EGP15A THRU EGP15M INTERED GLASS PASSIVATED 50V-1000V 1.5A JUNCTION HIGH EFFICIENT RECTIFIER FEATURES * * * * * * * GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Superfast recovery time for high efficiency Low forward voltage , high current capability Low leakage current High surge current capability o High temperature soldering guaranteed: 260 C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 MECHANICAL DATA Case : JEDEC DO-204AC molded plastic over glass body Terminals : Plated axial leads , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.015 ounes , 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o EGP15 Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. A B D F G J K M UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 210 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 300 400 600 800 1000 Volts Maximum average forward rectified current I (AV) Amps 1.5 0.375" (9.5mm) lead length (SEE FIG.1) Peak forward surge current 8.3ms single half sine-wave IFSM 50 45 Amps 1.7 Volts superimposed on rated load (JEDEC Method) VF Maximum instantaneous forward voltage at 1.5 A o TA=25 C o TA=125 C o TA=150 C 1.0 1.25 IR 5 30 80 5 80 - uA Maximum reverse recovery time (NOTE 1) trr 50 75 nS Typical junction capacitance (NOTE 2) CJ 35 R JA R JL 40 15 Maximum DC reverse current at rated DC blocking voltage Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TJ,TSTG -65 to +175 pF o -55 to +150 C/W o C NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com EGP15A THRU EGP15M INTERED GLASS PASSIVATED 50V-1000V 1.5A JUNCTION HIGH EFFICIENT RECTIFIER RATINGS AND CHARACTERISTICS CURVES EGP15A THRU EGP15M FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.50 RESISTIVE OR INDUCTIVE LOAD 1.25 1.00 EGP15A~EGP15G EGP15J~EGP15M 0.75 0.50 0.25 0.375" (9.5mm) LEAD LENGTH 0 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 EGP15A~EGP15G EGP15J~EGP15M 20 10 0 0 25 50 75 100 125 150 1 175 10 FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 PULSE WIDTH=300uS 1% DUTY CYCLE INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 10.00 1.00 0.10 0.01 0.2 EGP15J~EGP15M EGP15G EGP15A~EGP15F 0.4 0.6 0.8 1.0 1.2 1.4 1.6 10 1 o TJ=125 C o TJ=150 C 0.1 0 TRANSIENT THERMAL IMPEDANCE( C/W) 60 40 20 10 6 4 2 1 .4 1.0 2 4 10 20 40 100 80 100 110 FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 1 0.1 0.01 0.10 1.0 10 100 t , PULSE DURATION, sec REVERSE VOLTAGE, VOLTS E-mail: [email protected] 60 o JUNCTION CAPACITANCE, pF o TJ = 25 C 100 .2 40 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 200 20 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS .1 100 NUMBER OF CYCLES AT 60Hz o AMBIENT TEMPERATURE, C 2 of 2 Web Site: www.taychipst.com