MBRB2040CT THRU MBRB20200CT 20A Surface Mount High Power Schottky Barrier Rectifiers ■ Features ■ Outline • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Suffix "G" indicates Halogen-free part, ex.MBRB2040 CT G. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 D2PAK(TO-263) 2 0.370(9.40) 0.320(8.13) Marking code 1 3 0~0.012(0~0.30) 0.110(2.79) 0.090(2.29) 0.228(5.80) 0.173(4.40) ■ Mechanical data 0.190(4.83) 0.160(4.06) 0.055(1.40) 0.045(1.14) 0.067(1.70)MAX 0.411(10.45) 0.380(9.65) 0.055(1.40) 0.245(6.22) 0.031(0.80) MIN 0.063(1.60) 0.024(0.60) • Epoxy : UL94-V0 rated flame retardant. 0.024(0.60) 0.011(0.28) 0.205(5.20) 0.189(4.80) • Case : Molded plastic, TO-263 / D 2PAK • Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Indicated by cathode band . • Mounting Position : Any. • Weight : Approximated 1.70 gram . PIN 1 PIN 3 PIN 2 Dimensions in inches and (millimeters) ■ Maximum ratings and electrical characteristics Rating at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Conditions Symbol Forward rectified current See Fig.1 Forward surge current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) V R = V RRM T A = 25 OC Reverse current V R = V RRM T A = 125 C Thermal resistance TYP. MAX. UNIT IO 20 A I FSM 150 A 0.1 IR O Diode junction capacitance MIN. f=1MHz and applied 4V DC reverse voltage CJ Junction to ambient R θJA T STG Storage temperature Symbol Marking code Max. repetitive peak reverse voltage V RRM (V) Max. RMS voltage V RMS (V) Max. DC blocking voltage V R (V) MBRB2040CT MBRB2040CT 40 28 40 MBRB2045CT MBRB2045CT 45 31.5 45 MBRB2060CT MBRB2060CT 60 42 60 MBRB2065CT MBRB2065CT 65 45.5 65 Max. forward voltage @10A, T A = 25 OC V F (V) 10 150 pF O 30 -55 +175 C/W O C Max. Operating forward voltage temperature @10A, T A = 125 OC T J ( OC) V F (V) 0.70 0.57 0.79 0.70 MBRB20100CT MBRB20100CT 100 70 100 0.81 0.71 MBRB20150CT MBRB20150CT 150 105 150 0.87 0.77 MBRB20200CT MBRB20200CT 200 140 200 0.90 0.80 1 mA -55 ~ +150 -55 ~ +175 Document ID : DS-11K64 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C1 MBRB2040CT THRU MBRB20200CT 20A Surface Mount High Power Schottky Barrier Rectifiers ■ Rating and characteristic curves Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig.1 - Forward Current Derating Curve 150 24 Peak Forward Surge Current (A) Average Forward Current (A) RESISTIVE OR INDUCTIVE LOAD 20 16 MBRB2040CT~MBRB20100CT 12 8.0 MBRB20150CT~MBRB20200CT single phase half wave 60Hz resistive or inductive load 4.0 0 25 50 75 100 125 150 125 100 75 50 25 0 175 1 10 O Lead Temperature ( C) 100 Number of Cycles at 60 Hz Fig. 3.1 - Typical Instantaneous Forward Characteristics Fig. 3.2 - Typical Instantaneous Forward Characteristics 50 50 O T J=125 C MBRB2060CT MBRB20100CT MBRB2040CT Instantaneous Forward Current (A) Instantaneous Forward Current (A) 10 1 T J=25 OC 0.1 0.01 0.2 0.4 0.6 0.8 1.0 10 T J=25 OC 1.0 0.5 0 1.2 Instantaneous Forward Voltage (Volts) Instantaneous Reverse Current (mA) Instantaneous Forward Current (A) O T J=125 C T J=25 OC 0.8 1.0 0.6 0.8 1.0 10 T J=150 OC 1 T J=125 OC 0.1 0.01 1.2 T J=75 OC 0.001 T J=25 OC 0.0001 0 1 0.4 0.6 100 MBRB20150CT MBRB20200CT 0.2 0.4 Fig. 4 - Typical Reverse Characteristics 100 0 0.2 Instantaneous Forward Voltage (Volts) Fig. 3.3 - Typical Instantaneous Forward Characteristics 10 O T J=125 C 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage ( %) Instantaneous Forward Voltage (Volts) 2 Document ID : DS-11K64 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C1 MBRB2040CT THRU MBRB20200CT 20A Surface Mount High Power Schottky Barrier Rectifiers ■ D 2PAK(TO-263) foot print A G B C F D E A B C 0.425 (10.80) 0.665 (16.90) 0.374 (9.50) D E 0.071 (1.80) 0.098 (2.50) F G 0.138 (3.50) 0.449 (11.40) Dimensions in inches and (millimeters) ■ CITC reserves the right to make changes to this document and its products and specifications at any time without notice. ■ Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. ■ CITC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does CITC assume any liability for application assistance or customer product design. ■ CITC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. ■ No license is granted by implication or otherwise under any intellectual property rights of CITC. ■ CITC products are not authorized for use as critical components in life support devices or systems without express written approval of CITC. http://www.citcorp.com.tw/ Tel:886-3-5600628 Fax:886-3-5600636 Add:Rm. 3, 2F., No.32, Taiyuan St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) 3 Document ID : DS-11K64 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C1