TI1 LM747 Dual operational amplifier Datasheet

LM747
LM747 Dual Operational Amplifier
Literature Number: SNOS661
LM747
Dual Operational Amplifier
General Description
Features
The LM747 is a general purpose dual operational amplifier.
The two amplifiers share a common bias network and power
supply leads. Otherwise, their operation is completely independent.
Additional features of the LM747 are: no latch-up when input common mode range is exceeded, freedom from oscillations, and package flexibility.
The LM747C/LM747E is identical to the LM747/LM747A
except that the LM747C/LM747E has its specifications
guaranteed over the temperature range from 0§ C to a 70§ C
instead of b55§ C to a 125§ C.
Y
Y
Y
Y
Y
Y
No frequency compensation required
Short-circuit protection
Wide common-mode and differential voltage ranges
Low power consumption
No latch-up
Balanced offset null
Connection Diagrams
Dual-In-Line Package
Metal Can Package
TL/H/11479 – 5
TL/H/11479 – 4
Order Number LM747H
See NS Package Number H10C
Order Number LM747CN or LM747EN
See NS Package Number N14A
*V a A and V a B are internally connected.
C1995 National Semiconductor Corporation
TL/H/11479
RRD-B30M115/Printed in U. S. A.
LM747 Dual Operational Amplifier
November 1994
Absolute Maximum Ratings
Supply Voltage
LM747/LM747A
LM747C/LM747E
Indefinite
Operating Temperature Range
LM747/LM747A
LM747C/LM747E
g 22V
g 18V
Power Dissipation (Note 1)
Differential Input Voltage
g 15V
Input Voltage (Note 2)
Output Short-Circuit Duration
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
b 55§ C to a 125§ C
0§ C to a 70§ C
Storage Temperature Range
Lead Temperature (Soldering, 10 sec.)
800 mW
g 30V
b 65§ C to a 150§ C
300§ C
Electrical Characteristics (Note 3)
Parameter
Conditions
LM747A/LM747E
Min
Input Offset Voltage
TA e 25§ C
RS s 10 kX
RS s 50X
Typ
Max
0.8
3.0
RS s 50X
RS s 10 kX
TA e 25§ C, VS e g 20V
Input Offset Current
TA e 25§ C
5.0
Max
2.0
6.0
7.5
g 15
3.0
g 15
30
20
200
70
85
500
TA e 25§ C
TAMIN s TA s TAMAX
30
TA e 25§ C, VS e g 20V
1.0
VS e g 20V
0.5
80
0.3
2.0
TA e 25§ C
TA e 25§ C, RL t 2 kX
VS e g 20V, VO e g 15V
g 13
20
200
g 12
500
1.5
80
0.3
2.0
g 12
g 13
VS e g 20V
RL t 10 kX
RL t 2 kX
TA e 25§ C
50
200
20
200
32
Common-Mode
Rejection Ratio
RS s 10 kX, VCM e g 12V
RS s 50 kX, VCM e g 12V
15
V
V/mV
V/mV
10
V/mV
g 16
V
g 15
25
g 12
g 14
g 12
g 14
g 10
g 13
g 10
g 13
35
40
25
70
80
MX
V/mV
25
10
10
nA
mA
V/mV
VS e g 15V
RL t 10 kX
RL t 2 kX
Output Short
Circuit Current
500
0.8
g 13
50
VS e g 15V, VO e g 10V
VS e g 5V, VO e g 2V
nA
300
RL t 2 kX
VS e g 20V, VO e g 15V
mV
nA/§ C
80
0.210
6.0
mV
mV
0.5
VS e g 15V, VO e g 10V
Output Voltage Swing
Units
Typ
mV/§ C
g 10
g 12
Large Signal
Voltage Gain
1.0
Min
6.0
Average Input Offset
Current Drift
Input Voltage Range
Max
15
Input Offset Voltage
Adjustment Range
Input Resistance
LM747C
Typ
4.0
Average Input Offset
Voltage Drift
Input Bias Current
LM747
Min
95
2
90
25
70
90
V
mA
dB
Electrical Characteristics (Note 3) (Continued)
Parameter
Supply Voltage
Rejection Ratio
Conditions
VS e g 20V to VS e g 5V
RS s 50X
RS s 10 kX
Transient Response
Rise Time
Overshoot
TA e 25§ C, Unity Gain
Bandwidth (Note 4)
TA e 25§ C
Slew Rate
TA e 25§ C, Unity Gain
Supply Current/Amp
TA e 25§ C
Power Consumption/Amp
TA e 25§ C
VS e g 20V
VS e g 15V
LM747A
LM747E
LM747
LM747A/LM747E
Min
Typ
86
96
0.25
6.0
0.437
1.5
0.3
0.7
Max
0.8
20
Typ
77
96
LM747C
Max
Min
Typ
77
96
Units
Max
dB
0.3
5
0.3
5
ms
%
0.5
0.5
V/ms
MHz
2.5
80
LM747
Min
1.7
2.8
1.7
2.8
50
85
50
85
150
mA
mW
VS e g 20V
TA e TAMIN
TA e TAMAX
165
135
mW
VS e g 20V
TA e TAMIN
TA e TAMAX
150
150
150
mW
VS e g 15V
TA e TAMIN
TA e TAMAX
60
45
100
75
mW
Note 1: The maximum junction temperature of the LM747C/LM747E is 100§ C. For operating at elevated temperatures, devies in the TO-5 package must be
derated based on a thermal resistance of 150§ C/W, junction to ambient, or 45§ C/W, junction to case. The thermal resistance of the dual-in-line package is 100§ C/
W, junction to ambient.
