VDE TV-10/TV-15 rated 1a 30A, 2a 20A power relays HE HE RELAYS FEATURES 4. Compatible with all major safety standards UL, CSA, VDE and TÜV certified 5. Terminals are available 1. Excellent resistance to contact welding Owing to the pre-tension and kick-off mechanism, the 1 Form A passes TV-15 and the 2 Form A passes TV-10. 2. High-capacity and long life Contact arrangement Contact capacity Electrical life (at 20 times/min.) Mechanical life (at 180 times/min.) 1 Form A Plug-in type RoHS compliant TYPICAL APPLICATIONS 1 Form A type 2 Form A type 30A 1. Office equipment Copiers, package air conditioners, automatic vending machines. 2. Industrial equipment Machine tools, molding equipment, wrapping machines, food processing equipment, etc. 3. Home appliances Air conditioners, microwave ovens, televisions, stereo systems, water heaters and air heating equipment. 20A 2×105 DC type: 107, AC type: 5×106 3. Excellent surge resistance Between contacts and coil, the surge voltage is more than 10,000 V (when surge waveform accords with JEC-212-1981). Single side stable type HE 1 Form A, 2 Form A Min. 8 mm 1 Form A and 2 Form A: PC board type: Min. 3 mm Min. 2.5 mm Type Insulation gap Distance between contacts* Breakdown voltage Between open contacts Between contact and coil 2, 000 Vrms for 1 min. 5, 000 Vrms for 1 min. * Reference value CLASSIFICATION Type Operating funciton Contact arrangement PC board 1 Form A Plug-in 1 Form A 2 Form A TM Single side stable 1 Form A Screw terminal 2 Form A 1 Form A 2 Form A ORDERING INFORMATION HE HE Relay Contact arrangement 1a: 1 Form A (Single side stable type) 2a: 2 Form A (Single side stable type) Pick-up voltage N: 70% of nominal voltage Terminals Nil: Plug-in type S: Screw terminal type Q: TM type P: PC board type Nominal coil voltage DC 6, 12, 24, 48, 100, 110 V AC 12, 24, 48, 100 (100/120), 200 (200/240) V ASCTB183E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ HE TYPES 1. PC board type (1 Form A, DC coil) (Single side stable) 1 Form A Part No. HE1aN-P-DC6V HE1aN-P-DC12V HE1aN-P-DC24V HE1aN-P-DC48V HE1aN-P-DC100V HE1aN-P-DC110V Nominal coil voltage 6V DC 12V DC 24V DC 48V DC 100V DC 110V DC Standard packing: Carton: 25 pcs.; Case: 100 pcs. 2. Plug-in type (Single side stable) Type DC type AC type Nominal coil voltage 6V DC 12V DC 24V DC 48V DC 100V DC 110V DC 12V AC 24V AC 48V AC 100/120V AC 200/240V AC 1 Form A Part No. HE1aN-DC6V HE1aN-DC12V HE1aN-DC24V HE1aN-DC48V HE1aN-DC100V HE1aN-DC110V HE1aN-AC12V HE1aN-AC24V HE1aN-AC48V HE1aN-AC100V HE1aN-AC200V 2 Form A Part No. HE2aN-DC6V HE2aN-DC12V HE2aN-DC24V HE2aN-DC48V HE2aN-DC100V HE2aN-DC110V HE2aN-AC12V HE2aN-AC24V HE2aN-AC48V HE2aN-AC100V HE2aN-AC200V 1 Form A Part No. HE1aN-Q-DC6V HE1aN-Q-DC12V HE1aN-Q-DC24V HE1aN-Q-DC48V HE1aN-Q-DC100V HE1aN-Q-DC110V HE1aN-Q-AC12V HE1aN-Q-AC24V HE1aN-Q-AC48V HE1aN-Q-AC100V HE1aN-Q-AC200V 2 Form A Part No. HE2aN-Q-DC6V HE2aN-Q-DC12V HE2aN-Q-DC24V HE2aN-Q-DC48V HE2aN-Q-DC100V HE2aN-Q-DC110V HE2aN-Q-AC12V HE2aN-Q-AC24V HE2aN-Q-AC48V HE2aN-Q-AC100V HE2aN-Q-AC200V 1 Form A Part No. HE1aN-S-DC6V HE1aN-S-DC12V HE1aN-S-DC24V HE1aN-S-DC48V HE1aN-S-DC100V HE1aN-S-DC110V HE1aN-S-AC12V HE1aN-S-AC24V HE1aN-S-AC48V HE1aN-S-AC100V HE1aN-S-AC200V 2 Form A Part No. HE2aN-S-DC6V HE2aN-S-DC12V HE2aN-S-DC24V HE2aN-S-DC48V HE2aN-S-DC100V HE2aN-S-DC110V HE2aN-S-AC12V HE2aN-S-AC24V HE2aN-S-AC48V HE2aN-S-AC100V HE2aN-S-AC200V Standard packing: Carton: 20 pcs.; Case: 100 pcs. 3. TM type (Single side stable) Type DC type AC type Nominal coil voltage 6V DC 12V DC 24V DC 48V DC 100V DC 110V DC 12V AC 24V AC 48V AC 100/120V AC 200/240V AC Standard packing: Carton: 20 pcs.; Case: 100 pcs. 4. Screw terminal type (Single side stable) Type DC type AC type Nominal coil voltage 6V DC 12V DC 24V DC 48V DC 100V DC 110V DC 12V AC 24V AC 48V AC 100/120V AC 200/240V AC Standard packing: Carton: 10 pcs.; Case: 50 pcs. Note: The TM type of the screw terminals are also available. * For terminal sockets, see page 198. