Document 587-1 Shielded Power Inductors – LPS6235 • Low DCR; high current; shielded construction • Perfect for backlight applications Designer’s Kit C345 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 460 – 480 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 350/7″reel; 1500/13″ reel Plastic tape: 16 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.68 mm pocket depth Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm PCB washing Only pure water or alcohol recommended Isat (A)5 Irms (A)6 DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20°C 40°C Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise LPS6235-682ML_ 6.8 LPS6235-822ML_ 8.2 LPS6235-103ML_ 10.0 LPS6235-123ML_ 12.0 LPS6235-153ML_ 15.0 LPS6235-183ML_ 18.0 LPS6235-223ML_ 22.0 LPS6235-333ML_ 33.0 LPS6235-473ML_ 47.0 LPS6235-563ML_ 56.0 LPS6235-683ML_ 68.0 LPS6235-823ML_ 82.0 LPS6235-104ML_ 100.0 LPS6235-124ML_ 120.0 LPS6235-154ML_ 150.0 LPS6235-224ML_ 220.0 LPS6235-334ML_ 330.0 LPS6235-474ML_ 470.0 LPS6235-564ML_ 560.0 LPS6235-684ML_ 680.0 LPS6235-824ML_ 820.0 LPS6235-105ML_ 1000.0 LPS6235-155ML_ 1500.0 LPS6235-185ML_ 1800.0 LPS6235-225ML_ 2200.0 LPS6235-335ML_ 3300.0 LPS6235-475ML_ 4700.0 LPS6235-565ML_ 5600.0 LPS6235-685ML_ 6800.0 LPS6235-825ML_ 8200.0 LPS6235-106ML_ 10000.0 0.075 0.095 0.100 0.110 0.125 0.140 0.145 0.180 0.245 0.280 0.345 0.315 0.375 0.435 0.535 0.820 1.20 1.60 2.00 2.20 2.70 3.40 4.60 5.42 6.70 9.50 14.5 16.4 21.4 24.5 29.5 55 48 37 29 25 24 24 16 13 12 10.8 10.0 9.0 8.3 7.3 5.6 4.4 3.6 3.1 2.8 2.5 2.2 1.9 1.7 1.5 1.1 0.94 0.86 0.80 0.70 0.61 2.6 2.5 2.3 1.9 1.9 1.7 1.6 1.3 1.1 1.0 0.90 0.46 0.46 0.44 0.37 0.31 0.26 0.22 0.20 0.17 0.16 0.14 0.12 0.11 0.090 0.080 0.070 0.060 0.057 0.052 0.050 2.7 2.6 2.4 2.2 2.0 1.8 1.7 1.4 1.2 1.0 0.94 0.52 0.52 0.48 0.43 0.36 0.29 0.25 0.22 0.19 0.18 0.17 0.13 0.12 0.11 0.090 0.077 0.070 0.065 0.060 0.055 2.8 2.7 2.5 2.3 2.0 1.9 1.7 1.5 1.2 1.1 0.96 0.55 0.54 0.51 0.45 0.37 0.30 0.26 0.23 0.21 0.19 0.18 0.14 0.13 0.11 0.10 0.084 0.080 0.069 0.067 0.060 1.30 1.30 1.28 1.25 1.22 1.20 1.10 1.00 0.80 0.75 0.73 0.72 0.70 0.60 0.53 0.45 0.40 0.32 0.29 0.28 0.26 0.24 0.19 0.18 0.16 0.14 0.11 0.10 0.090 0.085 0.075 1.90 1.85 1.80 1.75 1.70 1.65 1.60 1.30 1.15 1.07 1.00 0.95 0.90 0.80 0.73 0.64 0.50 0.43 0.38 0.37 0.33 0.30 0.26 0.23 0.22 0.180 0.150 0.130 0.120 0.115 0.095 1. Please specify termination and packaging codes: LPS6235-106MLC Termination: L = RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (350 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 587-1 Revised 12/01/11 Document 587-2 Shielded SMT Power Inductors – LPS6235 Series Typical L vs Current Typical L vs Frequency 10000 10000 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 1 0.01 1000 µH 1000 Inductance (µH) 1000 Inductance (µH) 3300 µH 0.1 330 µH 100 µH 100 33 µH 10 µH 10 Current (A) 1 10 Typical Current Derating 1 0.01 1 0.1 10 Frequency (MHz) 0.236 ±0.003* 6,00 ±0,076 100 XXX X 90 80 70 Dash number 60 0.236 ±0.003* 6,00 ±0,076 Winding direction Internal code 50 40 30 20 10 0 Isat Irms -40 -20 0 0.138 max** 3,50 25°C Percent of rated current 120 110 20 Recommended Land Pattern 40 60 80 100 120 140 0.079 2,00 0.165 4,20 Ambient temperature (°C) 0.039 typ 1,00 0.260 0.167 6,60 4,25 0.165 4,20 0.071 1,80 0.079 2,00 0.167 4,25 0.260 6,60 0.039 typ 1,00 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. **For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch (0,13 mm). Dimensions are in Document 587-2 inches mm Revised 12/01/11