Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3112171310 Item: NP12-1A66-2500-210 NP12-1A71-2500-210 Coil Data at 20 °C Conditions Min Typ Conditions Min Typ Max Unit Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 66 Contact-form Contact rating Switching voltage (>20 AT) Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (>20 AT) Operate time incl. bounce Release time Capacity Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Sealing compound Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning A not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! "# Start Value & % ' Start Value $ % !"! % ! & RH <45 %, 100 VDC test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ( )* Conditions Min Typ Max RH <45%, 200 VDC Messspannung gemäß IEC 255-5 Unit ( + Metal Type PU E8702 FW-Z/W Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz . . Wellenlöten max. 5 sec fully sealed / Unit , , - Modifications in the sense of technical progress are reserved Designed at: 28.06.06 Designed by: WKOVACS Approval at: 10.07.08 Approval by: DSTASTNY Last Change at: 10.07.08 Last Change by: DSTASTNY Approval at: 28.10.08 Approval by: KOLBRICH Version: 01