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB183E 201202-T HE RATING 1. Coil data 1) AC coils Nominal coil voltage Pick-up voltage (at 20°C 68°F) Drop-out voltage (at 20°C 68°F) 70%V or less of nominal voltage (Initial) 15%V or more of nominal voltage (Initial) Pick-up voltage (at 20°C 68°F) Drop-out voltage (at 20°C 68°F) Nominal operating current [±10%] (at 20°C 68°F) Nominal operating power 138mA 1.7VA 74mA 39mA 18.7 to 2.1mA 9.1 to 10.8mA 1.8VA 1.9VA 1.9 to 2.7VA 1.8 to 2.6VA 12V AC 24V AC 48V AC 100/120V AC 200/240V AC Max. applied voltage (at 20°C 68°F) 110%V of nominal voltage 2) DC coils 6V DC Nominal operating current [±10%] (at 20°C 68°F) 320mA 12V DC 24V DC 48V DC 100V DC 110V DC 160mA 80mA 40mA 19mA 18mA Nominal coil voltage 70%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power 18.8Ω 1.92W 75Ω 300Ω 1,200Ω 5,200Ω 6,300Ω 1.92W 1.92W 1.92W 1.92W 1.92W Max. applied voltage (at 55°C 131°F) 110%V of nominal voltage 2. Specifications Characteristics Contact Rating Item Contact material Arrangement Contact resistance (Initial) Nominal switching capacity (resistive load) Max. switching power Max. switching voltage Max. switching current Nominal operating power Min. switching capacity (Reference value)*1 Insulation resistance (Initial) Specifications AgSnO2 type 1 Form A 2 Form A Max. 100 mΩ (By voltage drop 6 V DC 1A) 30A 277V AC 25A 277V AC 8,310VA 6,925VA 277V AC, 30V DC 30A 25A DC: 1.92W, AC: 1.7 to 2.7VA 100mA 5V DC Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section. Between open contacts Between contact sets Between contact and coil Temperature rise (coil) Surge breakdown voltage*2 (between contact and coil) (Initial) Operate time (at nominal voltage) 2,000 Vrms for 1min (Detection current: 10mA.) — 4,000 Vrms for 1min (Detection current: 10mA.) 5,000 Vrms for 1min (Detection current: 10mA.) DC: Max. 60°C (at 55°C) (By resistive method), AC: Max. 65°C (at 55°C) (By resistive method) Breakdown voltage (Initial) Electrical characteristics Release time (at nominal voltage) Functional Destructive Functional Vibration resistance Destructive Mechanical Shock resistance Mechanical characteristics Expected life Conditions Electrical (resistive load) (at 20 times/min.) Conditions for operation, transport and storage*3 Max. operating speed Unit weight Min. 10,000V Max. 30ms (excluding contact bounce time) DC: Max.10ms (excluding contact bounce time, without diode), AC: Max. 30ms (excluding contact bounce time) Min. 98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.) Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 1 mm (Detection time: 10µs.) 10 to 55 Hz at double amplitude of 1.5 mm DC: Min. 107 (at 180 times/min.), AC: Min. 5×106 (at 180 times/min.) Min. 105 (25A 277V AC) Min. 105 (30A 277V AC) Min. 2×105 (30A 250V AC) Min. 2×105 (20A 250V AC) Ambient temperature: –50°C to +55°C –58°F to +131°F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature), Air pressure: 86 to 106kPa 20 times/min. (at max. rating) PC board type: approx. 