12.5 12.5 16 16 18 5 6.3 8 8 10 12.5 12.5 16 16 18 5 6.3 8 8 10 10 12.5 16 16 18 5 6.3 8 10 10 12.5 16 16 18 Specification Lead Length Ripple tan δ Endur- Lead Lead Space Current ance Dia. Length Taping Taping (120 Hz) (120 Hz) Straight ✽B ✽i (+105 °C) (+20 °C) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) 11 140 0.28 1000 0.5 2.0 5.0 2.5 11.2 230 0.28 1000 0.5 2.5 5.0 2.5 11.5 380 0.28 1000 0.6 3.5 5.0 16 710 0.30 2000 0.6 5.0 5.0 20 840 0.32 2000 0.6 5.0 5.0 20 1090 0.34 2000 0.6 5.0 5.0 25 1350 0.38 2000 0.6 5.0 5.0 25 1650 0.46 2000 0.8 7.5 7.5 31.5 2010 0.56 2000 0.8 7.5 35.5 2350 0.70 2000 0.8 7.5 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 11.5 250 0.24 1000 0.6 3.5 5.0 12.5 460 0.24 2000 0.6 5.0 5.0 20 760 0.26 2000 0.6 5.0 5.0 20 1000 0.28 2000 0.6 5.0 5.0 25 1260 0.30 2000 0.6 5.0 5.0 25 1570 0.34 2000 0.8 7.5 7.5 31.5 1890 0.42 2000 0.8 7.5 35.5 2180 0.52 2000 0.8 7.5 11 110 0.20 1000 0.5 2.0 5.0 2.5 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 11.5 260 0.20 1000 0.6 3.5 5.0 11.5 310 0.20 1000 0.6 3.5 5.0 16 560 0.20 2000 0.6 5.0 5.0 20 920 0.22 2000 0.6 5.0 5.0 25 1170 0.24 2000 0.6 5.0 5.0 25 1480 0.26 2000 0.8 7.5 7.5 31.5 1780 0.30 2000 0.8 7.5 35.5 2060 0.38 2000 0.8 7.5 11 91 0.16 1000 0.5 2.0 5.0 2.5 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 11.5 230 0.16 1000 0.6 3.5 5.0 11.5 310 0.16 1000 0.6 3.5 5.0 12.5 380 0.16 2000 0.6 5.0 5.0 20 680 0.16 2000 0.6 5.0 5.0 25 1090 0.18 2000 0.6 5.0 5.0 25 1400 0.20 2000 0.8 7.5 7.5 31.5 1750 0.22 2000 0.8 7.5 35.5 2040 0.26 2000 0.8 7.5 11 90 0.14 1000 0.5 2.0 5.0 2.5 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 11.5 270 0.14 1000 0.6 3.5 5.0 12.5 350 0.14 2000 0.6 5.0 5.0 16 460 0.14 2000 0.6 5.0 5.0 20 810 0.14 2000 0.6 5.0 5.0 25 1260 0.16 2000 0.8 7.5 7.5 31.5 1610 0.18 2000 0.8 7.5 35.5 1910 0.20 2000 0.8 7.5 Min. Packaging Q'ty Part No. ECA0JHG221( ) ECA0JHG471( ) ECA0JHG102( ) ECA0JHG222( ) ECA0JHG332( ) ECA0JHG472( ) ECA0JHG682( ) ECA0JHG103( ) ECA0JHG153 ECA0JHG223 ECA1AHG331( ) ECA1AHG471( ) ECA1AHG102( ) ECA1AHG222( ) ECA1AHG332( ) ECA1AHG472( ) ECA1AHG682( ) ECA1AHG103 ECA1AHG153 ECA1CHG101( ) ECA1CHG221( ) ECA1CHG331( ) ECA1CHG471( ) ECA1CHG102( ) ECA1CHG222( ) ECA1CHG332( ) ECA1CHG472( ) ECA1CHG682 ECA1CHG103 ECA1EHG470( ) ECA1EHG101( ) ECA1EHG221( ) ECA1EHG331( ) ECA1EHG471( ) ECA1EHG102( ) ECA1EHG222( ) ECA1EHG332( ) ECA1EHG472 ECA1EHG682 ECA1VHG470( ) ECA1VHG101( ) ECA1VHG221( ) ECA1VHG331( ) ECA1VHG471( ) ECA1VHG102( ) ECA1VHG222( ) ECA1VHG332 ECA1VHG472 Straight Taping Leads (pcs) 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 (pcs) 2000 2000 1000 500 500 500 500 250 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 500 250 2000 2000 1000 1000 500 500 500 250 2000 2000 1000 500 500 500 250 · When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-100 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ NHG ■ Standard Products Case size Specification Lead Length Ripple tan δ Endur- Lead Lead Space Cap. W.V. ance Dia. (±20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight ✽B ✽i (+105 °C) (+20 °C) (hours) (mm) (mm) (mm) (mm) (V) (µF) (mm) (mm) (mA r.m.s.) 50 63 100 0.1 