DIODES GP50PF-1A

DIOTEC ELECTRONICS CORP
Data Sheet No. GP50PF-1A
18020 Hobart Blvd., Unit B
Gardena, CA 90248 U.S.A
Tel.: (310) 767-1052 Fax: (310) 767-7958
50 AMP PRESS FIT HIGH VOLTAGE DIODES (GPP DIE)
FEATURES
MECHANICAL SPECIFICATION
VOID FREE VACUUM DIE SOLDERING For Maximum
Mechanical Strength And Heat Dissipation
(Solder Voids: Typical < 2%, Max. < 5% of Die Area)
_ 0.002”
0.052” +
Full Silicon Die Area on P- and N-Sides Are Soldered to
Copper Slugs For Minimum Stress And Maximum Heat
Dissipation
1.00”
Min
Very Low Resistivity Silicon Die For Lower Operating
Junction Temperature
Very Low Reverse Current Leakage For Minimum Energy
Loss
MECHANICAL DATA
0.401”
0.385”
0.194”
0.184”
Press Fit Into Heat Sink to Further Enhance Heat
Handling Capability
0.173”
0.157”
0.505”/502”
OVER KNURL
0.012”
0.008”
GLASS PASSIVATED
SQUARE DIE
DT
GP5004A
0452
0.180”
Case: Nickel plated copper
ALL DIMENSIONS IN INCHES
Finish: All external surfaces are corrosion resistant
and the contact areas are readily weldable or
solderable
o
Maximum Soldering Temperature: 250 C, 0.25" from case
for 10 Seconds
Mounting Position: Any. Maximum force used for diode
insertion to be 12 KN
NT
70 Typ.
0.007”
0.005”
S
RoH
78 Places
Equally
Spaced
LIA
MP
O
C
Polarity: Color coded epoxy ring- ANODE on LEAD (Beige Ring):
Part No.=GP5002PFA/GP5004PFA. CATHODE on LEAD (Black Ring)
Part No.=GP5002PFC/GP5004PFC. Part No. marked on cap base.
MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS
Ratings at 25 °C ambient temperature unless otherwise specified.
PARAMETER (TEST CONDITIONS)
Series Number
Maximum Recurrent Peak Reverse Voltage
Working Peak Reverse Voltage
Maximum DC Blocking Voltage
Non-Repetitive Peak Reverse Voltage (Half Wave, 60 Hz, Single Phase)
Average Forward Rectified Current
Non-repetitive Peak Forward Surge Current
(Half wave, single phase, 60 Hz sine applied to rated load)
@ 50Amp DC (Typical)
Forward VoltageDrop
@ 100Amp DC (Typical)
Maximum DC Reverse Current at Rated Blocking Voltage Tc = 25 OC)
Junction Operating & Storage Temperature Range
RATINGS
SYMBOL
VRRM
VRWM
VDC
VRSM
IO
IFSM
IR
TJ,TSTG
UNITS
GP5002PFA
GP5002PFC
GP5004PFA
GP5004PFC
200
400
240
50
600
<1.05
<1.20
<1.0
-65 to +200
480
50
600
<1.05
<1.20
<1.0
-65 to +200
VOLTS
AMPS
VOLTS
mA
°C