BC856 ... BC860 BC856 ... BC860 Surface Mount General Purpose Si-Epi-Planar Transistors Si-Epi-Planar Universaltransistoren für die Oberflächenmontage PNP PNP Version 2015-05-12 Type Code 1 1.3±0.1 3 2.4 ±0.2 0.4 Power dissipation – Verlustleistung +0.1 1.1 -0.2 2.9 ±0.1 +0.1 -0.05 2 1.9 ±0.1 Dimensions - Maße [mm] 1=B 2=E 3=C 250 mW Plastic case Kunststoffgehäuse SOT-23 (TO-236) Weight approx. – Gewicht ca. 0.01 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Maximum ratings (TA = 25°C) Grenzwerte (TA = 25°C) BC856 BC857 BC860 BC858 BC859 Collector-Emitter-volt. – Kollektor-Emitter-Spannung B open - VCEO 65 V 45 V 30 V Collector-Base-voltage – Kollektor-Basis-Spannung E open - VCBO 80 V 50 V 30 V Emitter-Base-voltage – Emitter-Basis-Spannung C open - VEBO 5V Power dissipation – Verlustleistung Ptot 250 mW 1) Collector current – Kollektorstrom (dc) - IC 100 mA Peak Collector current – Kollektor-Spitzenstrom - ICM 200 mA Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS -55...+150°C -55…+150°C Characteristics (Tj = 25°C) Kennwerte (Tj = 25°C) Min. Typ. Max. DC current gain – Kollektor-Basis-Stromverhältnis - VCE = 5 V, - IC = 10 µA Group A Group B Group C HFE hFE hFE – – – 90 150 270 – – – - VCE = 5 V, - IC = 2 mA Group A Group B Group C HFE hFE hFE 125 220 420 180 290 520 250 475 800 - VCEsat - VCEsat – – – – 300 mV 650 mV - VBEsat - VBEsat – – 700 mV 900 mV – – Collector-Emitter saturation voltage – Kollektor-Sättigungsspannung 2) IC = 10 mA, IB = 0.5 mA IC = 100 mA, IB = 5 mA Base-Emitter saturation voltage – Basis-Sättigungsspannung 2) IC = 10 mA, IB = 0.5 mA IC = 100 mA, IB = 5 mA 1 2 Mounted on P.C. board with 3 mm2 copper pad at each terminal Montage auf Leiterplatte mit 3 mm2 Kupferbelag (Lötpad) an jedem Anschluss Tested with pulses tp = 300 µs, duty cycle ≤ 2% – Gemessen mit Impulsen tp = 300 µs, Schaltverhältnis ≤ 2% © Diotec Semiconductor AG http://www.diotec.com/ 1 BC856 ... BC860 Characteristics (Tj = 25°C) Kennwerte (Tj = 25°C) Min. Typ. Max. - VBE - VBE 600 mV – – – 750 mV 720 mV - ICBO - ICBO – – – – 15 nA 4 µA - IEBO – – 100 nA fT 100 MHz – – CCBO – – 4.5 pF CEB0 – 9 pF – F F – – 2 dB 1.2 dB 10 dB 4 dB Base-Emitter-voltage – Basis-Emitter-Spannung 2) - VCE = 5 V, IC = - 2 mA - VCE = 5 V, IC = - 10 mA Collector-Base cutoff current – Kollektor-Basis-Reststrom - VCB = 30 V, (E open) - VCE = 30 V, Tj = 125°C, (E open) Emitter-Base cutoff current - VEB = 5 V, (C open) Gain-Bandwidth Product – Transitfrequenz - VCE = 5 V, - IC = 10 mA, f = 100 MHz Collector-Base Capacitance – Kollektor-Basis-Kapazität - VCB = 10 V, IE =ie = 0, f = 1 MHz Emitter-Base Capacitance – Emitter-Basis-Kapazität - VEB = 0.5 V, IC = ic = 0, f = 1 MHz Noise figure – Rauschzahl - VCE = 5 V, - IC = 200 µA RG = 2 kΩ, f = 1 kHz, Δf = 200 Hz BC856 ... BC858 BC859 ... BC860 Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft RthA Recommended complementary NPN transistors Empfohlene komplementäre NPN-Transistoren Marking of available current gain groups Stempelung der lieferbaren Stromverstärkungsgruppen 2 1 2 < 420 K/W 1) BC846 ... BC850 BC856A = 3A BC856B = 3B BC856C = 3C BC857A = 3E BC857B = 3F BC857C = 3G BC858A = 3E BC858B = 3F BC858C = 3G BC860B = 3F BC860C = 3G or 4G BC859B = 3F BC859C = 3G or 4C Tested with pulses tp = 300 µs, duty cycle ≤ 2% – Gemessen mit Impulsen tp = 300 µs, Schaltverhältnis ≤ 2% Mounted on P.C. board with 3 mm2 copper pad at each terminal Montage auf Leiterplatte mit 3 mm2 Kupferbelag (Lötpad) an jedem Anschluss http://www.diotec.com/ © Diotec Semiconductor AG