5 11 0.22 5 0.33 5 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) 200 2000 1.1 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG0R1( ) 11 2.3 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR22( ) 200 2000 11 3.5 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR33( ) 200 2000 0.47 5 11 5 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR47( ) 200 2000 1 5 11 10 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG010( ) 200 2000 2.2 5 11 18 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG2R2( ) 200 2000 3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG3R3( ) 200 2000 4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG4R7( ) 200 2000 10 5 11 39 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG100( ) 200 2000 22 5 11 65 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG220( ) 200 2000 33 5 11 90 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG330( ) 200 2000 47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5 ECA1HHG470( ) 200 2000 100 8 11.5 180 0.12 1000 0.6 3.5 5.0 ECA1HHG101( ) 200 1000 220 10 12.5 300 0.12 2000 0.6 5.0 5.0 ECA1HHG221( ) 200 500 330 10 16 410 0.12 2000 0.6 5.0 5.0 ECA1HHG331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 ECA1HHG471( ) 200 500 5.0 ECA1HHG102( ) 200 500 ECA1HHG222 100 1000 12.5 25 950 0.12 2000 0.6 5.0 2200 16 31.5 1470 0.14 2000 0.8 7.5 3300 18 35.5 1770 0.16 2000 0.8 7.5 10 5 11 46 0.10 1000 0.5 2.0 ECA1HHG332 50 5.0 2.5 ECA1JHG100( ) 200 2000 22 5 11 71 0.10 1000 0.5 2.0 5.0 2.5 ECA1JHG220( ) 200 2000 33 6.3 11.2 100 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG330( ) 200 2000 47 6.3 11.2 120 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG470( ) 200 2000 100 10 12.5 215 0.10 2000 0.6 5.0 5.0 ECA1JHG101( ) 200 500 220 10 16 335 0.10 2000 0.6 5.0 5.0 ECA1JHG221( ) 200 500 330 10 20 510 0.10 2000 0.6 5.0 5.0 ECA1JHG331( ) 200 500 470 12.5 20 640 0.10 2000 0.6 5.0 5.0 ECA1JHG471( ) 200 500 1000 16 25 930 0.10 2000 0.8 7.5 7.5 ECA1JHG102( ) 100 250 2200 18 35.5 1610 0.12 2000 0.8 7.5 ECA1JHG222 50 0.47 5 11 9 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHGR47( ) 200 2000 1 5 11 14 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG010( ) 200 2000 2.2 5 11 21 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG2R2( ) 200 2000 3.3 5 11 31 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG3R3( ) 200 2000 4.7 5 11 38 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG4R7( ) 200 2000 10 6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG100( ) 200 2000 22 6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG220( ) 200 2000 · When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-101 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ NHG ■ Standard Products Case size Specification Lead Length Ripple tan δ Endur- Lead Lead Space Cap. W.V. ance Dia. (±20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight ✽B ✽i (+105 °C) (+20 °C) (hours) (mm) (mm) (mm) (mm) (V) (µF) (mm) (mm) (mA r.m.s.) 100 160 200 250 350 33 47 100 220 330 470 1000 1 2.2 3.3 4.7 10 22 33 47 100 220 330 1 2.2 3.3 4.7 10 22 33 47 100 220 1 2.2 3.3 4.7 10 22 33 47 100 1 2.2 3.3 4.7 10 22 33 47 