80g 2.82oz, Plug-in type/TM type: approx. 90g 3.17oz, Screw terminal type: approx. 120g 4.23oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. ASCTB183E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ HE REFERENCE DATA 1 Form A Type 1. Maximum switching power 2. Life curve 3. Coil temperature rise (DC type) Measured portion: Inside the coil Contact current: 30 A 1,000 AC resistive 10 5 DC resistive 1 0.5 70 500 Temperature rise, °C 50 30 20 No. of operations, ×104 Contact current, A 100 100 250 V AC resistive 30 V DC resistive 50 10 60 20°C 50 40°C 40 60°C 30 20 5 10 30 100 500 1,000 0 5 10 Contact voltage, V 15 20 25 30 0 35 100 110 120 Coil applied voltage, %V Contact current, A 4. Ambient temperature characteristics Tested sample: HE1aN-AC120V, 6 pcs. Rate of change, % 30 –50 –20 20 Pick-up voltage x-x 10 Drop-out voltage 20 40 0 –10 60 80 Ambient temperature, °C –20 –30 2 Form A Type 1. Maximum switching power 2. Life curve 3. Coil temperature rise (DC type) 100 1,000 50 30 20 500 AC resistive 10 DC resistive 5 70 60 Temperature rise, °C No. of operations, ×104 Contact current, A Measured portion: Inside the coil Contact current: 30 A 100 250 V AC resistive 30 V DC resistive 50 1 10 0.5 5 20°C 50 40°C 60°C 40 30 20 10 30 0 100 500 1,000 Contact voltage, V 5 10 15 20 25 30 Contact current, A 35 0 100 110 120 Coil applied voltage, %V 4. Ambient temperature characteristics Rate of change, % Tested sample: HE2aN-AC120V, 6 pcs. Pick-up 20 voltage xx- 10 Drop-out voltage –50 –20 0 20 40 –10 60 80 Ambient temperature, °C –20 –30 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB183E 201202-T HE DIMENSIONS (mm inch) 1. PC board type 1 Form A CAD Data The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions Schematic (Bottom view) Single side stable type Single side stable type 33 1.299 38.0 1.496 1 4 6 5 PC board pattern (Bottom view) 24 .945 4.7 .185 8.4 .331 36.3 1.429 0.5 .020 4.7 .185 18.6 .732 4 .157 General tolerance: ±0.3 ±.012 2. Plug-in type 1 Form A CAD Data Tolerance: ±0.1 ±.004 External dimensions Schematic (Bottom view) Single side stable type Single side stable type 36.4 1.433 2-4.5 dia. 2-.177 dia. 1 6 5 Panel cutout 40 1.575 50 1.969 #250 tab terminal 6.35 .250 4 R4 R.157 5 6 8.4 10.25 .331 .404 1 4 33 1.299 0.8 .031 6-2 dia. hole 6-.079 dia. 32 1.260 2-4.5±0.1 dia. 2-.177±.004 dia. 40±0.1 1.575±.004 10.4 .409 Tolerance: ±0.1 ±.004 35 1.378 3.5 .138 0.8 .031 General tolerance: ±0.3 ±.012 2 Form A CAD Data External dimensions Schematic (Bottom view) Single side stable type Single side stable type 1 36.4 1.433 14.4 .567 2-4.5 dia. 2-.177 dia. 1 2 3 4 2 3 6 4 5 33 1.299 6 8.4 10.25 .331 .404 0.8 .031 6.35 .250 R4 R.157 5 Panel cutout 40 1.575 50 1.969 #250 tab terminal 2-4.5±0.1 dia. 2-.177±.004 dia. Tolerance: ±0.1 ±.004 10.4 .409 3.5 .138 40±0.1 1.575±.004 35 1.378 0.8 .031 General tolerance: ±0.3 ±.012 ASCTB183E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ HE 3. TM type Schematic (Bottom view) External dimensions CAD Data Single side stable type Single side stable type 1 Form A 2 Form A 47.6 1.874 36.4 1.433 14.4 .567 47.6 1.874 36.4 1.433 1 4.5 .177 33 1.299 40 1.575 50 1.969 60 2.362 8.4 10.25 .331 .404 6.35 .250 2 3 0.8 .031 3 4 5 Panel cutout 2-4.5±0.1 dia. 2-.177±.004 dia. 10.4 .409 35 1.378 2 2 Form A #250 tab terminal 10.4 .409 5 6 40 1.575 50 1.969 60 2.362 6.35 .250 