HDSM-291x/293x 0.28” (7.0mm) Dual digit surface mount LED display Data Sheet Description Features The HDSM-291x/293x is a dual digit display of 0.28” (7.0mm) height. This device utilizes AlInGaP / GaAs chips and has a grey surface with white segments. x 0.28” digit height x Low current operation x Excellent characters appearance x Available in CA and CC x 1000 pieces per reel x Moisture sensitivity level: Level 3 x RoHS compliant Ordering Information Red Green Yellow Orange Description HDSM-291C HDSM-291H HDSM-291F HDSM-291L Common Anode, Upper and Lower Decimal HDSM-293C HDSM-293H HDSM-293F HDSM-293L Common Cathode, Upper and Lower Decimal Package Dimensions Notes: All dimensions are in millimeters (inches). Tolerance: ± 0.25mm (0.01”) unless otherwise noted. Pin Connection (Common Anode) Pin Connection (Common Cathode) PIN No Connection PIN No Connection 1 CATHODE G 1 ANODE G 2 CATHODE DP2,DP4 2 ANODE DP2,DP4 3 CATHODE A 3 ANODE A 4 CATHODE F 4 ANODE F 5 COMMON ANODE DIG2 5 COMMON CATHODE DIG2 6 CATHODE D 6 ANODE D 7 CATHODE E 7 ANODE E 8 CATHODE C 8 ANODE C 9 CATHODE B 9 ANODE B 10 COMMON ANODE DIG1 10 COMMON CATHODE DIG 1 11 CATHODE DP1,DP3 11 ANODE DP1,DP3 Internal Circuit Diagram (Common Cathode) Internal Circuit Diagram (Common Anode) DIG1 10 A B 3 C 9 E D 8 6 A G DP1 DP2 F 7 DIG1 10 DIG2 5 4 1 11 B C D E F G DP1 DP2 A B 3 2 C 9 E D 8 6 DIG2 5 7 A G DP1 DP2 F 4 1 11 B C D E 2 Absolute Maximum Ratings @ TA=25° Parameter 2 Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linearly From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C F G DP1 DP2 Electrical / Optical Characteristics @ TA=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV Emissions Wavelength Op/Od 3.4 6 - mcd IF = 10mA - 572/571 - nm IF = 20mA Spectral Line Half-Width 'O - 20 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 Reverse Current, Per Segment IR - Luminous Intensity Matching Ratio IV-M - Parameters Symbol Average Luminous Intensity IV Emissions Wavelength 2.6 V IF = 20mA 100 PA VR = 5V - 2:1 - IF = 10mA Min Typ Max Unit Test Condition 3.4 8.0 - mcd IF = 10mA Op/Od - 591/589 - nm IF = 20mA Spectral Line Half-Width 'O - 15 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 Reverse Current, Per Segment IR - Luminous Intensity Matching Ratio IV-M - Parameters Symbol Average Luminous Intensity IV Emissions Wavelength Op/Od Spectral Line Half-Width 'O - 20 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.0 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 PA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 3.4 8.5 - mcd IF = 10mA Emissions Wavelength Op/Od - 611/605 - nm IF = 20mA Spectral Line Half-Width 'O - 20 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 PA VR = 5V Luminous Intensity Matching Ratio IV-M - 2:1 - IF = 10mA Yellow 2.6 V IF = 20mA 100 PA VR = 5V - 2:1 - IF = 10mA Min Typ Max Unit Test Condition 3.4 7.5 - mcd IF = 10mA - 632/624 - nm IF = 20mA Red Orange 3 - Typical Electrical / Optical characteristic curves @ TA=25°C Green G 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10MA) RELATIVE LUMINOUS INTENSITY 1.0 . 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 Figure 1. Relative Luminous Intensity vs. Wavelength 1 0 5 10 40 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 2 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 G G 30 20 10 20 10 0 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature 4 3 0 700 G 90 100 110 1.2 1.6 2.0 2.4 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Yellow 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 0 5 10 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 40 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 1 Figure 2. Relative Intensity vs. Forward Current 40 30 20 10 0 30 20 10 0 0 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE(°C) Figure 3. Allowable DC Current vs. Ambient Temperature 5 2 0 700 Figure 1. Relative Intensity vs. Wavelength 3 90 100 110 1.0 1.5 2.0 2.5 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 3.0 3.5 Red R 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE LUMINOUS INTENSITY 1.0 0.5 0 400 3 2 1 0 450 500 550 WAVELENGTH(nm) 600 650 700 Figure 1. Relative Luminous Intensity vs. Wavelength R 0 5 10 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current R 40 30 R 20 10 0 0 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE(°C) Figure 3. Allowable DC Current vs. Ambient Temperature 6 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 40 100 110 30 20 10 0 1.2 1.6 2.0 2.4 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Orange 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 450 2 1 0 500 550 600 650 WAVELENGTH(nm) 700 0 750 Figure 1. Relative Intensity vs. Wavelength 5 10 15 20 25 30 FORWARD CURRENT IF(mA) 35 40 45 50 Figure 2. Relative Intensity vs. Forward Current 40 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 40 30 20 10 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature 7 3 90 100 105 30 20 10 0 1.0 1.5 2.0 2.5 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 3.0 3.5 Intensity Bin Limits (mcd) Yellow / Red / Orange / Green IV Bin Category Min. Max L 3.401 5.400 M 5.401 8.600 N 8.601 13.700 P 13.701 21.800 Tolerance: ±15% Notes: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. Recommended soldering pattern (unit: mm) SMT Soldering Profile Pb free reflow soldering Profile 3 TEMPERATURE 10 - 30 SEC. 217°C 200°C 250°C 3°C/SEC. MAX. 2 3°C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Notes: 1. The peak temperature refers to the peak package body temperature. 2. Number of reflow process shall be limited to maximum 2 times only. Cooling process to normal temperature is required between first and second soldering process. 8 9 6°C/SEC. MAX. 150°C 2.54 x 5 = 12.7 Recommended stencil window opening is 80% 1.75 ± 0.1 Tape specification (unit: mm) 4.0 ± 0.1 Ø2.0 28.4 ± 0.1 32.00 +0.30 − 0.10 16.0 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-0981EN - March 17, 2011 4.0 ± 0.1