MBR(F,B)10H90 & MBR(F,B)10H100 Vishay General Semiconductor High-Voltage Schottky Rectifier High Barrier Technology for Improved High Temperature Performance TO-220AC FEATURES • Guardring for overvoltage protection ITO-220AC • Lower power losses, high efficiency • Low forward voltage drop • Low leakage current 2 2 1 1 MBR10H90 MBR10H100 MBRF10H90 MBRF10H100 PIN 1 PIN 1 CASE PIN 2 PIN 2 • High forward surge capability • High frequency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) TO-263AB K • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 2 TYPICAL APPLICATIONS 1 MBRB10H90 MBRB10H100 PIN 1 PIN 2 K HEATSINK For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 90 V, 100 V IFSM 250 A VF 0.64 V IR 4.5 µA TJ max. 175 °C Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR10H90 MBR10H100 UNIT Maximum repetitive peak reverse voltage VRRM 90 100 V Working peak reverse voltage VRWM 90 100 V Maximum DC blocking voltage VDC 90 100 V Maximum average forward rectified current IF(AV) 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 250 A Peak repetitive reverse current at tp = 2 µs, 1 kHz IRRM 0.5 A Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Document Number: 88667 Revision: 07-May-08 dV/dt 10 000 V/µs TJ, TSTG - 65 to + 175 °C VAC 1500 V For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 MBR(F,B)10H90 & MBR(F,B)10H100 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 10 A IF = 10 A IF = 20 A IF = 20 A Maximum instantaneous forward voltage (1) Maximum reverse current at working peak reverse voltage (1) SYMBOL VALUE UNIT TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C VF 0.77 0.64 0.88 0.73 V TJ = 25 °C TJ = 125 °C IR 4.5 6.0 µA mA Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR MBRF MBRB UNIT RθJC 2.7 5.8 2.7 °C/W Typical thermal resistance ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC MBR10H100-E3/45 1.80 45 50/tube Tube ITO-220AC MBRF10H100-E3/45 1.94 45 50/tube Tube TO-263AB MBRB10H100-E3/45 1.33 45 50/tube Tube TO-263AB MBRB10H100-E3/81 1.33 81 800/reel Tape and reel TO-220AC MBR10H100HE3/45 (1) 1.80 45 50/tube Tube ITO-220AC MBRF10H100HE3/45 (1) 1.94 45 50/tube Tube TO-263AB MBRB10H100HE3/45 (1) 1.33 45 50/tube Tube TO-263AB (1) 1.33 81 800/reel Tape and reel MBRB10H100HE3/81 Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 20 300 Peak Forward Surge Current (A) Average Forward Current (A) Resistive or Inductive Load 16 MBR MBRB 12 8 4 MBRF TJ = TJ Max. 8.3 ms Single Half Sine-Wave 250 200 150 100 50 0 0 50 0 100 150 180 1 100 10 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88667 Revision: 07-May-08 MBR(F,B)10H90 & MBR(F,B)10H100 Vishay General Semiconductor 10 000 TJ = 175 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 125 °C TJ = 150 °C TJ = 100 °C 1.0 TJ = 25 °C 0.1 0.01 0.1 100 10 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 10 000 TJ = 150 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 1000 TJ = 125 °C 1000 TJ = 100 °C 100 10 1 0.1 TJ = 25 °C 0.01 20 40 60 80 100 10 1 0.1 0.01 0.1 1 10 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Figure 6. Typical Transient Thermal Impedance Document Number: 88667 Revision: 07-May-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 MBR(F,B)10H90 & MBR(F,B)10H100 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 7° REF. 0.191 (4.85) 0.171 (4.35) CASE 0.037 (0.94) 0.027 (0.68) 7° REF. 2 1 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.671 (17.04) 0.651 (16.54) PIN 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 7° REF. 0.076 (1.93) REF. 45° REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88667 Revision: 07-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1