L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only FEATURES * Isolation voltage between input and output Viso : 5,000Vrms * 6pin DIP photocoupler, triac driver output January 2010 * High repetitive peak off-state voltage VDRM : Min. 600V * High critical rate of rise of off-state voltage ( dv/dt : MIN. 1000V / µs ) * Dual-in-line package : MOC3052 * Wide lead spacing package : MOC3052M * Surface mounting package : MOC3052S * Tape and reel packaging : MOC3052S-TA1 * Safety approval UL / CSA / FIMKO / VDE* approved *Required “V” ordering option APPLICATIONS * Incandescent Lamp Dimmers * Interfacing Microprocessors to 115 and 240 Vac Peripherals * Lamp Ballasts * Motor Controls * Solid State Relays * Static AC Power Switch * Solenoid / Valve Controls * Temperature Controls Part No. : MOC3052 SERIES BNS-OD-C131/A4 Page : 1 of 8 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only OUTLINE DIMENSIONS Dual-in-line package : Wide lead spacing package: *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked. (Z : Taiwan, Y : Thailand, X : China-TJ, W : China-CZ) *4. Model No.: MOC3052 Part No. : MOC3052 SERIES BNS-OD-C131/A4 Page : 2 of 8 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only OUTLINE DIMENSIONS Surface mounting package : *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked. (Z : Taiwan, Y : Thailand, X : China-TJ, W : China-CZ) *4. Model No.: MOC3052 Part No. : MOC3052 SERIES BNS-OD-C131/A4 Page : 3 of 8 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only TAPING DIMENSIONS Tape and reel package : MOC3052S-TA1 Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : MOC3052 SERIES BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 16 ± 0.3 ( .63 ) 4 ± 0.1 ( .15 ) 7.5 ± 0.1 ( .295 ) 2 ± 0.1 ( .079 ) 12 ± 0.1 ( .472 ) Page : 4 of 8 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation PD 100 mW Off-State Output Terminal Voltage VDRM 600 V Peak Repetitive Surge Current ( PW=100µs, 120pps ) ITSM 1 A PC 300 mW Ptot 330 mW Viso 5,000 Vrms Ambient Operating Temperature Range TA -40 ~ +100 °C Storage Temperature Range Tstg -55 ~ +150 °C TL 260 °C INPUT OUTPUT Collector Power Dissipation Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector, emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : MOC3052 SERIES BNS-OD-C131/A4 Page : 5 of 8 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Forward Voltage VF — 1.2 1.4 V IF=20mA Reverse Current IR — 0.05 10 µA VR=6V *1 Peak Blocking Current, Either Direction IDRM — — 100 nA VDRM = 600V Peak On-State Voltage, Either Direction VTM — — 3.0 V ITM=100 mA Peak dv/dt 1000 — — V/µs Led Trigger Current, Current Required to Latch Output, Either Direction IFT — — 10 mA Holding Current, Either Direction IH — 400 — µA INPUT OUTPUT *2 Critical rate of Rise of Off-State Voltage *3 COUPLED Main Terminal Voltage = 3V *1 Test voltage must be applied within dv/dt rating. *2 This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only. *3 All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies between max 10mA for MOC3052 and absolute max IF (50mA) Part No. : MOC3052 SERIES BNS-OD-C131/A4 Page : 6 of 8 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 On-state Current vs. Ambient Temperature 50 ITM , on-state current (A) Forward current I F (mA) 60 40 30 20 10 0 -40 -20 0 0.10 0.05 0 -40 -20 20 40 60 80 100 120 o 20 40 60 80 100 120 Ambient temperature Ta ( C) Fig.3 Minimum Trigger Current vs. Ambient Temperature Fig.4 Forward Current vs. Forward Voltage 10 100 VP= 6V RL= 100 8 Forward current I F (mA) Minimum trigger current I FT (mA) 0 o Ambient temperature Ta ( C) 6 4 2 0 o o 60 C o 40 oC 20 C 80 C o 100 C 10 1 20 40 60 80 0.4 100 o Ambient temperature ( C) 0.8 1.2 1.6 Fig.5 On-state Voltage vs. Ambient Temperature Fig.6 Holding Current vs. Ambient Temperature 3.0 1 2.6 VP= 6V Forward current I H (mA) On-state voltage VTM(V) I TM= 100mA 2.2 1.8 1.4 1.0 0.1 0.01 20 40 60 80 100 o Ambient temperature Ta ( C) Part No. : MOC3052 SERIES BNS-OD-C131/A4 2.0 Forward voltage VF (V) 20 40 60 80 100 o Ambient Temperature Ta ( C) Page : 7 of 8 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only CHARACTERISTICS CURVES RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : MOC3052 SERIES BNS-OD-C131/A4 Page : 8 of 8