Note 2: For supply voltages less than g 15V, the absolute maximum input voltage is equal to the supply voltage.
Note 3: These specifications apply for g 5V s VS s g 20V and b 55§ C s TA s 125§ C for the LM747A and 0§ C s TA s 70§ C for the LM747E unless otherwise
specified. The LM747 and LM747C are specified for VS e g 15V and b 55§ C s TA s 125§ C and 0§ C s TA s 70§ C, respectively, unless otherwise specified.
Note 4: Calculated value from: 0.35/Rise Time (ms).
Schematic Diagram (Each Amplifier)
TL/H/11479 – 1
Note: Numbers in parentheses are pin numbers for amplifier B. DIP only.
3
Typical Performance Characteristics
Input Bias and Offset
Currents vs Ambient
Temperature
DC Parameters
vs Supply Voltage
Common Mode Rejection
Ratio vs Frequency
Output Voltage Swing
vs Frequency
Output Voltage Swing
vs Load Resistance
Output Swing and
Input Range vs
Supply Voltage
Normalized DC Parameters
vs Ambient Temperature
Transient Response
Frequency Characteristics
vs Ambient Temperature
Frequency Characteristics
vs Supply Voltage
Output Resistance
vs Frequency
Open Loop Transfer
Characteristics vs Frequency
TL/H/11479 – 2
4
Typical Performance Characteristics
(Continued)
Input Resistance and
Input Capacitance
vs Frequency
Broadband Noise for
Various Bandwidths
Input Noise Voltage
and Current
vs Frequency
Voltage Follower Large
Signal Pulse Response
TL/H/11479 – 3
5
6
Physical Dimensions inches (millimeters)
Metal Can Package (H)
Order Number LM747H
NS Package Number H10C
7
LM747 Dual Operational Amplifier
Physical Dimensions inches (millimeters) (Continued)
Dual-In-Line Package (N)
Order Number LM747CN or LM747EN
NS Package Number N14A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose
failure to perform, when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
National Semiconductor
Europe
Fax: (a49) 0-180-530 85 86
Email: cnjwge @ tevm2.nsc.com
Deutsch Tel: (a49) 0-180-530 85 85
English Tel: (a49) 0-180-532 78 32
Fran3ais Tel: (a49) 0-180-532 93 58
Italiano Tel: (a49) 0-180-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Communications and Telecom www.ti.com/communications
Amplifiers
amplifier.ti.com
Computers and Peripherals
www.ti.com/computers
Data Converters
dataconverter.ti.com
Consumer Electronics
www.ti.com/consumer-apps
DLP® Products
www.dlp.com
Energy and Lighting
www.ti.com/energy
DSP
dsp.ti.com
Industrial
www.ti.com/industrial
Clocks and Timers
www.ti.com/clocks
Medical
www.ti.com/medical
Interface
interface.ti.com
Security
www.ti.com/security
Logic
logic.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and Automotive www.ti.com/automotive
Microcontrollers
microcontroller.ti.com
Video and Imaging
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
Wireless Connectivity
www.ti.com/wirelessconnectivity
TI E2E Community Home Page
www.ti.com/video
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
Similar pages