y ar in Pr el im DRS1 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧UNIVERSAL INPUT 85~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧HIGH EFFICIENCY UP TO 86% ‧HIGH AVERAGE EFFICIENCY MEET ErP ‧LOW STANDBY POWER CONSUMPTION ‧3 YEARS WARRANTY C a US UL 60950-1 IND. CONT. EQ. UL 508 EN 60950-1 MODEL LIST DRS1- 24 x BLANK : SPRING TERMINAL TYPE A : SCREW TERMINAL TYPE 05 : 05V OUT 12 : 12V OUT 24 : 24V OUT MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE EFF. (min.) EFF. (typ.) EFF. (avg.) 4A 80% 82% 82% OUTPUT CURRENT Single Output Models DRS1-05(A) 85~264 VAC 20 WATTS + 5 VDC DRS1-12(A) 85~264 VAC 24 WATTS + 12 VDC 2A 83% 85% 83% DRS1-24(A) 85~264 VAC 30 WATTS + 24 VDC 1.25 A 84% 86% 85% max. max. unit unit SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed GENERAL Conditions Conditions Characteristics Switching frequency Isolation voltage min. min. Vi nom, Io nom Input-Output 3,000 / 4,242 KHz VAC / VDC Input-FG 1,500 / 2,121 VAC / VDC 500 / 710 VAC / VDC 65 Output-FG Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom Derating (see derating curve) Storage temperature Relative humidity + 71 Vi nom, from +51 oC to +71 oC Non operational -40 + 85 Vi nom, Io nom 20 95 Vi nom, Io min MTBF Bellcore Issue 6 @40oC, GB Dimension Cooling Installation position Pollution degree www.chinfa.com 2016.02.19 100 -25 Temperature coefficient Altitude during operation typ. typ. 2.5 ± 0.03 MΩ o C % / oC o C % RH % / oC 5V 704,000 Hours 12V 721,000 Hours 24V 764,000 EN 60950-1 Spring & Screw terminal type 5,000 L90 x W22.5 x D100 Hours m mm Free air convection Vertical ( other direction may derating using ) 2 [email protected] P1 DRS1 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Rated input voltage Conditions Absolute input max. range Io nom Ta min ... Ta max, Io nom Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 85 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Power dissipation Vi : 115 / 230 VAC , Io nom Leakage current Standby power consumption AC in DC in typ. max. unit 100 240 VAC 85 120 264 375 VAC VDC min. 335 / 210 mA 47 Vi : 230 VAC, Io nom 750 mA 63 20 / 40 Hz A 5V 12V 5.0 W 4.9 W 24V 5.7 W Input-Output 0.25 mA Input-FG 3.5 0.3 mA max. unit +1 % ±1 % % Vi nom, Io = 0A W OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Vi nom, 0.8 Io nom Voltage trim range Rated continuous loading Vi nom 4.5 ±1 5.5 % 5V 12V 11.4 15.6 V 24V 22.5 Vi : 115 / 230 VAC , Io nom Turn on time Vi nom, Io nom Vi nom, Io nom Rise time Vi nom, Io nom Vi nom, Io nom V 5V 28.5 4 A @ 5Vdc / 3.6 A @ 5.5 Vdc 12V 2 A @ 12Vdc / 1.6 A @ 15 Vdc V 1.25 A @ 24Vdc / 1 A @ 28.5 Vdc 24V Hold up time typ. ms 20 / 50 with 3500μF CAP 1,000 ms 1,500 ms 150 ms 500 ms with 3500μF CAP Fall time Transient recovery time Vi nom, Io nom 150 ms Vi nom, 1~0.5 Io nom Ripple & noise Vi nom, Io nom, BW = 20MHz Vi nom, Io nom 1 second 2 100 mV Power back immunity Capacitor load Vi nom, Io nom DC ON indicator threshold at start up (Green LED) Vi nom, Io nom 5V 7.5 VDC 12V 22 VDC 24V 35 3,500 VDC 縘F 5V 4.0 4.5 VDC 12V 9.6 10.8 VDC 24V Efficiency ms Vi nom, Io nom, Po / Pi VDC 19.2 21.6 Up to 86%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection Rated over load protection Over voltage protection Vi nom, 0.8 Io nom (Auto Recovery) Degree of protection www.chinfa.com 2016.02.19 max. unit T2A / 250VAC internal IEC 61000-4-5 Vi nom (see typ current limited curve) Output short circuit typ. Varistor 140 5V % 6.5 12V 16.2 24V 28.8 8.5 VDC 18 VDC 32.4 Hiccup mode VDC IP20 [email protected] P2 DRS1 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 508 Listed cTUVUS UL 60950-1 TUV EN 60950-1 CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 90 x 22.5 x 100 mm (3.6 x 0.89 x 3.94 inches) Case material Weight Plastic 140 g Packing 0.15 kg ; 60 / 10 kg / 2.16 CUFT MECHANISM & PIN CONFIGURATION CONSTRUCTION mm [inch] 22.50 [0.89] 22.50 [0.89] 2 1 2 1 24VDC / 1.25A 100 [3.94] INSTALLATION Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range Spring terminal: AWG24-14 (0.2~2mm2 ) flexible / solid cable, 10 m/m stripping at cable end recommends Screw terminal: AWG26-12 (0.2~2.5mm2 ) flexible / solid cable, connector can withstand torque at maximum 5 pound-inches. 4-5 m/m stripping at cable end recommends Use copper conductors only, 60 / 75oC 24VDC / 1.25A Vout ADJ. 90.00 [3.60] 90.00 [3.60] Vout ADJ. 100-240VAC 0.75A 47-63Hz Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safeIy and firmly on the rail. 100-240VAC 0.75A 47-63Hz GENERAL TOLERANCE 3 4 5 3 4 5 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] PIN ASSIGNMENT Designation 1 2 OUT PIN NO. Positive output terminal V - Negative output terminal Ground this terminal to minimize high-frequency emissions IN 3 4 OTHER 5 www.chinfa.com 2016.02.19 Description V+ N Input terminals (neutral conductor, no polarity at DC input) L Input terminals (phase conductor, no polarity at DC input) DC ON Operation indicator LED Vout ADJ. Trimmer-potentiometer for Vout adjustment [email protected] P3 DRS1 SERIES CIRCUIT SCHEMATIC ‧Block diagram for DRS1 series L Fuse Vo + Rectifier Inrush Current Switching Limiter and Device Rectifier Line Filter Vo - N Y Control Circuit Opto Isolation Reference & Error Amp. Vout ADJ. Output Level Detection DC ON (Green LED) TYP. CURRENT LIMITED CURVE Output Voltage [ % ] v DRS1 Hiccup mode 100 50 t Time DERATING CURVE 100 Power out [ % ] Power out [ % ] 100 50 Safe Operating Area 85 Safe Operating Area Ta=40 oC o Ta=50 C 0 -25 o 51 71 0 85 100 264 Input Voltage [ VAC ] Temperature [ C ] TYP. EFFICIENCY CURVE Efficiency [ % ] DRS1-24 88 86 84 82 80 78 76 74 72 70 230 Vac 115 Vac 10 25 50 75 100 Power out [ % ] www.chinfa.com 2016.02.19 [email protected] P4