100 8 10 10 12.5 16 16 18 6.3 6.3 6.3 6.3 10 10 10 12.5 16 16 18 6.3 6.3 6.3 8 10 10 12.5 12.5 16 18 6.3 6.3 8 8 10 12.5 12.5 12.5 16 6.3 8 10 10 10 12.5 16 16 18 11.5 12.5 20 25 25 25 35.5 11.2 11.2 11.2 11.2 12.5 20 20 20 25 31.5 31.5 11.2 11.2 11.2 11.5 16 20 20 20 25 31.5 11.2 11.2 11.5 11.5 16 20 20 25 31.5 11.2 11.5 12.5 16 20 20 25 25 31.5 130 165 265 440 540 715 985 17 25 36 43 70 130 180 220 335 540 705 17 25 36 50 80 140 190 220 335 575 17 29 42 50 88 155 190 230 365 18 31 38 50 82 130 195 230 375 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 3.5 5.0 5.0 5.0 7.5 7.5 7.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 2.5 2.5 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 3.5 3.5 5.0 5.0 5.0 5.0 7.5 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 Min. Packaging Q'ty Part No. ECA2AHG330( ) ECA2AHG470( ) ECA2AHG101( ) ECA2AHG221( ) ECA2AHG331( ) ECA2AHG471( ) ECA2AHG102 ECA2CHG010( ) ECA2CHG2R2( ) ECA2CHG3R3( ) ECA2CHG4R7( ) ECA2CHG100( ) ECA2CHG220( ) ECA2CHG330( ) ECA2CHG470( ) ECA2CHG101( ) ECA2CHG221 ECA2CHG331 ECA2DHG010( ) ECA2DHG2R2( ) ECA2DHG3R3( ) ECA2DHG4R7( ) ECA2DHG100( ) ECA2DHG220( ) ECA2DHG330( ) ECA2DHG470( ) ECA2DHG101( ) ECA2DHG221 ECA2EHG010( ) ECA2EHG2R2( ) ECA2EHG3R3 ECA2EHG4R7( ) ECA2EHG100( ) ECA2EHG220( ) ECA2EHG330( ) ECA2EHG470( ) ECA2EHG101 ECA2VHG010( ) ECA2VHG2R2( ) ECA2VHG3R3( ) ECA2VHG4R7( ) ECA2VHG100( ) ECA2VHG220( ) ECA2VHG330( ) ECA2VHG470( ) ECA2VHG101 Straight Taping Leads (pcs) (pcs) 200 200 200 200 100 100 50 200 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 200 100 200 200 200 200 200 200 100 100 50 1000 500 500 500 250 250 2000 2000 2000 2000 500 500 500 500 250 2000 2000 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 500 500 2000 1000 500 500 500 500 250 250 · When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-102 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ NHG ■ Standard Products Case size Specification Lead Length Ripple tan δ Endur- Lead Lead Space Cap. W.V. ance Dia. (±20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight ✽B ✽i (+105 °C) (+20 °C) (hours) (mm) (mm) (mm) (mm) (V) (µF) (mm) (mm) (mA r.m.s.) 1 400 450 2.5 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) 200 2000 6.3 11.2 18 0.24 2000 0.5 2.5 5.0 2.2 8 11.5 30 0.24 2000 0.6 3.5 5.0 ECA2GHG2R2( ) 200 1000 3.3 10 12.5 40 0.24 2000 0.6 5.0 5.0 ECA2GHG3R3( ) 200 500 ECA2GHG010( ) 4.7 10 16 50 0.24 2000 0.6 5.0 5.0 ECA2GHG4R7( ) 200 500 10 10 20 80 0.24 2000 0.6 5.0 5.0 ECA2GHG100( ) 200 500 22 12.5 25 145 0.24 2000 0.6 5.0 5.0 ECA2GHG220( ) 200 500 33 16 25 195 0.24 2000 0.8 7.5 7.5 ECA2GHG330( ) 100 250 47 16 31.5 250 0.24 2000 0.8 7.5 ECA2GHG470 100 1 8 11.5 18 0.24 2000 0.6 3.5 5.0 ECA2WHG010( ) 200 1000 2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 ECA2WHG2R2( ) 200 500 3.3 10 16 41 0.24 2000 0.6 5.0 5.0 ECA2WHG3R3( ) 200 500 4.7 10 20 49 0.24 2000 0.6 5.0 5.0 ECA2WHG4R7( ) 200 500 10 12.5 20 75 0.24 2000 0.6 5.0 5.0 ECA2WHG100( ) 200 500 22 16 25 115 0.24 2000 0.8 7.5 7.5 ECA2WHG220( ) 100 250 33 16 31.5 155 0.24 2000 0.8 7.5 ECA2WHG330 100 · When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-103 – 00 Nov. 2012