6 1 R4 R.157 5 8.4 10.25 .331 .404 #250 tab terminal 3.5 .138 4 33 1.299 6 4 1 Form A 4.5 .177 R4 R.157 5 6 0.8 .031 1 4 1 47.6±0.1 1.874±.004 Tolerance: ±0.1 ±.004 35 1.378 3.5 .138 0.8 .031 0.8 .031 General tolerance: ±0.3 ±.012 4. Screw terminal type 1 Form A CAD Data External dimensions Schematic (Bottom view) Single side stable type Single side stable type M4.5 M.177 2-4.5 dia. 2-.177 dia. M3.5 M.138 51.0 2.008 40.0 1.575 14.4 .567 17.5 .689 21.5 .846 16.5 .650 R4 R.157 33.5 1.319 50.0 1.969 1 4 6 5 Panel cutout 2-4.5±0.1 dia. 2-.177±.004 dia. 40±0.1 1.575±.004 7.5 .295 Tolerance: ±0.1 ±.004 44.5 1.752 3.5 .138 0.8 .031 General tolerance: ±0.3 ±.012 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB183E 201202-T HE 2 Form A CAD Data External dimensions Schematic (Bottom view) Single side stable type Single side stable type M4.0 M.157 2-4.5 dia. 2-.177 dia. M3.5 M.138 1 51.0 2.008 40.0 1.575 36.4 1.433 14.4 .567 2 3 6 17.5 .689 21.5 .846 16.5 .650 R4 R.157 33.5 1.319 50.0 1.969 4 5 Panel cutout 2-4.5±0.1 dia. 2-.177±.004 dia. 7.5 .295 40±0.1 1.575±.004 Tolerance: ±0.1 ±.004 44.5 1.752 3.5 .138 0.8 .031 General tolerance: ±0.3 ±.012 MOUNTING METHOD 1. Plug-in type 2. Screw terminal type M4 screw M4 screw Washer 3. Allowable installation wiring size for screw terminal types and terminal sockets Due to the UP terminals, it is possible to either directly connect the wires or use crimped terminal. Washer Faston No. 250 SAFETY STANDARDS Item 1 Form A 2 Form A UL/C-UL (Recognized) File No. Contact rating E43028 30A 277V AC 30A 30V DC 1.5HP 125V AC 3HP 250V AC E43028 25A 277V AC 25A 30V DC 1HP 125V AC 2HP 250V AC CSA (Certified) File No. Contact rating LR26550 30A 277V AC etc. 30A 30V DC 1.5HP 125V AC 3HP 250V AC LR26550 25A 277V AC etc. 25A 30V DC 1HP 125V AC 2HP 250V AC File No. 40006681 40006681 VDE (Certified) Contact rating 30A 250V AC (cosφ =1.0) 30A 250V AC (cosφ =0.4) 5A 110V DC (0ms) TV rating (UL/CSA) File No. Rating UL TV-15 E43028 TÜV (Certified) File No. Rating B 11 04 30A 250V AC (cosφ =1.0) 13461 293 30A 250V AC (cosφ =0.4) 8A 110V DC (0ms) 25A 250V AC (cosφ =1.0) 25A 250V AC (cosφ =0.4) 5A 110V DC (0ms) UL E43028 B 11 04 25A 250V AC (cosφ =1.0) 13461 293 25A 250V AC (cosφ =0.4) 8A 110V DC (0ms) TV-10 NOTES 1. The dust cover should not be removed since doing so may alter the characteristics. 2. Avoid use under severe environmental conditions, such as high humidity, organic gas or in dust, oily locations and locations subjected to extremely frequent shock or vibrations. 3. When mounting, use spring washers. Optimum fastening torque ranges from 49 to 68.6 N⋅m (5 to 7 kgf·cm). 4. Firmly insert the receptacles so that there is no slack or looseness. To remove a receptacle, 19.6 to 39.2 N (2 to 4 kg) of pulling strength is required. Do not remove more than one receptacle at one time. Always remove one receptacle at a time and pull it straight outwards. 5. When using the AC type, the operate time due to the in-rush phase is 20 ms or more. Therefore, it is necessary for you to verify the characteristics for your actual circuit. 6. When using the push-on blocks for the screw terminal type, use crimped terminals and tighten the screw-down terminals to the torque below. M4.5 screw: 147 to 166.6 N⋅cm (15 to 17 kgf·cm) M4 screw: 117.6 to 137 N·cm (12 to 14 kgf·cm) M3.5 screw: 78.4 to 98 N·cm (8 to 10 kgf·cm) For Cautions for Use. ASCTB183E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/